How to Set the BMW X1 Rearview Mirror Tilt-Down Function When Reversing
4 Answers
To set the BMW X1 rearview mirror tilt-down function when reversing, follow these steps: 1. Start the engine and ensure the mirror adjustment switch is on the left side. You must have the correct seat memory settings (including mirror angles). 2. Adjust the seat memory to set the mirror to the memorized position. 3. Move the mirror adjustment button to the right. 4. Shift the gear lever to the "R" position. 5. Use the mirror adjustment button to tilt the mirror to the desired downward position. 6. After adjustment, shift the gear lever back to "N" or "P". 7. Shift into "R" again to test; the right mirror should tilt down to the previously adjusted position. 8. Shift back to other gears, and the right mirror should correctly return to the memorized position. 9. Once completed, you can turn off the engine.
I've been driving the BMW X1 for a while, and the auto-dipping mirror feature when reversing is super practical, especially for seeing curbs clearly during city parking. The setup isn't difficult: First park the car safely, ensure it's in P gear, then press the button near the steering wheel to enter the iDrive menu. In the main interface, locate the vehicle settings option, select it, then choose the mirrors section. There's a reversing assist toggle—enable it. Next, shift into reverse (R gear), manually adjust the right mirror to your desired dipping angle (e.g., to see the wheel position), and the system will automatically memorize it. Once saved, it activates automatically every time you reverse. This design saves time and prevents scrapes. I recommend periodically checking if the feature works properly—if issues arise, try restarting the car or resetting the settings. The BMW owner's manual also has detailed instructions; a few practice runs will make it second nature.
As a car enthusiast who loves exploring vehicle features, I can provide a detailed explanation of the BMW X1's automatic mirror tilt function for reversing. The key lies in operating the iDrive system: After starting the vehicle and ensuring it's in Park (P), use the central control knob to access the main menu. Select Vehicle Settings and enter the mirror menu, then locate and enable the automatic mirror tilt option for reversing. Subsequently, shift into Reverse (R) gear and manually adjust the right mirror angle to save it as a memory position. This entire process relies on BMW's intelligent memory system, and once completed, the mirror will automatically tilt downward during reversing. This feature not only enhances safety by improving rear visibility but also eliminates the hassle of frequent manual adjustments. There might be slight interface variations across different model years, but the overall process remains similar. If you notice insufficient sensitivity during use, first confirm there's no obstruction to the sensors. If necessary, visiting a BMW dealership for calibration would be the most reliable solution.
If you're a new BMW X1 owner, don't worry - setting up the automatic mirror tilt for reverse is quite simple. Let me guide you step by step: Park and shift to P gear, then access the settings menu through the central display. Select the mirror settings under vehicle configuration and enable the automatic tilt function for reverse gear. Next, shift to reverse gear and manually adjust the right mirror to your preferred angle - the system will memorize this position. Now the mirror will automatically tilt downward when reversing, helping you see blind spots behind the vehicle. This safe and convenient feature takes just a minute or two to set up. New drivers may want to practice a few times to get comfortable with it.
