···
Log in / Register

How to Set the Seat Retraction When Turning Off the LaCrosse?

4 Answers
MacMila
07/29/25 7:40am

To set this, press the 1 and SET buttons while the ignition is on. A short beep will indicate that the setting is successful. Here is some related information: 1. The LaCrosse has a body length of 5026mm, width of 1866mm, height of 1462mm, and a wheelbase of 2905mm. It adopts Buick's latest family design language, featuring smooth and elegant body lines and a highly dynamic body proportion. The full LED automatic sensing headlights with wing-shaped design use Evonik material to create a uniform light curtain effect. 2. For the interior, it features the exclusive Merlot Red elegant color and the Avenir emblem. The diamond-shaped three-dimensional mesh grille, inspired by the texture design of knight armor, further highlights the family's aesthetic heritage. The exclusive 19-inch crown-shaped aluminum alloy wheels draw design inspiration from the crowns of high-end watches, symbolizing the meaning of time during the journey.

Was this review help?
13
3
Share
StJune
08/13/25 1:52am

When driving, the Buick LaCrosse's seat retraction feature makes getting in and out easier, and setting it up isn't too complicated. First, get in and start the engine, then adjust the seat to your preferred exit position—like moving it back for easier door access. Next, navigate to the settings menu on the central display, typically by tapping the vehicle icon and entering the seats or comfort features options. Look for a memory setting option, where you can save the current seat position to memory button 1 or 2, then confirm. Check if the system has an automatic execution feature upon engine shutdown; if not, you may need to manually press the memory button before turning off the engine to activate the seat movement. When saving the position, ensure it's not too far back to avoid inconvenience when getting in next time. After setup, don’t forget to test it: turn off the engine once to see if the seat actually retracts. This feature can also be linked to key memory for different drivers, making daily driving more convenient—it's worth taking the time to set up properly. Always refer to the user manual, as details may vary slightly between model years.

Was this review help?
5
5
Share
Expand All
McJeremiah
10/04/25 8:29am

I fell in love with the intelligent design of my newly acquired LaCrosse, especially the seat retraction feature when turning off the engine. Here's my experience: While exploring settings after purchase, I discovered it could memorize positions for different scenarios. The setup process is intuitive: First, start the vehicle and adjust the seat to a comfortable retracted position for exiting – not too far back to avoid affecting driving. Then navigate through the central display to settings, select seat memory, and save the current position. Finally, enable this position in the comfort entry options for execution when turning off the engine. Once saved, the seat automatically retracts upon engine shutdown and returns when starting, eliminating manual adjustments. Initially, it didn't work because I skipped testing; later, I realized the settings needed confirmation. I recommend checking key associations to ensure it only responds to your commands. Proper setup enhances travel elegance and reduces in-car fatigue. Exploring menu functions reveals more thoughtful, user-friendly features.

Was this review help?
3
3
Share
Expand All
DiMicah
11/18/25 3:17am

Setting up the LaCrosse's automatic seat retraction when turning off the engine is not difficult. Start the car and adjust the seat to your preferred retracted position. Then, navigate to the vehicle settings on the center console screen, find the seat options, and select the memory function to save a memory button position. Check the comfort entry menu if available and enable the automatic execution of the retracted position when turning off the engine. If the automatic option is not found, you can manually trigger the retraction by pressing your set memory button before turning off the engine. After completing the setup, test whether the seat moves correctly. Avoid setting extreme positions to prevent issues. Refer to the owner's manual for detailed instructions to ensure proper setup for daily convenience.

Was this review help?
12
5
Share
Expand All
More Forum Discussions

Is it okay if an Audi hasn't had its transmission fluid changed for 120,000 kilometers?

It is not okay. Not changing the transmission fluid for 12 years can cause friction in the transmission, leading to the generation of fine debris and impurities. The transmission fluid will become cloudy, and its performance will degrade. Below is an introduction to the transmission: Introduction: The transmission, also known as a gearbox, is an automotive component used to alter the speed and torque from the engine and can fix or change the gear ratio between the output and input shafts. Structure: The transmission consists of a gear transmission mechanism and a control mechanism. Some vehicles also include a power output mechanism. Transmissions can be categorized into stepped, continuously variable, and integrated types, with functions such as enabling reverse driving, interrupting power transmission, and changing gear ratios. Function: Changing the gear ratio expands the range of torque and speed variations of the driving wheels to adapt to frequently changing driving conditions, while allowing the engine to operate under favorable conditions (higher power and lower fuel consumption).
9
0
Share

How Deep Can a Tesla Go Through Water?

Water fording depth is measured at the midpoint of the wheel rim. Below is relevant information: Water Fording: Since Tesla's high-voltage battery pack has no ventilation valves and undergoes rigorous testing before leaving the factory, the entire powertrain has excellent sealing. However, this does not mean Tesla vehicles are amphibious; avoid driving through deep water whenever possible. Overview: Ground clearance is one of the key factors affecting a vehicle's water fording capability. Among Tesla's current models, the Model 3 midsize sedan has a minimum ground clearance of 138mm, the Model X midsize SUV has 137mm, and the Model S midsize car has 116mm.
16
0
Share

How much electricity does a Tesla consume with the air conditioning on for one hour?

At idle, it consumes approximately 1.5L-2L per hour. Here is some relevant information: Underground parking: Parked in an underground garage with a temperature of 29 degrees, the air conditioning was set to 20 degrees and used for 40 minutes, consuming 6 km of range, equivalent to about 840Wh of electrical energy. Based on this calculation, one hour would consume approximately 9 km of range, with an electrical energy consumption of 1.26kWh. Introduction: Ground clearance is one of the key factors affecting a vehicle's wading capability. Among the currently available Tesla models, the Model 3 mid-size sedan has a minimum ground clearance of 138mm, the Model X mid-size SUV has a minimum ground clearance of 137mm, and the Model S mid-size car has a minimum ground clearance of 116mm.
6
2
Share

What is the name of NIO's voice assistant?

On February 25th, GAC NIO officially released its in-car voice assistant. This voice assistant is named "Xiao CAN" and will be equipped in GAC NIO's first model, the HYCAN007. Below is the relevant information: Xiao CAN: Xiao CAN measures 2 inches in size and currently has over 30 different expressions, with more than 100 additional expressions under development according to official sources. Additionally, users can become "Xiao CAN" trainers through a mobile app, helping Xiao CAN acquire more skills. GAC NIO: Last May, GAC and NIO jointly launched a new brand called "HYCAN," with Mr. Liao Bing serving as CEO. Currently, HYCAN has introduced an SUV model named HYCAN007. The vehicle comes with two range versions: 523km and 643km, and the new car is set to be launched and delivered in April.
5
5
Share

What is the fuel consumption of the Peugeot 308?

The data from the Ministry of Industry and Information Technology shows urban fuel consumption at 10.7L, highway at 5.8L, and combined at 7.6L. Feedback from car owners varies widely, ranging from 7L to 20L. On highways, it's generally 6L-7L per 100 kilometers, while in urban areas, it's 9.6L-11L. However, it's recommended not to use automatic transmission in urban areas; instead, using manual mode in a semi-automatic transmission can save some fuel. The reasons for high fuel consumption in cars are as follows: Reason one: Poor driving skills. The same car driven by different people will have different fuel consumption. Only by summarizing experience and improving driving skills can the high fuel consumption caused by poor driving be resolved. Reason two: Issues with the spark plugs or high-voltage wires in gasoline cars, causing abnormal ignition circuits. This can be fixed by repairing or replacing the parts to reduce fuel consumption. Reason three: Problems with the braking system, such as brake pads not retracting, increasing driving resistance. This can be resolved by repairing to restore and lower fuel consumption. Reason four: Blocked fuel lines or carbon buildup. Using fuel system cleaner to clean the fuel injectors and throttle body can reduce fuel consumption. Reason five: Dirty air filter causing poor airflow, leading to incorrect fuel-air mixture. Replacing the filter can solve this. Reason six: High temperatures and humidity in summer seasonally increase fuel consumption. Reason seven: High driving speed and heavy car load result in higher fuel consumption. Reason eight: Poor-quality gasoline that doesn't meet standards leads to higher fuel consumption.
15
5
Share

Should I Buy the 4WD Version of the Tharu?

The Tharu is positioned as an urban SUV, and its 4WD system can provide more stability assurance for daily driving. It is equipped with the 4Motion full-time 4WD system, not an on-demand 4WD. Below is relevant information: Tharu: The Tharu is built on the MQB platform, with an appearance similar to its larger sibling, the Teramont, maintaining a traditionally stable and rugged image. The front face still follows the traditional Volkswagen design language, presenting a solid and powerful visual effect, continuing the conventional and steady image. Interior: The Tharu's interior retains the familiar Volkswagen family design, offering two interior styles: Elegant Black and Stylish Brown. The materials used are relatively average, with large areas of hard plastic clearly a cost-saving measure by the manufacturer, resulting in a slightly lacking sense of luxury.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.