How to set the interior lighting for the Trumpchi GS4?

2 Answers
VanEvelyn
07/25/25 5:13am
Press the front overhead light DOOR switch once to activate the automatic overhead light function. Press the DOOR switch again to deactivate the automatic overhead light function. Press the left or right front overhead reading light switch once to turn on the corresponding side's reading light, and press it again to turn it off.
Was this review help?
7
3
Share
KiaraLynn
08/10/25 5:39pm
I've been driving the Trumpchi GS4 for two years, and the interior light settings are very straightforward. The overhead control panel for the front row has individual switch buttons labeled OFF/DOOR/ON modes. Usually, setting it to the DOOR position is the most practical—lights automatically turn on when the door opens and turn off 30 seconds after closing, which is super convenient for grabbing things at night. To manually turn on the lights, just press the ON position, which I use when searching for items inside the car. The rear lights are located on both sides of the roof and can be operated in the same way. Remember to check if it's set back to DOOR before turning off the engine, or it might drain the battery. If the lights don't work, first check the switch position, then see if the bulb is burnt out—replacing it with an LED bulb yourself only costs about ten yuan.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

How to Use the Cruise Control in Passat?

Steps to use the cruise control in Passat: 1. The cruise control buttons are located on the left side of the steering wheel; 2. Press the cruise icon button, and the cruise icon on the dashboard will light up, indicating the cruise control is in standby mode; 3. Accelerate the vehicle to the desired speed, then press the SET button to activate cruise control. Release the accelerator, and the vehicle will continue at the current speed; 4. Use the - and + buttons to decrease or increase the speed; 5. To temporarily pause the cruise function, lightly press the brake. To resume cruise control, press the RES button; 6. Press the middle button to adjust the following distance, with five levels to choose from.
7
1
Share

What are the methods for testing engine oil quality?

Testing method: Use slow qualitative test paper. Steps are as follows: 1. Take out the oil dipstick, drop a drop of oil from the dipstick onto the slow qualitative test paper, place the test paper horizontally, and let it stand for 24 hours. 2. Three rings will appear on the test paper. 3. Sediment ring: At the center of the spot is where coarse particle impurities in the oil accumulate. The color depth of the sediment ring can roughly indicate the degree of oil contamination. 4. Diffusion ring: The ring around the sediment ring is called the diffusion ring, which is the trace left by fine particle impurities suspended in the oil diffusing outward. The finer the particles, the farther they diffuse. The width of the diffusion ring and the uniformity of its color are important factors, indicating the dispersing ability of oil additives against contaminants. 5. Oil ring: The outer ring beyond the diffusion ring is the oil ring, with colors ranging from light yellow to brownish-red, indicating the degree of oil oxidation.
5
2
Share

What brand of engine oil is used for the Haval H6?

Haval H6 originally uses semi-synthetic engine oil with SL grade and 10W-40 viscosity. Here are some introductions about the engine oil used in Haval H6: 1. Haval H6 can use any engine oil with the same specifications and parameters. Usually, about 4L of engine oil is added during an oil change, which is the amount of one barrel. It can lubricate and clean the engine. 2. All engine oils are formulated with base oils and additives. Full synthetic engine oil contains 100% non-traditional, high-performance fluids; while semi-synthetic engine oil (also known as "blended oil") has a smaller percentage of such high-performance fluids and contains traditional mineral oil.
6
0
Share

How many kilometers does a car need to be serviced?

Generally, a major service is required when a vehicle reaches 30,000 kilometers. Detailed information about car maintenance is as follows: 1. Depending on the situation, car maintenance may require replacing components such as the engine oil filter, air filter, fuel filter, power steering fluid, and spark plugs. 2. Currently, most car engines use a dry-type air filter with a paper filter element, which is lightweight, low-cost, easy to replace, and highly efficient. It is generally recommended to clean it every 5,000 kilometers. When cleaning, remove the filter element and gently tap the end face, then use compressed air to blow from the inside out to remove dust. Do not wash it with gasoline or water. 3. The air filter must be replaced every 25,000 kilometers. As for the oil filter, most car engines use a spin-on oil filter, which is a disposable, non-cleanable filter. When replacing the lubricating oil, the oil filter must also be replaced; otherwise, it may affect the quality of the lubricating oil. The replacement interval for engine oil and the oil filter is generally also 5,000 kilometers.
15
0
Share

Is the Gearbox of the Boyue Dry or Wet?

The gearbox of the Boyue is dry, meaning it is a dry-type gearbox. The differences between dry and wet clutches are as follows: 1. Their working principles are generally the same, with both having two sets of clutches working simultaneously—one managing odd-numbered gears and the other managing even-numbered gears. 2. The main difference between the two types of clutches lies in the connection medium between the driving disc and the driven disc. A dry dual-clutch transmits power through air, while a wet dual-clutch uses oil. 3. The characteristics of a dry clutch include lower cost and higher efficiency, but the drawbacks are that it is more complicated to operate and prone to damage. 4. The advantages of a wet clutch are simpler operation and lower failure rates, while the disadvantages are higher cost and lower efficiency compared to a dry clutch.
13
4
Share

Where is the car clutch located?

The car's clutch is located on the far left. Generally, a manual transmission car has three pedals, arranged from left to right as follows: the clutch pedal, the brake pedal, and the accelerator pedal. The left foot controls the clutch pedal, while the right foot controls the accelerator and brake. Here are the key points for operating the clutch: 1. To shift gears, you must press the clutch. Note that when pressing the clutch, you must press it all the way down; otherwise, it will accelerate clutch wear and, over time, make gear shifting difficult. 2. When not shifting gears, do not rest your foot on the clutch. This is because keeping your foot on the clutch for a long time may lead to accidentally pressing it due to fatigue or inertia, which can be dangerous. 3. Release the clutch gently and slowly. Many people stall the engine because they are not familiar with clutch control. Once you are familiar with it, you can also press the accelerator slightly while pressing the clutch. 4. When starting on a slope, find the semi-engagement point. Slowly release the clutch, and when the car starts to vibrate, it reaches the semi-engaged state. At this point, press the accelerator and slowly lift the clutch, and the car will move forward.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.