···
Log in / Register

How to Set the Cruise Control on the Equinox?

5 Answers
StIris
07/28/2025, 02:31 PM

The method to set the cruise control on the Equinox is: 1. Locate the switch on the left side of the steering wheel, press the switch when the speed is above 40 km/h, and the system will start working; 2. Push up to accelerate and push down to decelerate. After applying the brakes and releasing them, the speed will return to the set value. Taking the 2021 Equinox as an example, it is a mid-size SUV with body dimensions of 4646mm in length, 1843mm in width, and 1684mm in height, a wheelbase of 2725mm, a fuel tank capacity of 56 liters, and a curb weight of 1535kg. The 2021 Equinox is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169 PS, a maximum torque of 250 Nm, and a maximum power of 124 kW, paired with a 6-speed automatic transmission.

Was this review help?
9
5
Share
LylaAnn
08/11/2025, 06:28 PM

Every time I set the cruise control on my Equinox, I find it super convenient. First, start the car and drive at a suitable speed—generally at least 40 km/h or more on the highway, but don’t try it in the city. Then, press the CRUISE button on the steering wheel, and when the indicator light turns on, it means the system is activated. Continue accelerating to your desired cruising speed, say 80 km/h, then quickly tap the SET button to lock the speed. Later, you can use RES to resume or CANCEL to deactivate it, and you can also adjust the speed slightly with the +/- buttons. I often use this feature on long trips to save effort and fuel, but remember not to relax when there’s traffic—always keep an eye on the brakes. The Equinox’s design is very user-friendly, and the button placement is easy to find, usually on the right side of the steering wheel. Give it a try, and you’ll find driving much more relaxed.

Was this review help?
14
4
Share
Expand All
VanSophie
09/29/2025, 11:54 PM

As a newbie who just bought an Equinox, I figured out the cruise control, and it's pretty simple. First, drive the car to a smooth section of road and stabilize the speed above 30 km/h, otherwise the system might not activate. Then press the CRUISE button on the steering wheel—the light turns on to indicate activation. Next, accelerate to your desired speed, say around 60 km/h on the highway, and press the SET button to lock it in. Normally, use the +/- buttons to adjust speed or CANCEL to interrupt, and RES makes it easy to resume. The first time I used it, I was worried about making mistakes, but the manual says it’s no big deal. I suggest you also try practicing in an open area first, not during peak hours. This way, driving becomes less tiring, especially in traffic jams where you can avoid tapping the accelerator. The Equinox responds quickly, but new drivers need some time to adapt to the steering feedback.

Was this review help?
4
0
Share
Expand All
LaLucia
11/13/2025, 12:46 AM

Using cruise control requires a focus on safety. In the Equinox, I first ensure the road conditions are clear and the speed exceeds 40 km/h before pressing the CRUISE button to activate the system. Then, I accelerate to the desired speed and tap SET to lock it in. For daily use, RES resumes the set speed, CANCEL deactivates it, or use the +/- buttons for fine adjustments. The key point is to always pay attention to the surroundings and intervene by braking if any situation arises—don’t rely on it entirely. It’s a great way to reduce fatigue on highways, but avoid using it in rain, snow, or areas with many turns to prevent loss of control. The Equinox’s design is fairly reliable, with buttons conveniently placed on the steering wheel to minimize distractions and accidental presses. Remember to maintain and inspect the system regularly to prevent potential hazards from aging or malfunction.

Was this review help?
7
5
Share
Expand All
Furtado
01/03/2026, 02:28 AM

Using the Equinox's cruise control for commuting is super practical. When driving at a steady speed, such as around 60 km/h on the highway, press the CRUISE button on the steering wheel to activate the indicator light, then tap the SET button to lock the speed. After that, use the +/- buttons to adjust or press CANCEL to exit, and RES to resume the previous setting. Setting it on the highway daily allows your foot to relax and reduces fatigue. The Equinox responds quickly, and the buttons are conveniently located on the right side, but remember not to activate it in heavy traffic to avoid accidents. Long-term use can also save some fuel, making it especially suitable for long trips. I recommend familiarizing yourself with the manual's location before trying it out, in case the button icons are unclear.

Was this review help?
7
1
Share
Expand All
More Forum Discussions

What to Do If a Beginner Doesn't Know How to Park?

When parking, beginners should choose to reverse into the parking space. When there is only one parking space available, they should drive past the current parking space. Stop when the rear of their car is aligned with the rear of the car in front, maintaining a distance of 1 meter between the two cars. Then, turn the steering wheel fully to the right while stationary, forming a 45-degree angle, and slowly reverse. When the front of their car and the rear of the car in front are in a straight line, turn the steering wheel fully in the opposite direction, then slowly reverse again to park the car properly.
8
3
Share

Should the Sagitar 1.4T use 92 or 95 octane gasoline?

According to the official vehicle manual recommendation, the Sagitar 1.4T should use 95 octane gasoline. In addition to checking the suitable gasoline grade in the vehicle manual for the Sagitar 1.4T, you can also find it on the fuel tank cap, which will also indicate the recommended grade. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of some new technologies, the gasoline grade cannot be solely determined by the compression ratio. A high compression ratio can also be adjusted to use lower octane gasoline because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane number, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Sagitar 1.4T occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane value will alter the fuel's ignition point, leading to delayed combustion in the engine. This means the engine's power output and thermal efficiency will decrease, resulting in poorer performance. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Due to the significantly lower octane value, the gasoline's ignition point decreases, causing premature ignition during the compression stroke. If combustion occurs before the spark plug ignites, resistance will arise during the upward stroke. This resistance can make the engine run very unstably. If the knocking is imperceptible, it may only increase noise without significant damage to the engine. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.
4
0
Share

How to Reset the Volkswagen Oil Level Warning Light?

Ensure the vehicle is in the ignition-off state, with the key turned to the steering wheel lock position. Press and hold the right button on the instrument panel ("0.0/SET") with your left hand, and do not release it. While keeping the right button pressed with your left hand, use your right hand to turn the key to illuminate the instrument panel. Release the left hand and press the left button on the instrument panel once. At this point, the wrench symbol will disappear, indicating a successful reset of the maintenance light.
5
4
Share

What are the penalties for a vehicle being overdue for inspection for six months?

If a vehicle's inspection is overdue for less than three months, you can simply go through the renewal process, and you will receive a verbal warning without any fine. If a vehicle's inspection is overdue for more than three months but less than two years, you will need to pay a fine and have 3 points deducted from your driving license. If a vehicle has not undergone an annual inspection for more than two years, its registration file will be canceled, and the process to restore the file is relatively complicated. Generally, a fine must be paid before the file can be restored. The vehicle owner or the unit responsible for the vehicle must fill out the "Motor Vehicle Annual Inspection Form" and submit it to the designated location for inspection by the date specified by the local vehicle management office.
2
1
Share

How to Reset the Tire Pressure Monitoring on the Teana?

Teana tire pressure monitoring reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete. The tire pressure monitoring indicator is a yellow symbol, an irregular circle with no seal on top and four small spikes at the bottom, containing an exclamation mark inside. The illumination of the tire pressure monitoring indicator indicates abnormal tire pressure. Abnormal tire pressure is generally caused by one of the following three reasons: Abnormal tire pressure: Usually, an alarm will be triggered if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which is used to monitor tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the tire pressure sensor is damaged due to impact while driving, it will also cause the tire pressure warning light to illuminate. For sensor damage issues, the only solution is to replace it with a new component.
17
2
Share

What is the method for sealing the transmission?

Apply sealant to the leakage point, which involves cleaning the surface sludge before applying the sealant. This method does not require disassembling the transmission structure. It is not ruled out that some transmissions may experience leakage issues. If traces of fluid flow are observed on the oil-stained surface, the vehicle owner should promptly visit a service center for inspection. If the mating surface of the transmission housing is damaged, an appropriately thickened paper gasket should be added at the damaged area. If the sealing paper gasket is damaged, it should be replaced with an identical one. Loose screws should be tightened in a timely manner.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.