How to Set the Cruise Control on CRV?

[LaZachary]

To set the cruise control on a CRV, follow these steps: 1. Ensure the vehicle speed is above 40 km/h, then press the ON button located on the left side of the steering wheel to activate the cruise control. 2. Use the RES and SET buttons to fine-tune the speed, allowing for acceleration or deceleration. 3. To deactivate the cruise control, either press the brake pedal or use the OFF button on the left side of the steering wheel. Taking the 2017 CRV as an example, it features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 146 PS, a maximum power of 107 kW, and a maximum torque of 175 Nm, paired with an electronic continuously variable transmission (CVT).

[StTalia]

Setting the cruise control on the Honda CR-V is quite simple, so let me share my driving experience. First, start the car and get moving—the system only works when your speed is above 40 km/h; it won’t activate if you’re going too slow. On the right side of the steering wheel, there’s a cruise control button, usually marked with a dashboard icon. Press it once to activate the system, and a small light will appear on the dashboard. Then, continue accelerating to your desired speed, say 60 or 80 km/h, and press the SET button to lock in that speed. Adjusting the speed with the +/- buttons is also convenient—each press increases or decreases the speed by 1 km/h. To cancel, lightly tap the brake or press the CANCEL button. I find it very handy on highways, but remember not to use it in rainy weather or heavy traffic to avoid skidding or delayed reactions—safety first! Cruise control is best for straight roads, so avoid using it on winding routes. Also, take breaks during long drives.

[LeChristian]

When I first started driving the CR-V, it took some figuring out to set the cruise control. First, get your car up to at least 30 km/h—city roads are usually sufficient. There’s a button on the steering wheel with the word CRUISE; press it to activate the system. Then, accelerate to your desired speed and press SET to confirm—your speed locks instantly, so you don’t need to keep pressing the gas pedal. Adjust your speed using the +/- buttons nearby, with each tap changing it by about 1-2 km/h. Hitting the brakes or pressing the cancel button will deactivate it immediately. My driving instructor advised practicing in open areas first to get familiar with the controls, avoiding high speeds until comfortable. Now, I use it often for daily commutes—it helps reduce foot fatigue on highways, but you still need to stay alert and avoid distractions. Remember, cruise control is just an assist; you’ll need to handle steering and overtaking manually.

[Rylee]

The cruise control on the CR-V operates via electronic module signals. You accelerate to over 40 km/h, press the CRUISE button to activate the ECU system, and the light turns on indicating readiness. Then the SET button sends a signal for the controller to memorize the speed value, automatically adjusting fuel intake to maintain a constant speed. The +/- buttons send pulses to modify the target speed range. Cancellation commands disconnect via the brake sensor, resetting the system. Prerequisites for use include flat, straight roads, and a fast, delay-free controller response. I prioritize system maintenance, regularly checking the steering wheel buttons for responsive contact to avoid malfunction risks. When setting the speed, do not exceed the speed limit; operate within a safe range. The electronic system is reliable, but don’t over-rely on it.