How to set the one-touch up/down function for the window buttons on the Changan CS75?
4 Answers
The method to set the one-touch up/down function for the window buttons on the Changan CS75 is: 1. Lower the window completely, then raise it; 2. When the window reaches the top, do not release the button immediately, wait until you hear a click sound. The Changan CS75 is a compact SUV. Taking the 2021 Changan CS75 as an example, its body dimensions are: length 4650mm, width 1850mm, height 1715mm, with a wheelbase of 2700mm. The 2021 Changan CS75 is equipped with a 1.5L turbocharged engine, delivering a maximum power of 131kW. It features a MacPherson independent front suspension and a multi-link independent rear suspension.
I've been driving the Changan CS75 for a while, and the one-touch window function is quite convenient to set up. Typically, you first press and hold the window down button to lower the glass completely to the bottom, then pull up the window up button to raise it to the top and continue holding for about 5 seconds. You'll hear a slight 'beep' sound or see the window move slightly, indicating the setup is complete. I remember it didn't work the first time I tried, but later I found out it was because the window track was a bit dusty. After cleaning it, it worked smoothly. It's recommended to start the engine during operation to prevent power loss. After setting it up, test it a couple of times repeatedly. The one-touch up and down feature is really time-saving and effortless, especially convenient and safe when driving on the highway.
The one-touch up/down window function of the Changan CS75 is super practical and easy to set up. First, lower the window completely and hold it there, then press and hold the up button to raise it to the top and keep holding for a few seconds without releasing. The system will automatically record the position, and you're done. I've noticed that if there's resistance on the glass or the switch malfunctions, it might fail. In such cases, check if the track or switch connector is loose. Once set up successfully, the one-touch operation is effortless and efficient. Regularly ensure that the windows don't get water or debris inside to prolong the function's lifespan.
The steps to set one-touch up/down are simple: lower the window completely to the bottom, then pull the up switch to the top and hold it for a few seconds until the setting takes effect. If there's no response, the window may not be in the correct position or the system needs a restart. After setting, test the one-touch function to ensure quick opening/closing in emergencies.
