How to set the auto-lock function for Trumpchi GS4?

[OAyla]

To set the auto-lock function for the Trumpchi GS4, follow these steps: 1. Close all doors, turn the ignition to the ON position without starting the engine. 2. Press and hold the central lock button for more than 5 seconds until the hazard lights flash twice, indicating successful setup. Here is an introduction to the auto-lock function of the Trumpchi GS4: 1. The auto-lock function, also known as speed-sensing auto-lock, is an electronic feature that automatically engages the door locks when the vehicle reaches a preset speed to prevent accidental door opening. 2. When the transmission is shifted to D (Drive) gear, the lock buttons will automatically engage to prevent accidental door opening. 3. The doors will automatically lock when the driver applies the brakes while driving.

[LeMatteo]

When I drove the Trumpchi GS4 before, I researched the auto-locking feature. On the central control screen, find the vehicle settings menu, where there's a driving assistance option. Scroll down and you'll see the switch for speed-sensitive auto-locking. Once activated, the doors automatically lock when the vehicle exceeds 15 km/h. This feature is especially useful for taking kids to school, preventing them from accidentally opening the doors while driving. Remember, if someone is inside the car after locking, don't press the hazard lights to unlock from inside, or the safety feature will be disabled.

[OCody]

After starting the engine without driving, locate the control buttons on the left side of the steering wheel. Press the left/right directional keys to switch the dashboard to the settings interface, then navigate to the 'Automatic Door Lock While Driving' option under 'Vehicle Settings'. After enabling it with a checkmark, the screen will flash a confirmation light. Subsequently, the system will automatically lock doors whenever vehicle speed exceeds 20 km/h. Veteran drivers recommend activating this feature, especially during highway traffic jams to prevent door-pulling robberies.

[LilahLee]

The simplest setup method: With the vehicle powered on, press and hold the lock button on the driver's side door panel for five seconds. Upon hearing two beeping sounds, it indicates successful activation, and the dashboard display will show a 'Auto-lock Function Enabled' message. Once activated, this function does not require repeated setup. However, it's advisable to check its status after each maintenance service to avoid accidental deactivation.