How to Set the Maintenance Mileage for the Tiguan?

1 Answers
Morales
07/25/25 5:27am
The Tiguan does not allow users to set the maintenance mileage themselves. The Tiguan is a compact SUV under the Volkswagen brand, with dimensions of 4506 mm in length, 1809 mm in width, and 1685 mm in height, and a wheelbase of 2684 mm. This vehicle is equipped with two engine options: a 1.4-liter turbocharged engine and a 1.8-liter turbocharged engine. The 1.4-liter turbocharged engine delivers a maximum power of 110 kW and a maximum torque of 250 Nm, with the maximum power achieved at 5000 rpm and the maximum torque available between 1750 to 3000 rpm. The 1.8-liter turbocharged engine produces a maximum power of 118 kW and a maximum torque of 250 Nm, with the maximum power range from 4500 to 6200 rpm and the maximum torque available between 1500 to 4500 rpm.
Was this review help?
9
3
Share
More Forum Discussions

What to Do When Your Driver's License Reaches 12 Demerit Points?

Full-point exam is the most conventional method, primarily applicable to cases where 12 points are deducted at once. Since the deducted points cannot be split, they must be deducted in one go. This cross-cycle approach mainly targets drivers who have accumulated 12 demerit points, allowing them to handle the points in batches around the start and end of the demerit point cycle. This method is also aimed at situations where 12 points have been accumulated. Among these, 6 points can be offset by taking the study and exam on the "Traffic Management 12123" mobile app. This point-clearing method is also for cases where 12 points have been accumulated. The "one license for three vehicles" rule means that one driver's license can only be used to clear points for three different motor vehicles.
14
0
Share

How to Instantly Correct a Reversed Rearview Image?

First, open the settings interface of the car navigation system and locate the 'Rearview Mirror Image' option within the settings. By default, the status behind this option is set to 'On'. Change the status of the 'Rearview Mirror Image' setting to 'Off' with a simple tap of your finger, and it will be set to the 'Off' status. After turning off the 'Rearview Mirror Image' function, check if the rearview image has returned to normal. Engaging the reverse gear will show that the rearview image has been corrected and is now normal. When selecting a rearview camera, ensure it is compatible with your vehicle model by considering factors such as camera model, power voltage, screen size, waterproofing, and anti-interference capabilities.
4
5
Share

How to Turn on the Ambient Lights in a Pajero?

First, insert the key into the vehicle's ignition switch and turn it to the ON position. Locate the main lighting control knob on the left side at the bottom of the steering wheel. Gently press the main lighting control knob downward by 1-2 millimeters. Note that only a light press of 1-2 millimeters is needed. Turn the vehicle's lighting control knob counterclockwise until it reaches the end, then release it to turn on the ambient lights. If you need to turn off the ambient lights, simply turn the main lighting control knob counterclockwise back to its original position.
11
3
Share

How to Remove the Windshield Panel of Volkswagen Touran?

Remove the wipers and rain deflector at the front of the vehicle. Use a flat-head screwdriver to slowly remove the black protective strip around the windshield. Thread a steel wire through the sealant under the windshield. One person inside the car and one outside, pull back and forth to slowly separate the sealant until all the sealant around the entire windshield is loosened. Use a small knife blade to slowly scrape off the black sealant remaining on the car, then use sandpaper for final cleaning, and carefully remove the car windshield panel.
9
0
Share

How to Remove the Windshield Wiper of Jingyi?

Prepare the necessary tools for removing the windshield wiper: a flat-head screwdriver, a small ratchet, and a 13mm socket. Open the front hood of the car, take out the flat-head screwdriver, and use it to pry off the small black cover of the windshield wiper. Take out the small ratchet, attach the 13mm socket, and remove the nut that secures the windshield wiper. Fold the windshield wiper by hand, hold it firmly, and shake it repeatedly until it loosens, then remove the wiper.
9
1
Share

How to Install CarPlay if the Original Vehicle Doesn't Have It?

Add a CarPlay module to the original vehicle's infotainment system, which comes in wired and wireless versions. It's simple, convenient, doesn't damage any original wiring, and is cost-effective. Replace the entire original infotainment system. This method is only recommended for original systems, as it may damage the original infotainment system and wiring. Use an adapter to enable CarPlay functionality, but you need to choose the right one based on your vehicle's infotainment system. Whether to install CarPlay depends on personal needs, and it should be done with minimal damage to the original wiring.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.