How to Set the Maintenance Mileage for BAIC Senova?
3 Answers
There are two methods for setting the maintenance mileage for BAIC Senova. Below are the relevant instructions: 1. Manual reset method: Turn on the ignition switch, press the MENU button on the multifunction steering wheel, and locate the maintenance information. Enter the maintenance information, hold down the ENTER key for 30 seconds, and select 'Yes' when the reset option appears. The manual maintenance reset is now complete. 2. Visit a repair facility to perform the maintenance reset using specialized diagnostic equipment. Do not reset the maintenance display between maintenance cycles to avoid incorrect display. The maintenance reminder function is only an auxiliary tool; the detailed maintenance intervals should still follow the maintenance regulations. If the car battery is disconnected for an extended period, the system may not correctly calculate the next maintenance due date.
The maintenance mileage setting operation for BAIC Senova is actually not difficult to master. After turning on the vehicle's power without starting the engine, locate the button area on the left side of the steering wheel and long-press the menu button to enter the settings interface. At this point, the dashboard will display multiple options. Use the up and down buttons to switch to the vehicle information section, where there is a maintenance cycle submenu. After entering, you can see the current remaining mileage, then select the reset function and long-press the confirm button for about five seconds until the system prompts that it has been reset. After completing these steps, remember to turn off the engine and restart to check if the warning light disappears. Be careful during operation as the interface design varies between different model years. For example, my 2016 manual transmission model has different buttons compared to my friend's 2019 automatic transmission model. It is recommended to refer to the diagrams in the owner's manual to avoid accidentally triggering other settings. The maintenance reminder is crucial as it alerts you to change the engine oil and three filters in time, thereby extending the engine's lifespan.
As a veteran Saab owner, let me share how to reset the maintenance reminder. Turn the ignition switch to the ON position, and when no warning lights are illuminated on the dashboard, locate the button area with letters on the right side of the steering wheel. First, use the up and down arrow keys to switch function pages. When vehicle information is displayed, press and hold the OK button for three seconds to enter the submenu. Then select the maintenance interval interface, which shows the mileage until the next service. Here's the key point: simultaneously press and hold the confirm button and return button for ten seconds, at which point the numbers will flash and reset to the base value of 5,000 kilometers. For some newer models, you'll also need to synchronize the settings on the central display screen. It's recommended to perform this operation immediately after maintenance to avoid forgetting. After resetting, it's best to record the current total mileage for future reference, and you should also check the tire pressure while you're at it.
