How to set the horn sound when locking the Haval F7x?

2 Answers
MacCecilia
08/29/25 3:38am
The method to set the horn sound when locking the Haval F7x is: 1. Press and hold all four window lift buttons, wait until the windows are fully raised and continue holding for 5 seconds, then release and lock the car; 2. Alternatively, you can use a computer to access the car's hidden settings and check the corresponding option to activate the horn sound when locking. Taking the 2021 Haval F7x 1.5T two-wheel-drive Extreme Intelligence Trend Play Lite version as an example: it is a compact 5-door, 5-seat SUV crossover under the Great Wall Motors brand, with dimensions of 4620mm in length, 1846mm in width, and 1660mm in height, a wheelbase of 2725mm, equipped with a 7-speed dual-clutch transmission, and the engine's maximum torque is 285 N·m.
Was this review help?
13
5
Share
LaSophia
09/10/25 8:17am
When driving my Haval F7X, I often need to adjust settings to make it more comfortable. The setup for the lock beep is actually quite simple and usually done after starting the vehicle. I first press the menu button on the steering wheel or directly tap the settings icon on the central screen, then select the vehicle settings or sound menu, find the alarm system option, and click on the lock beep to turn it on or off. The whole process takes just a minute or two, no complex tools needed, and remember to do this while parked to avoid distractions while driving. I recommend turning it on because the beep when locking confirms the action was successful, which is especially useful in parking lots or on rainy days, saving you from having to double-check if the car is locked. If the system is slow to respond, just wait a bit longer or try restarting the vehicle. Overall, Haval has designed it very user-friendly, and this feature adds to daily convenience.
Was this review help?
11
0
Share
Expand All
More Forum Discussions

Within how many meters should gear shifting be completed?

Gear shifting, acceleration, and overtaking should be completed within 100 meters. Below is a detailed introduction about car gears: Speed range: First gear corresponds to a speed of 0-5 km/h. Second gear corresponds to 5-20 km/h, third gear to 20-40 km/h, fourth gear to 40-60 km/h, and fifth gear to 60-100 km/h. Gear shifting timing: For most cars, the ideal shifting point is when the engine reaches 2000 r/min, and should not exceed 2500 r/min. For high-displacement, high-power engines, shifting can be done at around 3000 r/min.
15
5
Share

How Many Chances Do You Have in the 50-to-1 Selection?

One. When a car owner chooses to select a license plate through the 50-to-1 method at the vehicle management office, after entering the acceptance voucher number and confirming, the computer starts timing. The license plate numbers rapidly scroll on the screen, and upon pressing the confirm button, the screen stops scrolling and displays 50 license plate numbers. The owner must select one within 120 seconds. Once the 50-to-1 selection is made, there is no second chance. Below is relevant information about license plates: License plate colors: Blue represents ordinary small vehicles, yellow represents ordinary large vehicles, black is used by foreign investors in China or important figures, and green represents new energy vehicles. License plate composition: The license plate consists of the province abbreviation + city letter code + 5-digit license plate number. The first character is a Chinese character representing the provincial administrative region where the vehicle is registered, and the second is an English letter representing the prefecture-level administrative region.
19
0
Share

What grade of gasoline should a 2.0T engine use?

2.0T engines are recommended to use 95-octane gasoline, which results in less carbon buildup. The 'T' stands for turbocharged engine models (TURL). A 2.0 engine simply refers to a naturally aspirated engine with a displacement of 2.0 liters. A 2.0T engine is equipped with a turbocharger, maintaining the 2.0-liter displacement but delivering power equivalent to or exceeding that of a 2.4-liter engine. While fuel consumption is higher due to increased power output, emissions are cleaner. Engine Displacement: Commonly referred to as displacement, it is the total volume swept by all the engine's cylinders, calculated as the product of single-cylinder displacement (Vh) and the number of cylinders (I). Cylinder displacement refers to the volume of gas swept by the piston from top dead center to bottom dead center, also known as single-cylinder displacement, which depends on the cylinder bore and piston stroke. Turbocharger: Essentially an air compressor, it increases air intake by compressing air. It utilizes the inertial force of exhaust gases expelled by the engine to drive a turbine in the turbocharger housing. This turbine, in turn, drives a coaxial impeller, which compresses air delivered through the air filter pipe, forcing it into the cylinders under pressure.
8
2
Share

Will the Pump Automatically Stop When the Tank is Full?

Nowadays, gas stations commonly use self-sealing nozzles that automatically shut off when the tank is full. Below are specific methods for selecting engine oil for your car: Performance selection: If you prioritize long-lasting oil, you can choose Mobil oil; if you focus on engine cleanliness, Shell lubricants can be used; for lubricants with strong oil film toughness, Castrol is recommended. Driving conditions: For frequent driving in congested areas, older vehicles, or long-distance heavy-load transportation, the viscosity of the lubricant can be appropriately increased. Engine type: For naturally aspirated engines, mineral oil or semi-synthetic oil can be used. Compared to naturally aspirated engines, turbocharged engines have a more compact structure and operate under harsher conditions, requiring higher-quality lubricants with better fluidity, preferably full synthetic oil.
11
4
Share

What Causes the Repeated Switching of Four Door Locks?

The reason for the repeated switching of door locks may be a malfunction in the control box. Here are the solutions for the repeated switching of door locks: Replace parts: Replace the central lock or control box. The central locking system in the car refers to the switch located on the driver's door, which can simultaneously control the closing and opening of all car doors. Set the master switch: The central door lock switch consists of a master switch and sub-switches. The master switch is installed on the door next to the driver and can lock or unlock all car doors. The door lock actuator is controlled by the door lock controller to perform the tasks of locking and unlocking the doors.
15
0
Share

Does Having Four Tires of Different Brands Have Any Impact?

Using four tires of different brands does have an impact. Below are the specific effects of having four tires from different brands installed: Deviation: Different tread patterns can cause variations in the contact area between the tire and the ground, leading to uneven tire wear and deviation over prolonged use. Safety Hazards: Tire structures vary significantly between manufacturers, and mixing tires can increase the risk of traffic accidents. Different tread patterns and brands can severely affect braking performance, wear, and high-speed performance. Noise: Incompatible tread materials can generate noise and, in severe cases, damage the wheel bearings.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.