···
Log in / Register

How to set the horn sound when locking the VV5?

1Answers
SanEmmett
07/29/2025, 09:12:52 PM

To set the horn sound when locking the VV5, simultaneously press the unlock and lock buttons for 3 seconds. Here are the specific details about car horns: 1. The horn is the audio signal device of a car. During driving, the driver can emit necessary audio signals as needed and according to regulations to warn pedestrians and alert other vehicles, ensuring traffic safety. It is also used for urging and transmitting signals. 2. The working principle of an air horn is to use the airflow of compressed air to vibrate a metal diaphragm to produce sound. Therefore, it can only be used on vehicles equipped with an air compressor. Generally, air horns are installed on large buses and heavy-duty trucks, especially for long-distance transport vehicles driving in mountainous areas or curves. Using an air horn can effectively alert pedestrians and drivers of oncoming vehicles. Because air horns have a loud volume, pleasant sound, and can travel far. Air horns usually adopt a cylindrical shape and use a combination of high and low-pitched horns to work together.

Was this review help?
103
Share
More Q&A

Where is the fuel pump located?

The fuel pump is located inside the vehicle's fuel tank. It is electrically driven and consists of the pump body, permanent magnet motor, and housing. The function of the fuel pump is to increase fuel pressure, achieving atomization through high-pressure injection. The main purpose of the high-pressure fuel pump is to serve as the power source for hydraulic devices such as jacks, headers, extruders, and cotton gins. Symptoms of insufficient fuel pump pressure include: 1. Abnormal noise from the fuel pump under the rear seats while driving; 2. Weak acceleration, especially with noticeable hesitation during rapid acceleration; 3. Difficulty starting the vehicle or failure to start; 4. The engine warning light on the vehicle's instrument panel remains constantly illuminated.
112
Share

Can Automatic Headlights Switch Between High and Low Beams?

Automatic headlights can switch between high and low beams. Generally, automatic headlights default to low beams. If high beams are needed, the driver must manually adjust them. However, some higher-end vehicles also feature an automatic high/low beam switching function. Automatic headlights are a convenience feature installed by certain car manufacturers, equipping the front headlights with a light-sensing control system. When the light intensity exceeds or falls below a certain threshold, the headlights will automatically turn on or off. While driving, if the light dims, the headlights will automatically turn on, and they will turn off when the light brightens. The activation of automatic headlights has a delay—meaning the headlights will only turn on automatically within a few seconds after the light-sensing system detects dimming conditions. According to traffic regulations, headlights must be turned on before entering a tunnel. Therefore, when passing through a tunnel, it is still necessary to manually turn on the headlights in advance.
106
Share

What lights to use for night driving on highways?

When driving on highways at night, use high beams. This is because highway street lights are generally not densely distributed, making it difficult to see the road conditions clearly. Additionally, low beams only illuminate up to 30 meters ahead. Given the high speeds on highways, if there's an obstacle ahead, the driver would have insufficient time to react at such a short distance, increasing the risk of accidents. High beams provide a visibility range of about 100 meters, allowing more reaction time in case of sudden situations. However, keeping high beams on continuously is not advisable. If the distance to the vehicle ahead is less than 100 meters, it's recommended to switch to low beams. Highways often have many tunnels, and there's no need to use high beams when passing through them as tunnel lighting is usually very bright.
103
Share

How to Distinguish Between Intake and Exhaust Camshafts in an Engine?

Methods to distinguish between intake and exhaust camshafts in an engine: You can observe the position of the screws and the belt on the camshaft. The intake camshaft usually has a camshaft position sensor installed at the front or rear, is longer in length, and has a signal disc at the tail. If it's hard to distinguish, it's okay to make a mark when disassembling, as they can generally be identified. Even if they look the same externally, there are letters indicating their function: 'I' stands for intake, and 'E' stands for exhaust. The camshaft is installed at the top of the cylinder head and functions to drive the intake and exhaust valves to open and close. Both the intake and exhaust camshafts are equipped with a drive wheel, which is directly driven by a chain or belt to rotate the camshaft. Some engines use a chain drive to rotate the camshaft, aiming to reduce the valve angle.
117
Share

Is a Wheel Alignment Necessary When Changing Car Tires?

Car tire replacement does not require a wheel alignment. Changing tires only affects the overall dynamic balance of the wheels and has no impact on the suspension. The functions of tires are: 1. Transmitting driving force, braking force, and steering force to achieve vehicle operation; 2. Supporting vehicle loads; 3. Reducing and absorbing vibrations and impacts during driving to avoid severe vibrations damaging car components. Tire maintenance methods include: 1. Regularly removing stones stuck in tire treads; 2. Minimizing exposure to direct sunlight; 3. Promptly checking tire pressure; 4. Paying attention to suspension maintenance; 5. Periodically inspecting front wheel alignment; 6. Adopting careful driving habits by choosing smooth road surfaces, avoiding objects that could puncture or scratch tires, and steering clear of chemical spills that may corrode tires.
105
Share

Can Old License Plates Be Transferred to a New Car?

The old license plate cannot be used on a new car, but the old license number can be used on a new car. There is a difference between the two. If the car is sold, the license plate will be reclaimed by the vehicle management office, but the number will be retained for one year. If you purchase a new car within that year, you need to go to the vehicle management office to have a new plate made, but it will still use the old number. If you want to keep the old license plate, you can refer to the following regulations: 1. The vehicle must have been used for at least one year to retain the original license plate, and the retention period can be up to one year; 2. The original license plate can be retained if the vehicle is transferred, deregistered, or relocated; 3. Both used and new cars can apply for retention; 4. All traffic violation records of the original vehicle must be resolved.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.