How to set the automatic locking for Trumpchi GS4?

3 Answers
AlanMarie
07/29/25 8:04am
To set the automatic locking function for the Trumpchi GS4, you can visit a 4S dealership and use a specialized computer to access the body control module settings and adjust it via coding. 1. After the adjustment, close all doors, turn the ignition to the ON position (without starting the engine), and press and hold the central locking button for more than 5 seconds. When the hazard lights flash twice, the setup is successful. 2. The automatic speed-sensing locking is an electronic feature that automatically engages the door locks when the vehicle reaches a preset speed, preventing accidental door opening. 3. The preset speed is usually set by the manufacturer, typically between 10-20 km/h. There are other methods for automatic locking while driving. For example, some models from Chevrolet and Buick automatically lock the doors when the transmission is shifted to D (Drive) gear, preventing accidental door opening.
Was this review help?
17
0
Share
Sullivan
08/13/25 3:37am
I've tried the auto-lock function on the Trumpchi GS4 several times, and it's actually quite simple. First, start the vehicle by pressing the brake pedal. Then locate the 'Vehicle Settings' icon on the center console screen, scroll down to find the 'Door Lock Settings' option. Here you'll see a 'Auto Lock While Driving' switch – just turn it on. Every time the speed exceeds 20 km/h, the doors will automatically lock, which feels reassuring. By the way, some older models may require a system update at the dealership to activate this. If you can't find the option, check the owner's manual – page 53 specifically explains this feature. It's good practice to regularly test this function, as driving safety is paramount.
Was this review help?
11
0
Share
Expand All
Ortiz
10/05/25 4:05am
I've taught quite a few people to set this up, mainly through the central control menu. After starting the car, locate the vehicle settings menu and select the door lock control option to find the auto-locking switch. Special attention is needed here - the interface layout may vary between different model years of the Trumpchi GS4. For vehicles manufactured after 2022, it's located in the secondary menu of vehicle settings. Once activated, the doors will automatically lock when the speed reaches 15-20 km/h. A reminder: if your infotainment system is the basic version, you might need to visit a 4S shop for computer activation. If you notice any abnormalities during daily use, it's best to check the fuses or door sensors. This feature is particularly useful for owners with children.
Was this review help?
11
3
Share
Expand All
More Forum Discussions

What Causes a Sedan to Lack Power and Fail to Accelerate When Climbing a Slope?

The reasons why a sedan lacks power and fails to accelerate when climbing a slope are: 1. Excessive carbon buildup in the vehicle; 2. Poor fuel quality; 3. Blocked intake or exhaust system; 4. Worn-out spark plugs; 5. Cylinder misfire; 6. Insufficient tire pressure; 7. Insufficient engine power; 8. Problems with the combustion chamber, ignition system, or valves; 9. Dirty fuel filter, damaged fuel pump, or clogged catalytic converter. Solutions to address a sedan's lack of power and failure to accelerate when climbing a slope include: 1. Cleaning carbon deposits; 2. Using high-quality gasoline; 3. Replacing spark plugs; 4. Regularly checking tire pressure; 5. Periodically cleaning the fuel filter; 6. Inspecting the fuel pump.
6
2
Share

Will the Prado meet China VI emission standards?

The Prado will not meet China VI emission standards due to the total emission restrictions under China VI, which are not suitable for large-displacement SUVs. Taking the 2010 Prado as an example, its body dimensions are: length 4820mm, width 1885mm, height 1845mm, wheelbase 2790mm, minimum ground clearance 220mm, and fuel tank capacity 87L. The 2010 Prado is equipped with a 2.7L naturally aspirated engine, with a maximum horsepower of 163ps and a maximum power of 120kw, paired with a 5-speed manual transmission. It uses a double-wishbone independent front suspension and a four-link solid axle non-independent rear suspension.
2
5
Share

How to Properly Set Up a Dash Cam?

To correctly set up a dash cam: 1. Assemble the dash cam with its mounting bracket; 2. Use the suction cup on the bracket to attach it to the front windshield near the rearview mirror; 3. Connect one end of the power cable (USB port) to the dash cam and the other end to the cigarette lighter; 4. After installation, turn on the dash cam and set the parameters to Simplified Chinese; 5. Configure the time, video resolution, and audio recording. A dash cam is a device that records video and audio information during vehicle operation, capturing the entire driving process to provide evidence in case of traffic accidents.
19
4
Share

What are the reasons for the ABS warning light to come on?

ABS warning light comes on due to a fault in the anti-lock braking system. The possible reasons for the ABS warning light to come on include: 1. Faulty wheel speed sensor; 2. Faulty wheel speed sensor wiring. The methods to reset the ABS warning light are: 1. Visit a repair shop to have it cleared with a computer; 2. Locate the car battery, disconnect the negative terminal, and reconnect it after a few minutes. ABS stands for Anti-lock Braking System, and its functions are: 1. Automatically controlling the braking force during braking to effectively keep the wheels in a rotating state; 2. Improving the stability of the car during braking and the braking performance on poor road conditions.
9
1
Share

What is the function of the 'off' button in a car?

The 'off' button in a car refers to the switch that turns off the vehicle stability control system. The working principle of the vehicle stability control system is as follows: when the vehicle is making a quick turn, dodging, or avoiding a suddenly appearing car or animal, if the vehicle slides outward due to understeer or crosses the centerline of the road or even spins in place due to oversteer, the system uses a computer to control the engine output and apply brakes to any wheel, thereby eliminating understeer or oversteer and improving the dynamic stability of the vehicle. When the car is powered on, the vehicle stability system is enabled by default. Press and hold the 'off' button to turn off the vehicle stability system.
3
4
Share

How to Defog a Toyota Corolla?

Toyota Corolla's defogging steps are: 1. Turn on the car's air conditioning; 2. Adjust the air conditioning to the warm air setting; 3. Turn on the car's external circulation; 4. Press the front and rear defogging buttons, and use warm air to complete the defogging. Taking the Toyota Corolla 2021 model as an example, its body dimensions are: length 4635mm, width 1780mm, height 1455mm, with a wheelbase of 2700mm. The Toyota Corolla 2021 model is equipped with a 1.2T turbocharged engine, with a maximum horsepower of 116ps and a maximum power of 85kw, matched with a continuously variable transmission.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.