How to Set the Time and Date on the 8th Generation Accord?
3 Answers
The method to set the time and date on the 8th Generation Accord is as follows: Time: Press and hold the SOUND button until you hear a beep, and the time on the LCD display will start flashing. Then, press the 4 button to adjust the hour, the 5 button to adjust the minutes, and the 6 button to set the minutes to 00. Once the correct time is set, press the SOUND button again, and the time will stop flashing, indicating that the time setting is successful. Date: On the air conditioning control panel, there is a CLOCK button. Press and hold it until the time on the display starts blinking. There are small H and M buttons to adjust the date. After setting, press the CLOCK button again to confirm. The Accord is a model under Honda, with body dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, and a wheelbase of 2830mm. In terms of appearance, the front face of the Accord is designed to be more stylish, with angular headlights, a grille, and flared fenders, showcasing a dynamic and sleek temperament.
Setting the time and date on the 8th-generation Accord is something I frequently do as an owner, and I find it quite convenient. First, start the engine to ensure the vehicle is in a parked state. Then, look at the display area in the center of the instrument cluster—there’s a clock icon there. Nearby, you’ll usually find a round knob or a set of buttons. Press it to enter the settings menu. Rotate the knob to select the time adjustment option, at which point the hours and minutes on the screen will start blinking. Adjust them to the correct time by turning the knob clockwise or counterclockwise, then press to confirm. The date setting is similar: select the date menu and adjust the year, month, and day using the same method. Stay focused while operating, and it’s best not to do this while driving to avoid distractions that could lead to accidents. After completing the setup, remember to turn off the engine and restart to test the changes, ensuring no mistakes were made. If the instrument cluster doesn’t respond, check if the car key is in the ON position or refer to the user manual—it has diagrams for clearer guidance. Personally, I check the time accuracy monthly to prevent system resets due to a dead battery in winter. Overall, the whole process takes just two or three minutes and becomes very simple with practice.
The time and date settings for the 8th-generation Accord are primarily controlled through the instrument panel. I prefer to operate it after ignition: locate the buttons on the instrument panel below the right side of the steering wheel, press the MODE button to enter the menu. The current time will be displayed on the screen, then press the ADJUST button to make the hour digits blink, use the volume knob (on the steering wheel or instrument panel) to adjust to the correct value, and press the OK button to save. Next, switch to minutes and follow the same process. Date settings are in the same system—select the DATE option and adjust the year, month, and day in sequence. It's recommended to operate at night when the lighting is dim for better screen visibility. Avoid pressing the buttons too many times in a row to prevent system freezing; if confusion occurs, try holding down the power button to reboot the instrument panel. The entire process is based on the vehicle's electronic system, applicable to older models produced between 2008 and 2012, though there may be slight differences between the Sedan and Coupe—the Coupe may use more steering wheel shortcuts. Regularly checking for system firmware updates during maintenance can improve accuracy.