How to set the automatic downward tilt of the rearview mirror when reversing in Audi A6L?

1 Answers
MacJack
07/24/25 6:47pm
Audi A6L's method for setting the automatic downward tilt of the rearview mirror when reversing is: 1. Turn on the car's power without starting the engine; 2. Set the memory seat; 3. Select the rearview mirror on the side you want to set and press the rearview mirror adjustment selection button; 4. Step on the brake and shift to R gear; 5. Press and hold the seat memory key; 6. Step on the brake and shift to P gear, then press the rearview mirror adjustment selection button once more to complete the setup. Taking the 2021 Audi A6L as an example, it is a mid-to-large-sized car with body dimensions of: length 5038mm, width 1886mm, height 1475mm, wheelbase of 3024mm, minimum ground clearance of 117mm, and a body weight of 1800kg.
Was this review help?
16
5
Share
More Forum Discussions

Where is the cabin air filter located in the Renault Koleos?

The cabin air filter of the Renault Koleos is located inside the glove compartment in front of the front passenger seat. The recommended maintenance interval for the cabin air filter is approximately 10,000 kilometers or every six months. Taking the 2019 Renault Koleos as an example, it belongs to the compact SUV category with body dimensions of: length 4672mm, width 1843mm, height 1685mm, and a wheelbase of 2705mm. The 2019 Renault Koleos features a MacPherson strut independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine delivering a maximum horsepower of 154PS, maximum power of 113kW, and maximum torque of 204Nm, paired with a 7-speed continuously variable transmission.
19
3
Share

Is It Good to Wax a New Car?

It is not advisable to wax a new car. The car body comes with a layer of factory-applied wax when it leaves the factory, so there is no need to wax it again. You can consider waxing when the car body feels rough to the touch or shows imperfections. The benefits of car waxing include: 1. Preventing aging of the car paint; 2. Maintaining a shiny and new appearance; 3. Protecting against UV rays and acid rain; 4. Effectively filling in minor scratches on the paint; 5. Reducing friction static between the car body and air to prevent dust accumulation. The steps for car waxing are: 1. Rinse the car body with clean water; 2. Use a soft item to wipe the car and remove impurities, then let it dry; 3. Apply wax evenly in a circular motion along the straight lines of the car body from front to back using a waxing sponge; 4. Avoid applying the wax too thickly and do not use sharp objects to scrape the surface during the waxing process.
15
3
Share

Is the Annual Inspection Sticker Required for Vehicle Inspection in 2020?

In 2020, the annual inspection sticker is required for vehicle inspection. Failing to display the annual inspection sticker is considered illegal. The sticker must be prominently placed on the upper right corner of the front windshield. Vehicle inspection helps promptly eliminate potential safety hazards, encourages proper vehicle maintenance, and reduces the occurrence of traffic accidents. Vehicle inspections are categorized into initial inspections and regular inspections. The inspection items include: 1. Checking whether the engine, chassis, body, and related equipment are clean, complete, and functional, whether the paint is uniform and aesthetically pleasing, whether major components have been replaced, and whether they match the initial inspection records; 2. Verifying whether the vehicle's braking system, lights, exhaust, and other safety features comply with relevant regulations; 3. Checking if the vehicle has been modified, altered, or reconstructed, and whether the registration details on the driving license, license plate, and vehicle records match the actual condition of the vehicle; 4. Inspecting the license plate, driving license, and the enlarged license plate print on the vehicle for any damage, tampering, or illegible writing, and determining if replacement is necessary.
14
0
Share

What Causes Automatic Transmission Failure?

The causes of automatic transmission failure are: 1. The hydraulic oil level is too low or too high, generating a large number of bubbles when violently agitated during operation; 2. Excessive wear or burning of the clutch or brake friction plates and brake bands; 3. Excessive wear of the oil pump or leakage in the main oil circuit, resulting in excessively low oil pressure. The troubleshooting methods for automatic transmission failure include: 1. Check whether there is hydraulic oil in the automatic transmission; 2. Check whether the connecting rod or cable between the automatic transmission control lever and the manual valve rocker arm is loose or detached; 3. Check whether hydraulic oil flows out from the pressure measurement hole; 4. Check whether there is looseness between the manual valve rocker arm shaft and the rocker arm, and whether the manual valve core is broken or detached; 5. Check whether the oil pump inlet filter screen is clogged; 6. If there is some oil pressure in the main oil circuit when starting a cold car, but the oil pressure drops significantly when the car is hot, it indicates excessive wear of the oil pump; 7. If a large amount of hydraulic oil sprays out from the pressure measurement hole, it indicates normal oil pressure in the main oil circuit.
11
3
Share

What car has a logo resembling the letter 'T'?

A logo resembling the letter 'T' belongs to Tesla Motors. Tesla is an American electric vehicle and clean energy company that manufactures and sells electric cars, solar panels, and energy storage systems. Taking the 2021 Tesla Model X as an example, it is a mid-to-large-size SUV with the following dimensions: length 5037mm, width 2070mm, height 1684mm, and a wheelbase of 2965mm. Its curb weight is 2352kg. The 2021 Tesla Model X features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a front permanent magnet synchronous motor and a rear AC induction motor, with a combined motor power output of 493kW, paired with a single-speed fixed gear ratio transmission.
4
0
Share

What Are the Effects of Engaging the Handbrake While the Car Is Moving?

The effects of engaging the handbrake while the car is moving depend on the speed of the vehicle: at lower speeds, the car will come to a gradual stop, and the steering wheel may deviate, potentially damaging the brake pads—ranging from wear to outright breakage. Engaging the handbrake at high speeds can cause the rear wheels to lock up, snap the handbrake cable, and lead to drifting, rollovers, or fishtailing, severely compromising driving safety. The dangers of forgetting to release the handbrake while driving include: 1. The brake pump cannot provide sufficient braking force, causing the engine to stall; 2. Accelerated wear of the brake discs and hardening of the brake pads due to friction heat; 3. Stretching of the handbrake cable; 4. Potential leakage of brake fluid from the wheel cylinders, resulting in brake failure.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.