How to Set the Time on a Lexus ES?

What are the differences between the Verano Pro and Verano Pro GS?

Differences between the Verano Pro and Verano Pro GS: Exterior differences: The Verano Pro features a winged front grille design, with integrated LED headlights and chrome trim connecting to the grille, along with a three-piece lower bumper, which quickly elevates the overall premium feel of the vehicle. On the other hand, the Verano Pro GS has a more sporty front fascia compared to the Verano Pro, characterized by a larger-sized air intake grille. The Verano Pro GS also sports a small ducktail spoiler at the rear for a more stylish look, along with hidden exhaust tips to enhance the rear's clean appearance. Configuration differences: The Verano Pro GS adopts a wraparound cockpit-style interior, predominantly black with extensive red stitching on the seats and other areas for accentuation. The Verano Pro is equipped with dual 10.25-inch full LCD instrument cluster and center console screens, with a resolution of 1920x720. It comes with the Buick eConnect 3.0 intelligent connectivity system, supporting Apple CarPlay and Baidu CarLife, and includes the iFlytek voice recognition system.

2

0

Share

What Are the Tips to Absolutely Avoid Stalling During the Slope Start in Subject 2?

Here are the tips to avoid stalling during the slope start in Subject 2: 1. Gently apply the throttle: When going uphill, if you don't apply the throttle, it's likely that the idle speed won't be enough to drive the vehicle to start, resulting in a stall. Once the vehicle starts rolling backward, it's hard to avoid stalling. When rolling backward occurs, you must first press the brake and clutch, stop the vehicle, and then start again. 2. Slowly release the clutch: During the slope start, when the left foot slowly releases the clutch pedal until the vehicle starts to vibrate, it should be slightly fixed at this position to confirm whether the vehicle has the tendency and power to move forward. Do not continue to lift the clutch pedal to prevent stalling. When the vehicle starts moving forward, the right hand should completely release the handbrake and slowly apply the throttle. 3. Avoid keeping the clutch in the semi-engaged state for too long: During the starting process, avoid keeping the clutch in the semi-engaged state while pressing the throttle to accelerate. As long as the vehicle is driven by the throttle, it won't roll backward, so you can confidently release the clutch pedal and press the throttle to start.

9

2

Share

Which Tires Should Snow Chains Be Installed On?

Snow chains must be installed on the drive wheels because the chains need to hook onto the set of tires that play the primary role. For front-wheel-drive vehicles, they must be installed on the front wheels, while for rear-wheel-drive vehicles, they must be installed on the rear wheels. The types of snow chains are as follows: 1. Iron/Steel Chains: This type of iron chain is widely used and is the most common and classic variety. Its advantages include being very affordable, durable, and sturdy. The disadvantages are loud noise, difficulty in installation and removal, heaviness, and significant wear on tires. 2. TPU (Thermoplastic Polyurethane) Chains: This is a chemical mixture of PVC, PP, and PT, a relatively modern vehicle anti-skid device developed recently. When unfolded, it forms a whole like a scarf with several diamond patterns in the middle, studded with steel nails. Installation is convenient—simply lay the snow chain flat on the ground. 3. Rubber Chains: These rubber chains are similar in shape to TPU chains but use high-quality rubber that provides strong tensile strength. Additionally, they incorporate nylon threads within the rubber for enhanced tensile resistance.

1

Share

What does 1000r/min mean?

1000r/min is the unit of engine speed. The following are specific details about engine speed: 1. 800/min~1200/min: During cold starts, the idle speed of the ignition engine should be below 800/min or above 1200/min; otherwise, the engine's condition is poor. 2. Below 2000r/min: While driving, try to avoid letting the engine operate below 2000r/min. If the speed is too low, the engine will lack power, and the load on the engine at low speeds can be excessive, causing damage and easily leading to carbon buildup. 3. Above 4000r/min: When the engine operates above 4000r/min, the combustion time becomes shorter, and the fuel does not burn completely, leading to a significant increase in fuel consumption. If driving normally in fifth gear, the speed generally reaches 150km/h, which is already a relatively dangerous speed. 4. 2200~3500r/min: The engine operates most economically and performs best within the range of 2200~3500r/min. During regular use, try to keep the engine speed within this range.

16

2

Share

What are the differences between the Yidong Plus and the Ruicheng CC?

The main differences between the Yidong Plus and the Ruicheng CC are that the Yidong model is longer and has more powerful output. Below is an introduction to the differences between the Changan Yidong and Ruicheng CC: Changan Yidong Plus: The dimensions of this car are 4730mm in length, 1820mm in width, and 1505mm in height, with a wheelbase of 2700mm. It is equipped with a Blue Whale 1.4T engine with a maximum power of 116kW and a peak torque of 260Nm, reaching maximum torque at 1500 rpm. It is paired with a 7-speed dual-clutch transmission. Changan Ruicheng CC: The dimensions are 4490mm in length, 1860mm in width, and 1580mm in height, with a wheelbase of 2710mm. The Changan Ruicheng CC is powered by a 1.5T turbocharged engine with a maximum power of 115kW at 5500 rpm and a maximum torque of 225Nm between 2000-4000 rpm. It is paired with either a 6-speed manual transmission or the latest Aisin third-generation 6-speed automatic transmission.

11

3

Share

Do You Need to Replace Two Tires When One is Damaged?

When one tire is damaged, it is not always necessary to replace two tires. It depends on the wear condition of the other tire. If the wear is severe, it is best to replace both tires together. Below are situations where replacing two tires is recommended: 1. Prolonged Usage: If the tires have been in use for a long time or have high mileage, it is advisable to replace both tires simultaneously. Generally, when a tire has reached half of its lifespan, you can consider replacing both tires, typically after driving more than 40,000 kilometers. 2. Different Tire Brand or Model: If the repair shop does not have the same brand and model of tire as the one on the vehicle and can only provide a different brand, it is recommended to replace both tires for long-term use. The main functions of tires include: 1. Load Bearing: Supporting the entire weight of the vehicle and bearing the load of the car; 2. Traction: Transmitting traction and braking torque to ensure good adhesion between the wheels and the road surface; 3. Damage Prevention: Preventing severe vibrations and early damage to automotive components.

11

5

Share

How to Set the Time on a Lexus ES?

What are the differences between the Verano Pro and Verano Pro GS?

What Are the Tips to Absolutely Avoid Stalling During the Slope Start in Subject 2?

Which Tires Should Snow Chains Be Installed On?

What does 1000r/min mean?

What are the differences between the Yidong Plus and the Ruicheng CC?

Do You Need to Replace Two Tires When One is Damaged?

Is it necessary to use a circulation machine for transmission fluid replacement?

What is the reason for low tire pressure in one tire of a new car?

Can a motorcycle still be registered if the QR code on the certificate of conformity cannot be scanned?

Where are Mercedes-Benz engines produced?