How to set the horn sound when locking an Audi A4?

What is the inspection cycle for private cars?

Private cars registered after September 2012 that meet the requirements can enjoy the exemption policy and only need to be inspected once a year. For cars aged between 6 to 15 years, an annual on-site inspection is required. For cars over 15 years old, inspections are required every six months. Below is an extended introduction: Passenger vehicles for operation: Passenger vehicles for operation need to be inspected once a year within the first 5 years and every 6 months thereafter. Trucks: Trucks and large or medium-sized non-operational passenger vehicles require an annual inspection within the first 10 years and every 6 months thereafter. Motorcycles: Motorcycles require an inspection every 2 years within the first 4 years and annually thereafter.

4

3

Share

Where is the manufacturer's nameplate located?

It is generally located at the lower part of the passenger side door or in the fuse box of the engine compartment. You can see it by opening the door or lifting the hood. Below is detailed information about it: 1. Detail one: It clearly indicates the manufacturing date of the vehicle, with most showing the year and month, and a few even specifying the day, making it very straightforward. 2. Detail two: The VIN code of the vehicle is usually located at the lower left corner of the front windshield. It serves as the vehicle's ID card, containing information such as the manufacturer, year, model, body type and code, engine code, and assembly location.

8

3

Share

Can China Not Produce Automotive Chips?

There are many types of automotive chips, and many of them are produced in China, but high-frequency chips cannot be manufactured in China. The relevant introduction to automotive chips is as follows: Introduction 1: Automotive chips are semiconductor component products, also known as integrated circuits, and are a very important part of motor vehicles. Without chips, motor vehicles cannot be used or operated. Automotive chips are installed in the vehicle's onboard computer and control all electrical components and related sensors of the motor vehicle. Introduction 2: If there is a problem with the vehicle's chip, it needs to be repaired at an after-sales service center. It cannot be solved by oneself and must be diagnosed using professional computer equipment, then repaired and installed by professional personnel. Otherwise, it is easy to cause more problems.

8

0

Share

How to Use BMW's Electronic Parking Brake?

BMW's electronic parking brake can be used as follows: 1. Activate BMW's electronic parking brake. Specific method: Pull up the electronic parking brake switch, and the indicator light will turn red to indicate activation. 2. Release BMW's electronic parking brake. Specific method: When the ignition is on, press the brake pedal or shift into P gear, then press the electronic parking brake switch, and the indicator light will turn off, indicating the parking brake is released. 3. Emergency braking function of BMW's electronic parking brake. This function enables emergency braking while driving, reducing the time needed to decelerate. Specific method: Pull and hold the electronic parking brake switch for more than 2 seconds.

10

4

Share

How to Fix a Car Door Handle That Doesn't Retract?

There are several reasons why a car door handle may not retract. Here are the specific causes and solutions: 1. Foreign object stuck: Simply remove the foreign object. 2. Rusty spring affecting retraction: Water entering the door handle causes the spring to rust, affecting its retraction. Dry it with clean paper towels and remove the rust. 3. Broken or damaged spring: Replace with a new spring. Additional information: 1. Different car designs may have different types of door handles. 2. Solid handles are characterized by their thickness and were early products. Hollowed-out handles feature a hollow back design, improving resistance to deformation and bending. Hollow handles can overcome deformation and shrinkage issues while also enhancing the strength and safety of the handle.

18

0

Share

What Causes the Anti-Skid Light to Illuminate After Vehicle Startup?

Possible reasons for the anti-skid light illuminating after vehicle startup include: 1. ABS pump failure. 2. Accidentally pressing the ESP off button. 3. Loose or faulty sensor connectors. 4. Short circuit or related fuse blown. 5. Software issues causing poor signal transmission. Below are methods to reset the anti-skid light: 1. Restart the engine and briefly press the ESP OFF button on the vehicle to check if the ESP was accidentally turned off. 2. Visit a professional repair facility for inspection, use a specialized fault diagnostic tool to identify the issue, and after repair, use a decoder to clear the fault codes to ensure the ESP operates normally, after which the warning light will turn off.

14

3

Share

How to set the horn sound when locking an Audi A4?

What is the inspection cycle for private cars?

Where is the manufacturer's nameplate located?

Can China Not Produce Automotive Chips?

How to Use BMW's Electronic Parking Brake?

How to Fix a Car Door Handle That Doesn't Retract?

What Causes the Anti-Skid Light to Illuminate After Vehicle Startup?

Does the Audi A8 require lift mode for tire replacement?

Can the Haval Big Dog wheel rims be customized?

Does the Audi A6 have wireless phone charging?

What are the similarities and differences between new energy vehicles and traditional vehicles?