How to Set the Cruise Control on Volkswagen CC?

1 Answers
BeckettLynn
07/29/25 11:22am
Volkswagen CC cruise control setting method: When the vehicle speed reaches above 40 km/h, turn on the cruise switch, then press the deceleration button to activate the cruise function; pressing the brake will automatically deactivate the cruise control. Below is more information about using the Volkswagen CC cruise control: 1. The Volkswagen CC cruise control system only works when the vehicle speed is above 40 km/h. 2. After activating the cruise control system, when the car reaches the desired speed, press the "SET" button to maintain this speed continuously. After setting the cruise speed, you can still accelerate using the accelerator pedal as usual. Upon releasing the accelerator pedal, the system will restore the speed to the set cruise speed. However, if the speed exceeds the cruise speed by more than 10 km/h and maintains this speed for over 5 minutes, you must reset the cruise speed. 3. To safely turn off the cruise control system, slide the switch to the "OFF" position, or turn off the ignition when the car is stationary. This will clear the stored values and completely shut down the system. To restart the cruise system, ensure the speed is above 30 km/h, place the cruise switch to the "ON" position, and reset the cruise speed.
Was this review help?
13
4
Share
More Forum Discussions

What are the dimensions of the new Civic in terms of length, width, and height?

The new Civic measures 4649mm in length, 1800mm in width, and 1416mm in height, with a wheelbase of 2700mm. Compared to the Mazda3 Axela, both cars share the same wheelbase, but the Civic is larger in length and width, while the Axela has an advantage in height. New Civic colors: The new Civic offers a total of seven body colors for consumers to choose from: Crystal Black, Rallye Red, Lunar Silver, Dark Blue, Amber Orange, Sonic Blue, and Pearl White. The color selection is rich, with a focus on sporty styles. The Rallye Red and Sonic Blue are particularly striking, while the Black and White are very timeless, and the Silver is very elegant. New Civic configurations: Honda Civic (CIVIC) has introduced multiple models to cater to the tastes of consumers in different countries, including three-door hatchbacks, hardtop coupes, hybrid versions, and five-door sedans. The 1.0T turbocharged engine has a rated power of 92kW (125PS) and a peak torque of 173Nm, paired with a 6-speed manual transmission and a CVT transmission.
18
1
Share

What are the models of Mercedes-Benz new energy vehicles?

Mercedes-Benz new energy vehicles include the S-Class plug-in hybrid, GLE-Class plug-in hybrid, and GLC350E plug-in hybrid, among others. The relevant introduction to Mercedes-Benz new energy vehicles is as follows: Introduction to the Mercedes-Benz GLE: It features Mercedes-Benz's latest family-style front face design. The air intake grille adopts a dual-horizontal slat design paired with a large-sized logo, and the rear of the Mercedes-Benz GLE features a dual-exhaust pipe design. The Mercedes-Benz GLE continues the family-style design, with a continuous center console, dark color scheme, and accents of metal and leather. Introduction to the Mercedes-Benz GLC350E: The Mercedes-Benz GLC350e is positioned as a mid-size SUV. As the plug-in hybrid version of the GLC, its powertrain consists of a 2.0T engine and an electric motor. Additionally, the new vehicle adopts Mercedes-Benz's latest exterior and interior design language and comes equipped with the latest safety assistance systems. In terms of power, the Mercedes-Benz GLC350e is equipped with a hybrid system composed of a 2.0T engine and an electric motor, with a combined maximum power output of 235kW (320PS), paired with a 7-speed automatic transmission.
20
4
Share

Does stalling during the motorcycle break-in period damage the engine?

Stalling during the motorcycle break-in period definitely causes some damage, but it shouldn't happen frequently. For beginners starting off: Hold the clutch, engage first gear; Gradually release the clutch while increasing the throttle slightly; Once the bike starts moving, stop releasing the clutch further. After the bike has moved about 1 meter, continue releasing the clutch or listen to the engine sound. When the engine sound normalizes and no longer sounds strained, fully release the remaining clutch. If the speed hasn't built up yet - when you've already started moving at half-clutch but the speed isn't sufficient - if you release the clutch completely in one smooth motion past the half-clutch point, the engine will stall. When at half-clutch, stabilize the clutch lever - don't release it further, just hold it steady. The motorcycle will naturally move forward. First twist the throttle to increase engine RPM, then release the clutch to the half-clutch point and stabilize it - this ensures smooth starting without stalling. Releasing the clutch isn't a linear process; you don't have to release it in one continuous motion at any speed. Remember: stabilize. The clutch operation is an intermittent process, not a linear one.
3
2
Share

Can You Drive a Semi-Trailer During the A2 Probationary Period?

A2 driver's license holders cannot drive trailers during the probationary period. According to Article 75 of the 'Regulations on the Application and Use of Motor Vehicle Driving Licenses': During the probationary period, motor vehicle drivers are not allowed to drive buses, passenger vehicles for operation, police cars, fire trucks, ambulances, engineering rescue vehicles, or vehicles carrying explosives, flammable and explosive chemicals, highly toxic or radioactive materials, and other hazardous substances; the motor vehicle driven shall not tow a trailer. Below is relevant information about driving during the probationary period: 1. When driving on highways during the probationary period, the driver must be accompanied by someone who has held a driver's license for the corresponding or higher vehicle class for more than three years. 2. Driving a small automatic transmission passenger vehicle specially designed for the disabled may be accompanied by a driver who holds a license for small automatic transmission passenger vehicles or higher. 3. During the probationary period after adding a new vehicle class to the license, driving a motor vehicle of the original licensed class is not subject to the above restrictions.
15
3
Share

What are the switches on the steering wheel for?

1. Models without automatic headlight adjustment feature a manual adjustment knob. After turning on the low beams, pushing the turn signal lever forward switches to high beams, while pulling it back flashes the high beams once (commonly known as "flashing lights"), a technique many drivers use during encounters with oncoming vehicles. 2. The turn signal operates with a downward movement for left turns and upward for right turns. The button on the left controls the trip computer, allowing selection of displays such as fuel consumption or remaining range. Some premium models feature a lane assist system on the turn signal lever, which monitors the road ahead and alerts the driver through steering wheel vibrations when the vehicle deviates from its lane. 3. Multifunction buttons on the steering wheel typically facilitate driver operations like volume adjustment and menu selection. Models equipped with car phones may also place call answer/end and microphone buttons on the steering wheel. 4. The right side of the steering wheel houses wiper controls. Adjustment involves pushing the lever up/down according to the icons, with speed adjustable based on rainfall intensity. Pulling the lever toward the driver activates windshield washer fluid. Models with rear wipers can also be adjusted here using identical controls.
8
5
Share

What are the causes of squeaking noise when a Prado turns?

There are three main causes of squeaking noise when a Prado turns. Wear and failure of the outer CV joint of the drive shaft: The outer CV joint of a car's drive shaft can wear out and fail after prolonged use. If issues arise with it, this can easily cause a clicking sound when the vehicle turns. The outer CV joint mainly consists of an inner and outer joint. When problems occur with the outer CV joint of the drive shaft, leading to a clicking sound during turns, it should be promptly repaired or replaced. Over-turning the steering wheel: The steering wheel is one of the most important components of a car. When turning the steering wheel, the force applied should be adjusted according to the size of the curve. Always turning the steering wheel too sharply can cause a clicking sound when the vehicle turns. Some drivers often turn the steering wheel all the way, regardless of the curve's size, which can easily lead to a clicking sound during turns. Clutch issues: The clutch is extremely important for a car as it determines the vehicle's basic driving speed. Clutch failure can also cause a clicking sound when the vehicle turns. Since the clutch is crucial, it is essential to use high-quality clutch products. If it is determined that the clicking sound during turns is due to clutch failure, the clutch can be replaced at a repair shop.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.