How to Set the Lock Beep Sound for Geely Binyue

1 Answers
Johnny
07/28/25 4:46pm
First, sit inside the car and check whether the gear lever is in the P position. If not, shift it to P. Without pressing the brake pedal, simply press the one-touch start button twice to power on the vehicle without starting the engine. After closing all doors, press and hold the lock button for more than 10 seconds to reactivate the lock beep function.
Was this review help?
6
3
Share
More Forum Discussions

Which one is the headlight in Subject 3?

Headlights refer to the vehicle's high beam, low beam, and turn signals. In the Subject 3 exam, turning on the headlight means turning on the low beam, and only the low beam is allowed. This is because each instruction in Subject 3 is interconnected. If you start with the high beam, subsequent operations cannot be performed. When using headlights, pay attention to the following points: Keep the headlight lens clean: Especially when driving in rain or snow, dirt and dust can reduce the headlight's illumination performance by 50%. Some models are equipped with headlight wipers and washers. When two vehicles meet at night: Vehicles should switch from high beam to low beam when they are 150m apart to ensure driving safety. Ensure the performance of the headlights: After replacing the headlights or every 10,000 km driven, the headlight beam should be checked and adjusted. Regularly check the bulbs, wiring sockets, and grounding for oxidation and looseness: Ensure that the connectors have good contact performance and reliable grounding. If the connection is loose, turning on the headlights may cause current surges due to circuit interruptions, which can burn out the filament. If the connection is oxidized, the bulb brightness may decrease due to increased voltage drop at the connection point.
13
3
Share

How Many Times Can You Take the Driving Test (Subject 3) in a Month?

Subject 3 driving test is conducted twice a month, once at the beginning and once at the end of the month. Generally, each person can only take the test once per month. The comprehensive evaluation standard for the Subject 3 test stipulates a full score of 100 points for road driving skills, with a passing score of 90. Below are the precautions for the Subject 3 test: Precautions before getting into the car: Walk around the front of the car from the right side to the driver's door, observe if there are any obstacles on the road ahead, and check for approaching vehicles from behind. Ensure safety before opening the door and getting in. Precautions for starting the car: Quickly adjust the seat and the three rearview mirrors (left, center, right), fasten the seatbelt, and check the dashboard. After receiving permission, press the clutch, shift to first gear, turn on the left turn signal, honk the horn, check the rearview mirrors, and confirm safety. Slowly release the clutch to the semi-engaged position while simultaneously releasing the handbrake with the right hand to start smoothly. Precautions after starting: After starting, do not rush to change lanes to the left immediately. Keep the steering wheel steady and pay attention to gear changes. From driving straight to overtaking, observe the rearview mirrors, turn on the turn signal 5 seconds in advance, and then change lanes.
13
0
Share

Do modified wheels need to be registered?

Whether modified wheels need to be registered depends on different situations: 1. If the size of the wheel rim remains unchanged and only the style of the wheel hub is altered, registration is not required; 2. If the size of the wheel rim is changed, registration is necessary. The wheel hub is the rotating part of the tire's inner contour connected by columns to the wheel core, which is the metal component mounted on the axle that supports the tire, also known as the rim, steel ring, or wheel. Wheel hubs come in various types based on diameter, width, manufacturing method, and material. The maintenance methods for wheel hubs are: 1. When the vehicle is in a humid area, the wheel hub should be cleaned frequently to prevent salt corrosion on the aluminum surface; 2. If necessary, after thorough cleaning, wax can be applied to the wheel hub for maintenance to keep it shiny; 3. When the wheel hub is at a high temperature, it should be allowed to cool naturally before cleaning. Do not use cold water to clean it, as this can damage the aluminum wheel hub, cause the brake disc to deform, and affect braking performance. Using cleaning agents to clean the wheel hub can cause chemical reactions on its surface, leading to loss of shine.
16
5
Share

Can a C1 license be directly upgraded to a B2 license now?

C1 can be directly upgraded to B2, but certain conditions must be met, including age range, driving experience, no penalty points within a specific period, no history of drunk or drug driving, and no involvement in major traffic accidents. Age range: The standard age range for a C1 driver's license is from 18 to 70 years old. After the new regulations were issued, the 70-year-old age limit was removed. Starting from November 20, 2020, the upper age limit for applying for large and medium-sized passenger and truck licenses was adjusted to below 60 years old. Driving experience and no penalty points within the period: A B2 license can be directly applied for within the age limit. However, for a C1 license holder to upgrade to a B2 license, in addition to meeting the driving experience requirements, there must also be no record of accumulating 12 penalty points in the current scoring cycle (this year) and the most recent scoring cycle before application (last year). This is also considered for safety reasons. No history of drunk or drug driving: Currently, these behaviors are strictly monitored in China. If caught, the penalties may range from point deductions and fines to severe cases resulting in license revocation or loss of driving privileges. No involvement in major traffic accidents: There should be no record of causing major traffic accidents, especially those resulting in fatalities. If such behaviors are found during the record check, the application for a B2 license will be denied.
4
5
Share

Can the Driving Test Subject 3 Be Taken Twice?

Subject 3 of the driving test can be taken twice. If you fail the first attempt on the day of the test, you can take it a second time. Passing the second attempt means you have successfully completed Subject 3. If you fail again, you must wait 10 days before retaking the test. Below are the detailed regulations: Regulations for Subject 3: During the validity period of the learning driving permit, the number of scheduled attempts for the Subject 3 road driving skills test cannot exceed five. If you fail the fifth attempt, all previously passed subjects will be invalidated. You cannot use your own vehicle for the Subject 3 driving test; you must use the driving school's vehicle. Before obtaining a driver's license, except for practicing in a training vehicle, driving any other motor vehicle is illegal. Subject 3 Test Items: Subject 3 consists of 16 test items: vehicle preparation, starting, straight-line driving, gear shifting (acceleration and deceleration), left turns at intersections, right turns at intersections, lane changing, passing through intersections, pulling over, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and night driving.
16
2
Share

Do I Need to Go Every Day for Subject Two?

Subject Two does not require daily attendance; it mainly depends on the driving school's arrangement. Each driving school instructor has their unique teaching methods, and even within the same driving school, different instructors may teach differently. Therefore, after attending the driving school, you should primarily follow what the instructor teaches. Subject Two Test Items: The C1 car test items include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and curve driving (commonly known as S-curve) (some regions also include a sixth item: high-speed toll card collection). The C2 test items include four mandatory tests: reversing into a garage, parallel parking, turning at a right angle, and curve driving (commonly known as S-curve). Subject Two Test Standards: The full score is 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 is required to pass. For other vehicle types, a score of 80 is required to pass.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.