How to Set the Lock Beep Sound for Volkswagen Bora?

How many minutes does it generally take for an electronic eye to automatically capture illegal parking?

According to relevant regulations, if the illegal parking is captured by an electronic eye within 5 minutes, it is not considered a violation. However, if the illegal parking exceeds 5 minutes, it will be recorded and penalized. Determination of illegal parking penalties: Currently, the working procedure of electronic eyes capturing illegal parking is as follows: when a vehicle enters a no-parking zone, the electronic police will automatically take a photo. If the vehicle leaves within 5 minutes, this photo will be automatically deleted. If the vehicle remains parked illegally for more than 5 minutes, the electronic police will take a second photo and upload it to the system simultaneously. The penalty for illegal parking will be imposed, but no points will be deducted. Only when both photos are uploaded will they be transmitted to the penalty system. Handling violations through 12123: Log in to the 12123 software, select 'Violation Handling,' then check the violation records of the motor vehicle. Choose the unpaid violation that needs to be processed, click 'Handle and Pay' at the bottom, and the process will be completed.

10

3

Share

What is the difference between full slicks and semi-slicks?

Semi-slick tires have softer sidewalls compared to full slicks, and they are less demanding in terms of temperature. Full slick tires require higher temperatures and specific road conditions, and they provide better grip than semi-slicks. Full slicks are typically used in racing and are not suitable for street use. The details are as follows: 1. Full slicks: Full slick tires are designed to melt into a gel-like state as they heat up from friction with the road surface during use. In this state, they offer excellent grip, but the downside is obvious—they wear out very quickly when melted. Therefore, full slicks are mostly used in situations where high grip is required without much concern for cost, such as in circuit racing. Full slicks are tires that melt or turn into a gel-like state at certain temperatures. 2. Semi-slicks: Semi-slick high-performance tires are manufactured with chemical materials like Kevlar fiber (low density, high strength, good toughness, heat resistance, and non-conductivity) to provide certain heat-melting characteristics. Through tread pattern and drainage groove design, they can offer strong grip while also having excellent water drainage. Compared to full slicks, semi-slicks are highly cost-effective.

7

2

Share

What Kind of Vehicle is Used for Firefighting?

Fire trucks are specialized vehicles designed specifically for extinguishing fires. These vehicles are typically painted red and are equipped with water pumps, hoses, fire extinguishing agents, multi-stage ladders, and other firefighting and rescue equipment. They can also transport firefighters. Based on their structure and the type of fire extinguishing agent used, fire trucks are categorized into six types: Fire command vehicles; Pump fire trucks equipped only with water pumps, water cannons, and hoses, which utilize nearby water sources to extinguish fires; Water tank fire trucks equipped with water tanks, water pumps, water intake devices, and water cannons, used for extinguishing general material fires; Foam fire trucks and foam-dry powder combination fire trucks used for extinguishing oil fires or general material fires; Elevated water stream fire trucks, aerial platform fire trucks, and ladder fire trucks used for extinguishing high-rise building fires and rescuing people; Simple fire trucks equipped with minimal firefighting equipment, which are manually dragged and operated. Classification based on the manufacturer's designated maximum total mass: Fire trucks can be classified into light-duty fire trucks, medium-duty fire trucks, and heavy-duty fire trucks based on the manufacturer's designated maximum total mass.

8

0

Share

What Causes Unstable Idle Speed When the Car Air Conditioner Is On?

When the air conditioner is turned on, the compressor also starts working. Since the compressor is driven by the engine, its operation increases the load on the engine. The specific reasons are as follows: 1. Insufficient Power: For most electronic throttle systems, the engine automatically increases the throttle opening to draw more air, thereby boosting output power. If the car has been used for a while and the throttle has not been maintained for a long time, carbon deposits may form, obstructing the engine's air intake. This can lead to insufficient engine power or barely enough to drive the compressor, resulting in unstable idle speed that fluctuates when the air conditioner is on. 2. Component Failure: If it's a new car, carbon deposits on the throttle are unlikely to occur so early. In this case, the issue might be due to failures in other components, such as the air intake sensor or fuel injector, causing the engine control unit to mistakenly perceive a temporary high load. It then attempts to compensate for the idle resistance by increasing the engine speed. However, when the engine speed drops, it cannot handle the load from the air conditioner compressor, prompting another increase in speed. This back-and-forth adjustment manifests as unstable idle speed.

16

2

Share

What Causes High Low Pressure and Normal High Pressure in Car Air Conditioning?

When a car's air conditioning system shows high low pressure and normal high pressure, it may be caused by a malfunctioning or damaged air conditioning expansion valve. Below is more information about high low pressure and normal high pressure in car air conditioning: 1. Solution: The solution for high low pressure and normal high pressure in car air conditioning is quite simple. Just remove the air conditioning expansion valve and check if it is functioning properly. If it is indeed faulty or damaged, simply replace it. 2. Normal operating pressures for high and low pressure: Under normal conditions, when the compressor is running at 1500-2000 rpm, the high pressure should be around 1.5-2.0 MPa, and the low pressure should be around 0.15-0.35 MPa. If the ambient temperature around the vehicle is high, the high pressure may reach around 2.5-2.8 MPa, but it generally should not exceed 3.1 MPa, otherwise the pressure protection switch will be triggered. 3. Note: Since the car air conditioning system's expansion valve is located on the firewall side of the vehicle, disassembly is quite inconvenient. Additionally, temporary recovery of the refrigerant is required, making the process labor-intensive. Therefore, it is recommended to visit a 4S shop for this service, as attempting to do it yourself may lead to the opposite of the desired result.

2

0

Share

What Causes Jerking Sensation After Refueling a Car?

Jerking sensations in a car are definitely related to two major components: the engine and the clutch. Possible factors causing jerking during low-speed acceleration after refueling include engine oil passage blockage, automatic transmission startup, or transmission damage. Below are the specific details: 1. Engine Oil Passage Blockage: If a car experiences jerking while driving, the engine is certainly involved. The engine's ignition, air intake, and fuel injectors collectively determine fuel combustion, which is the source of the engine's power. If the air intake volume decreases, ignition weakens, or fuel injection reduces, the power output will be insufficient, leading to jerking sensations. 2. Automatic Transmission Startup: Jerking during the startup of an automatic transmission car is normal. If you want to accelerate quickly while driving, you need to press the accelerator deeply. At this point, the automatic transmission will downshift to increase engine speed. When the speed reaches a certain level, it upshifts again. Since the speed will drop significantly after upshifting, a relatively noticeable jerking sensation occurs. 3. Transmission Damage: If the jerking is more severe than usual, consider whether the transmission is damaged. For example, persistent dirt and impurities inside, especially when accumulated in the valve body, can form blockages, preventing effective regulation of oil pressure and causing jerking, impact, or slippage issues.

13

3

Share

How to Set the Lock Beep Sound for Volkswagen Bora?

How many minutes does it generally take for an electronic eye to automatically capture illegal parking?

What is the difference between full slicks and semi-slicks?

What Kind of Vehicle is Used for Firefighting?

What Causes Unstable Idle Speed When the Car Air Conditioner Is On?

What Causes High Low Pressure and Normal High Pressure in Car Air Conditioning?

What Causes Jerking Sensation After Refueling a Car?

Is a Fire Extinguisher Required for New Car Registration?

What are the reasons for brake light failure?

What is the trick to driving in a straight line?

Is it necessary to install a windshield on a motorcycle?