How to set the time on Nissan X-Trail?

2 Answers
SaraLee
07/24/25 4:55am
Here are the steps to set the time on Nissan X-Trail: 1. First, press the vehicle's one-touch start button to start the vehicle, otherwise the adjustment cannot be made. 2. After starting the vehicle, the dashboard will display vehicle information, and then you can switch to the time setting interface using the multifunction steering wheel. 3. Press the RES or SET button on the multifunction steering wheel to adjust the dashboard display interface. 4. When the dashboard displays the time information, you can adjust the time by repeating the above steps. 5. After setting the time, you can use the set time by clicking the OK button on the left side of the multifunction steering wheel.
Was this review help?
7
2
Share
McAutumn
08/11/25 12:33am
When driving my X-Trail, I often need to set the time, especially after long trips. The method is actually quite simple, usually done through the center console screen or instrument cluster menu. First, don't start the engine—just turn the key to the ACC position to power on. Then tap the settings icon on the center console screen and find the clock option—newer X-Trail models might integrate it into the INFO menu. After entering, select adjust time and use the directional buttons or touchscreen to increase or decrease hours and minutes. Don’t forget to confirm and save! Older X-Trail models may require pressing steering wheel buttons to switch options. If the time keeps resetting, check if the car battery is dead or reset, or confirm whether the automatic time zone function is enabled. In short, regular calibration ensures more accurate navigation, especially during long trips when map displays might misalign, affecting driving safety. I make it a habit to check quarterly to avoid minor annoyances.
Was this review help?
19
0
Share
Expand All
More Forum Discussions

Is Driving at 120 km/h Considered High-Speed?

Yes. When taking a high-speed curve: Simultaneously pressing the clutch and brake is the most unsafe practice. Under any circumstances, driving with the clutch depressed increases the vehicle's inertia. You should downshift first and then brake while driving. When turning or changing lanes: First, turn your head to check behind the car before looking at the rearview mirror. This is because poorly adjusted mirrors may have blind spots. Additionally, turning on the turn signal may prompt nearby vehicles to accelerate or slow down, making it impossible to judge the situation accurately based solely on the rearview mirror. While driving: In addition to maintaining a safe distance from vehicles ahead and behind, you should also try to avoid driving side by side with vehicles to your left or right. Either accelerate to overtake or slow down to create space. The biggest drawback of driving side by side is distraction, as it shifts focus from the road ahead to the sides, which can particularly heighten nervousness for beginner drivers.
14
2
Share

What does the ECO mode in the Nissan Qashqai mean?

ECO refers to the car's economical driving mode function. ECO is an English abbreviation formed by the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active Eco driving mode and non-active Eco driving mode. When the Eco indicator light on the dashboard illuminates, it indicates that the vehicle's economical mode has been activated. The Eco mode is categorized into active and non-active types. The difference lies in that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the Eco mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The non-active Eco mode does not have a dedicated button. When the Eco indicator light on the dashboard illuminates, it serves merely as a reminder function. The Eco system automatically evaluates your driving behavior; if your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the Eco indicator light. Most vehicles employ the active Eco driving mode, meaning they have a dedicated switch button. Therefore, during daily driving, we can generally activate the Eco mode. However, it is unnecessary to enable the Eco mode when the speed exceeds 120 km/h, during idle parking, in N/P gear, or in manual mode—especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of the Eco mode but also negatively impact the vehicle's power performance. Additionally, the Eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the system prioritizes speed, causing the Eco mode to automatically deactivate. During idle parking or when in N/P gear or manual mode, the Eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the Eco mode will not operate under these conditions either.
18
0
Share

Where Can I Practice Driving?

Private cars can be used for driving practice, but first, you need to have a driver's license. After that, you can practice on roads with less traffic or in open parking lots or open spaces to familiarize yourself with the car. If you haven't obtained a driver's license yet, you need to go to a driving school for practice. The following are some precautions for driving practice: Precautions for practicing driving include preparations before starting practice and finding an experienced driver to accompany you. Preparations before starting practice. After getting into the car, fasten your seatbelt and adjust the seat position to ensure a good field of vision. Adjust the rearview mirror to the optimal angle. Don't be too nervous, as excessive tension can affect normal driving operations—try to relax. Novice drivers can place a "new driver" sticker on the rear of the car to alert other drivers to give way. Find an experienced driver to accompany you. When practicing, having an experienced driver in the passenger seat can help point out any shortcomings in your driving and ensure greater safety.
6
4
Share

Does replacing the catalytic converter affect the car?

Replacing the catalytic converter does not affect the car, but it may impact the engine's power output. Modern cars are all equipped with catalytic converters. Only vehicles produced in earlier years that fail to meet the National II emission standards lack catalytic converters. Composition of the catalytic converter: A catalytic converter typically consists of four main components: the shell, vibration damping layer, substrate, and catalyst coating. The shell is made of stainless steel to prevent oxide scale detachment, which could lead to substrate blockage. The vibration damping layer is composed of gaskets or wire mesh pads, serving to seal, insulate, and secure the substrate. To protect the substrate from damage caused by vibration or thermal deformation, the gasket is made of expanded mica and aluminum silicate fibers, bonded together with adhesive. The substrate is constructed from honeycomb-shaped ceramic materials, though many are also made of metal (including stainless steel). The catalyst consists of precious metals such as platinum, rhodium, and palladium, which are sprayed onto the substrate to form the purifying agent.
5
2
Share

What are the common issues with the N52B30 naturally aspirated engine?

The N52B30 naturally aspirated engine commonly suffers from oil burning issues. The functions of the engine are: 1. To fully combust the fuel input into the cylinders and generate power; 2. To determine the vehicle's power performance, fuel economy, stability, and environmental friendliness. Taking the 2021 BMW 3 Series as an example, it belongs to the mid-size car category with body dimensions of: length 4719mm, width 1827mm, height 1459mm, wheelbase 2851mm, and a fuel tank capacity of 59 liters. The 2021 BMW 3 Series is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 156PS, maximum power of 115kW, maximum torque of 250Nm, and is paired with an 8-speed automatic transmission.
17
3
Share

Where is the license plate 'Lu J' from?

Lu J is the license plate number for Tai'an City in Shandong Province. The abbreviation for Shandong Province's license plates is 'Lu', and the following letter 'J' represents Tai'an City. Below is a partial introduction to license plates from other areas in Shandong Province: 1. The provincial capital, Jinan, uses Lu A; Qingdao uses Lu B; and Zibo uses Lu C. 2. Zaozhuang uses Lu D; Dongying uses Lu E; and Yantai uses Lu F. Here is an introduction to the composition of license plate numbers: 1. The first character of a license plate is a Chinese character: it represents the provincial-level administrative region where the vehicle is registered, which is the abbreviation of the (province, municipality directly under the central government, or autonomous region). 2. The second character is an English letter: it represents the prefecture-level administrative region where the vehicle is registered, which is the letter code for each (prefecture-level city, region, autonomous prefecture, or league). Generally, the ranking is determined by the provincial vehicle management office based on the status of each prefecture-level administrative region. 3. When assigning letter codes to prefecture-level administrative regions, 'I' and 'O' are skipped. 'O' is often used for police cars or government agencies.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.