How to set the automatic locking for Wuling Hongguang S?

1 Answers
Ruiz
07/29/25 7:49pm
To set the automatic locking for Wuling Hongguang S: First, turn on the ignition to power up (do not start the engine), then press and hold the lock button for about 10 seconds until you hear a beep inside the car or see the hazard lights flash twice. At this point, turn off the power and then start the engine to complete the setup. The automatic locking while driving is also known as speed-sensing automatic locking. The Wuling Hongguang S is a model developed by SAIC-GM-Wuling based on the Wuling Hongguang series, positioned between commercial vehicles and passenger cars. Its body dimensions are 4400mm in length, 1680mm in width, and 1770mm in height, with a wheelbase of 2720mm.
Was this review help?
1
4
Share
More Forum Discussions

Why can't the seat of the Mercedes-Benz C-Class be adjusted suddenly?

The sudden inability to adjust the seat of the Mercedes-Benz C-Class may be due to issues with the switch, front and rear motors, or wiring connectors. A specific diagnosis at a repair shop is required to identify the fault. Below are some relevant details about the Mercedes-Benz C-Class: 1. Exterior: The design is borrowed from the S-Class, with two versions available. The large emblem version focuses on youth, sportiness, and fashion, while the upright emblem version emphasizes maturity, stability, and elegance. 2. Space: The vehicle offers ample space, with the domestic model featuring an extended wheelbase, providing very spacious seating. The seats are soft and comparable to the previous generation E-Class. 3. Interior: The interior is beautifully designed with a strong sense of style, also borrowed from the S-Class, creating a very luxurious feel.
2
4
Share

What Causes the Jerking When Releasing the Accelerator Pedal?

The reasons for jerking when releasing the accelerator pedal are: 1. Excessive carbon buildup in the throttle body, fuel injectors, and intake passages; 2. Poor fuel quality leading to incomplete combustion; 3. Faulty spark plugs or ignition coils causing cylinder misfire; 4. Mismatch between engine torque and transmission oil pressure. Solutions for jerking when releasing the accelerator pedal include: 1. Cleaning carbon deposits from the throttle body, fuel injectors, and intake passages; 2. Replacing with qualified fuel; 3. Replacing spark plugs and ignition coils; 4. Changing transmission fluid. The function of the accelerator pedal is: By controlling the pedal pressure, it regulates the throttle opening, controls air intake, while the computer manages fuel quantity, thereby controlling engine speed.
14
4
Share

Why Does the Alarm Still Sound After Topping Up the Coolant?

Coolant The alarm still sounding after topping up the coolant is due to a malfunctioning coolant level sensor or poor wiring connections. Here is a detailed introduction to the function of the coolant temperature sensor: 1. Detecting Water Temperature: When the vehicle experiences issues such as excessive load, lack of water, incorrect ignition timing, non-rotating fan, or when prolonged exposure to the sun in summer causes the coolant temperature to rise, leading to an increase in engine temperature, the driver can be alerted through this sensor. 2. Preventing Malfunctions: The coolant temperature gauge in the instrument panel is designed to monitor the engine coolant temperature and display it on the dashboard, allowing the driver to visually observe the temperature of the engine coolant under any operating condition and take appropriate action promptly. Additionally, an alarm will sound during high temperatures to prevent the car's radiator from overheating.
7
1
Share

How Many Steering Wheel Turns and Steering Angles Are There?

Since the car model is unknown, let's take a small car as an example. Generally, the total number of steering wheel turns from lock to lock is 3, with 540 degrees to each side. The maximum steering angle of the front wheels is about 60-70 degrees. Therefore, turning the steering wheel half a turn would result in the front wheels turning approximately 20 degrees. Below is some information about the steering wheel: 1. Basic Concept: A wheel-shaped device used to control the direction of cars, ships, airplanes, etc. However, the original designer of the steering wheel could not foresee that, with cars becoming faster today, the steering wheel would become a major cause of driver fatalities in the event of an accident. 2. Origin: The steering wheel initially installed on steam cars by the inventor of the automobile was mounted on a vertical steering column. Its drawbacks were that it was inconvenient for the driver to operate and obstructed visibility.
5
3
Share

Is Antifreeze the Same as Coolant?

Antifreeze is not the same as coolant. Coolant is equivalent to water plus antifreeze, referring to the liquid that can lower the engine's temperature, which can be either water or antifreeze. Water is a very low-grade coolant and is also subject to seasonal limitations. The full name of antifreeze should be antifreeze coolant, meaning a coolant with antifreeze properties. It prevents the coolant from freezing and expanding during cold winter stops, which could crack the radiator and damage the engine cylinder block or head. The engine and its cooling system are made of metal, including copper, iron, aluminum, steel, and solder. These metals, when in contact with water under high temperatures over time, will corrode and rust. Antifreeze, however, not only does not cause corrosion to the engine cooling system but also has anti-corrosion and rust removal functions.
4
3
Share

Is FAW a Domestic or Joint Venture Brand?

FAW Bestune is a domestic car brand, not a joint venture. Definition of Joint Venture Cars: Joint venture cars are projects jointly established by Chinese and foreign investors. The Chinese side contributes by providing land and factory usage rights, as well as capital, while the foreign investors provide the brand, technology, capital, talent, etc. Joint venture cars are the result of collaboration. Foreign parties provide technology, talent, and brand for assembly within China, but the core technology remains under foreign control. Reasons for the High Cost of Joint Venture Cars: China's production capacity and intellectual property are insufficient, leading to low dependency on cooperation with foreign automakers. Core technologies such as car engines and transmissions rely on imports, which results in higher prices for joint venture cars.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.