How to set the time on Lavida?

3 Answers
McVera
07/23/25 7:05pm
The method to set the time on Lavida is as follows: 1. Start the vehicle and power on the dashboard. 2. Press the SET button on the left side of the steering wheel. 3. Use the up and down option toggle buttons on the right side of the steering wheel to adjust the vehicle time. 4. After adjustment, press the OK button on the steering wheel to confirm. Below is some relevant information about Lavida: 1. Taking the Lavida 2021 model as an example, its body dimensions are 4670 mm in length, 1806 mm in width, and 1474 mm in height, with a wheelbase of 2688 mm, a fuel tank capacity of 51 liters, and a trunk capacity of 510 liters. The Lavida 2021 model is equipped with a 1.4T turbocharged engine, with a maximum power of 110 kW and a maximum torque of 250 Nm.
Was this review help?
4
4
Share
StHarley
08/10/25 2:42pm
I remember tinkering with the Lavida's time settings before. Generally, you operate the radio panel after ignition, where there's a setup button. Press and hold to enter the clock adjustment mode, then use the knob to slowly adjust the hours and minutes. The time often resets after a battery replacement, so I've developed a habit of resetting it whenever the battery is changed to avoid discrepancies when using navigation or syncing with my phone. The Lavida's model variations aren't significant, and the method is similar from the 2010 to 2020 models, with some newer versions using menu scrolling for selection and possible minor adjustments to button positions. Through frequent use, I've found that accurate time settings help in recording fuel consumption, preventing mileage misrecords and incorrect fuel cost calculations. If unsure, consulting the manual or watching YouTube tutorials is the safest approach—never force the buttons and risk damaging the system. Though a small feature, it's not to be overlooked. Over years of driving, I've developed a habit of regularly checking it.
Was this review help?
20
5
Share
Expand All
McWyatt
09/22/25 9:41am
Last time my girlfriend asked me how to set the time, it's quite simple in the Lavida: start the engine, press the settings button near the dashboard a few times, the clock option will pop up in the menu, then use the adjustment wheel on the right side of the steering wheel to scroll and set the numbers. After replacing the battery, it always loses time. That time I forgot to reset it at the repair shop, which messed up the parking records and almost got me a ticket. I suggest keeping a small notebook to jot down the current time regularly, so you can just copy and paste it when resetting for more accuracy. By the way, let's talk about battery maintenance - regular charging can prevent frequent time resets. New car owners shouldn't be afraid of complexity, the steps are straightforward and easy to get used to. After trying a few times, you'll get familiar with it. Online forums sharing experiences are super helpful, and asking friends is also reliable.
Was this review help?
17
0
Share
Expand All
More Forum Discussions

Is it acceptable if the left and right sides are not equally wide when reversing into the garage?

It is considered acceptable. Below is the relevant information about Subject 2: 1. Examination standards: In the Subject 2 test, the criterion for reversing into the garage is not based on the width of both sides but rather on whether the vehicle body crosses the line. Therefore, there is no need to worry about the distance on both sides of the vehicle body. As long as the vehicle body does not cross the line, it is considered normal. 2. Reversing into the garage in Subject 2: This is the first item in the Subject 2 test. If a mistake is made in this item, the Subject 2 test will be deemed a failure. When the vehicle enters the garage, as long as the vehicle body does not cross the boundary line, the distance on both sides of the vehicle is not important. Frequent adjustments to the vehicle body may cause it to cross the line, resulting in test failure. 3. Subject 2 test items: There are five items. The first test item is reversing into the garage, the second is parallel parking, the third is stopping and starting on a slope, the fourth is turning at a right angle, and the fifth is driving through curves. When the vehicle can successfully complete the curve driving, it proves that the test has been passed, and you can check your score on your own.
11
2
Share

What causes the left side to be too wide when reversing into the left bay?

The following are the related reasons for the left side being too wide when reversing into the left bay: 1. Steering too late at the starting point: If the left side is too wide and the right side is too narrow when reversing into the left bay, it is because the steering was done too late at the starting point. Even if you don't adjust the direction and reverse in one go, the right side will still be too narrow! 2. Different turning radii for left and right turns: Due to the different turning radii of the car for left and right turns, the steering point for reversing into the left bay at the starting point usually needs to be slightly earlier than for the right bay. This applies to all test vehicle models! It is essential to improve proficiency in speed control and steering wheel operation and strengthen basic skill practice! 3. Timing is crucial: The situation where the left side is too wide and the right side is too narrow when reversing into the bay often occurs during right bay reversing. Beginners are unfamiliar with the vehicle's performance, have inaccurate judgment of the 30 cm distance, and are not very good at timing the steering at key points. A combination of these factors leads to the issue.
19
0
Share

What are the differences between new cars and used cars?

Differences between new cars and used cars: 1. Performance differences: In terms of performance, the engine and overall performance of a new car are far superior to those of a used car. 2. Differences in appearance and interior: Whether it's the exterior or interior, a new car looks much more comfortable because a used car has already been used by someone else, and the interior may be dirty and worn, while the exterior may also be slightly worse. 3. Differences in fault conditions: New cars rarely have issues, while used cars are more likely to have minor or even major problems. After all, machinery will experience wear and tear over time, and the performance of a new machine is naturally better than that of an old one.
10
4
Share

Which part of the car should the safety hammer strike?

The safety hammer should strike the four corners of the car window glass. Here are specific details about the safety hammer: 1. Usage method: Car glass is a high-strength tempered glass with strong impact resistance. In case of an emergency, use the pointed end of the safety hammer to forcefully strike the four corners of the glass. Once cracks appear, strike a few more times or kick outward with your foot, and the entire glass will fall off. After the glass completely falls off, quickly and orderly jump out of the vehicle and evacuate to a safe area. 2. Common misconceptions: Believing that the center of the window glass is the easiest point to break, focusing all efforts on striking the middle part, or using personal items such as keys, high heels, mobile phones, or wooden sticks as substitutes for the safety hammer.
10
3
Share

What are FAW Toyota's first maintenance regulations?

FAW Toyota's first maintenance regulations are as follows: 1. Time regulation: The first maintenance time is calculated based on the vehicle pickup date, with the purchase invoice serving as the reference. It's advisable to make an appointment with the 4S store before going for the first maintenance. 2. Maintenance cycle: When the vehicle reaches 5,000 kilometers or 3 months, a comprehensive free inspection is required at the 4S store, but no parts will be replaced. The first actual maintenance is due at 10,000 kilometers or 6 months, during which the 4S store waives the first maintenance fee. Subsequent maintenance intervals are recommended by the manufacturer to be every 10,000 kilometers or 6 months.
8
2
Share

Where to Renew an Expired Beijing Driver's License?

To renew an expired Beijing driver's license, you can go to any vehicle management office in Beijing's districts. Below is the relevant information for renewing a Beijing driver's license: 1. Required documents: Original and photocopy of the motor vehicle driver's identity proof; Original receipt for digital photo collection of Beijing motor vehicle driver's license; Original medical institution physical condition proof from Beijing driver's 'one-stop' service; Original motor vehicle driver's license or a written statement of loss of the driver's license. 2. Notes: After the application is successful, do not drive a motor vehicle with the expired original license before receiving the new one; During the process, the applicant and the recipient must be the same person. Please fill in the relevant information truthfully and be responsible for the authenticity and validity of the provided documents; Once the online application at the vehicle management office is approved, it is considered processed, and the fee will be charged immediately with no refunds accepted.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.