How to Set the Headlights on the Buick Excelle?

1 Answers
DiJeremiah
07/29/25 4:26pm
The method to set the headlights on the Buick Excelle is: 1. Adjust the high beam using the lever on the left side of the steering wheel; 2. The vehicle will automatically turn on the low beam when the light is dim. The Buick Excelle is a compact car with body dimensions of 4609 mm in length, 1798 mm in width, and 1486 mm in height, with a wheelbase of 2640 mm and a fuel tank capacity of 44 liters. The Buick Excelle is equipped with a 1.3T turbocharged engine, delivering a maximum power of 120 kW at 5500 rpm and a maximum torque of 230 Nm between 1800 to 4400 rpm.
Was this review help?
2
0
Share
More Forum Discussions

Where is the cabin air filter located in the Audi A4L?

The Audi A4L is equipped with cabin air filters at both the air intake vent and the blower motor, unlike some models that only have a filter at the blower motor. This dual-filter setup provides better filtration of airborne particles such as dust and pollen. Below are the steps to replace the cabin air filters in the Audi A4L: 1. Replacing the air intake vent filter: The air intake filter is located at the bottom left of the engine compartment's cover panel. First, remove the foam piece on the far left, then lift the sealing strip to open the cover panel and access the filter. The filter is housed in a rectangular frame - release the frame's securing clips to remove the entire assembly. Install the new filter and clean the air intake duct before reassembling in reverse order. 2. Replacing the blower motor filter: The blower motor filter is located above the front passenger footwell, concealed behind a trim panel secured by plastic screws that can be unscrewed by hand. After removing the panel, you'll see a rectangular cover - press the clip on the right side of the cover to remove it. Pull out the old filter and install the new one, then reassemble following the reverse procedure.
13
2
Share

What does the wrench symbol on the gear display of Volkswagen CC mean?

When a small wrench appears on the gear display of a Volkswagen CC, it serves as a reminder for the driver that the vehicle requires maintenance. This icon needs to be manually reset after each maintenance service. If forgotten, the symbol will continue to display even after maintenance has been performed. Below is more information about vehicle maintenance: 1. Routine maintenance refers to daily upkeep tasks performed before driving, during driving, and after parking. These tasks, which include cleaning, replenishment, and safety inspections, are the responsibility of the driver and are essential for maintaining the vehicle's normal working condition. 2. Primary maintenance is carried out by professional repair shops. In addition to routine maintenance tasks, the focus is on cleaning, lubrication, and tightening, along with inspections of safety components such as brakes and controls. Secondary maintenance, also performed by professional repair shops, goes beyond primary maintenance to include inspections, adjustments, tire removal and inspection, and tire rotation. Before secondary maintenance, diagnostic tests and technical evaluations should be conducted to determine any additional repair or minor service needs, which are then addressed during the secondary maintenance. 3. The frequency of each maintenance level depends on the vehicle type and operating conditions.
12
3
Share

Which country is MG from?

MG is a car manufactured in China. Here is some relevant information about MG: 1. MG focuses on the respiratory health of users inside the vehicle. From sedans to SUVs, from internet-connected cars to new energy vehicles, multiple models are equipped with high-efficiency PM2.5 air conditioning filters. The filter material consists of a spun-bond pre-filter layer and a melt-blown microfiber layer, further processed with electrostatic charging technology. It not only provides mechanical filtration but also captures bacteria and dust particles effectively. Experimental verification shows that the filter achieves over 95% efficiency in filtering particles ranging from 0.5um to 5um (such as droplet nuclei, the primary transmission mode of coronaviruses), offering comprehensive protection for passengers, especially children, the elderly, and pregnant women. 2. MG has contributed numerous classics to the global automotive industry. The creation of 43 world speed records, multiple industry firsts, and the application of cutting-edge technologies not only reflect its century-old racing heritage but also drive the development of the global automotive industry.
12
2
Share

When will the new BMW X5 be domestically produced?

BMW new X5 was domestically produced in 2022. Below are the details about the new BMW X5: 1. As a flagship product, the all-new X5 adopts a brand-new design language, featuring the most eye-catching "thickened and widened" "kidney grille" at the front, paired with LED headlights on both sides, Y-shaped daytime running lights, and large-sized wheels, presenting a more youthful and sporty overall visual effect. In terms of body dimensions, all aspects have been improved compared to the previous generation. Taking the wheelbase as an example, the new X5 has increased by 42 mm, reaching 2975 mm. 2. The interior of the new car also features a completely new design, including a combination of instrument panel and control display (both 12.3 inches), equipped with the latest BMW iDrive 7.0 human-machine interaction system, which adopts the most advanced all-digital design. Additionally, the new car is equipped with a panoramic sunroof with starry sky effect, intelligent ambient lighting, welcome light carpet, Bowers & Wilkins 3D Diamond Surround Sound System, and a professional-grade rear-seat entertainment system with a 10.2-inch touchscreen display, among others. In terms of powertrain, the version introduced to the Chinese market in the future will be equipped with an inline 6-cylinder gasoline engine, delivering a maximum power of 250 kW and a maximum torque of 450 N·m. Paired with the new 8-speed Steptronic automatic transmission, it can accelerate from 0 to 100 km/h in just 5.5 seconds.
15
4
Share

Why doesn't the steering wheel automatically return to center?

The main reason for the steering wheel not automatically returning to center is damage to the external steering gear. When a car turns, the steering wheel is designed to automatically return to center to enhance vehicle handling and driving stability, with the key factors being caster angle and kingpin inclination. Additional information: 1. For tires, turning the steering wheel while stationary causes the wheels not to roll. Especially for the front wheels, which bear the weight of the vehicle while also turning, this increases wear on the tire surface and reduces the tire's lifespan. Uneven tire wear and force distribution lead to varying degrees of damage on the tire tread, increasing driving hazards. 2. Prolonged stationary steering puts significant stress on the steering system itself. Repeated stationary steering keeps the system under high operational stress, requiring substantial power assistance. This can cause excessive play in the linkage system, leading to premature aging of the steering wheel, reduced operational sensitivity, slower response times, and other safety hazards.
4
1
Share

What Causes the Prado Key to Not Turn?

The Prado key won't turn because the steering wheel is locked. To resolve this issue and turn the key again, you must simultaneously wiggle the steering wheel while turning the key forward. Here is an introduction to the Prado: 1. The Prado is the latest model in Toyota's Land Cruiser series, featuring excellent power performance and meeting Euro III emission standards. 2. Its advanced engine delivers strong output power and torque, paired with a highly robust frame and reinforced suspension system, making even rugged journeys comfortable and smooth. 3. As a standard feature representing the Prado's spirit, the new model retains the front wide anti-scratch strip design, which is highly practical for off-road adventures. Unlike the bold front style, the Prado's hood appears relatively plain, with no prominent bulges or decorative tangent lines—just a flat surface with straight tangent lines on both sides, giving it a somewhat ordinary look. 4. With a 220mm ground clearance, the Prado offers good off-road capability. Its approach and departure angles, both at 27 degrees, are moderate for this class. The non-load-bearing frame adopts an advanced front double-wishbone independent suspension and rear four-link suspension structure, enhancing the vehicle's torsional and bending rigidity. 5. The new model also comes standard with large 265/65R17 tires, combined with Toyota's advanced four-wheel-drive system and central differential lock, balancing off-road capability with urban driving comfort.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.