···
Log in / Register

How to set the auto-lock feature on the Hyundai Mistra?

4 Answers
MacRemington
07/29/25 4:10pm
The method to set the auto-lock feature on the Hyundai Mistra is: the doors will automatically lock when the vehicle speed reaches 230 kilometers per hour. The Hyundai Mistra is a mid-sized 4-door 5-seater sedan with the following dimensions: length 4780mm, width 1815mm, height 1460mm, and a wheelbase of 2770mm. The Hyundai Mistra is equipped with a 1.5T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 125 kW at 5500 rpm and a maximum torque of 253 Nm between 1500 to 4000 rpm. It features front-wheel drive, with a MacPherson strut independent front suspension and a multi-link independent rear suspension.
Was this review help?
15
3
Share
DiRiley
08/15/25 4:37am
Setting up auto-lock is quite simple. I've adjusted this feature myself when driving my Mistra. First, press and hold the start button without stepping on the brake to power up the vehicle—the dashboard will light up but the engine won't start. Then, use the control buttons on the right side of the steering wheel to access the trip computer menu. Find the vehicle settings option, enter it, and select the door lock settings. There, you'll see an auto-lock option—just turn it on. The doors will automatically lock when the speed exceeds 15 km/h. This feature is very helpful for driving safety, especially when traveling with kids, as it eliminates the need to manually lock the doors. Note that operation interfaces may vary slightly across different model years—if unsure, check the manual. Nowadays, it's generally recommended to enable this feature for new cars on the road, as it effectively prevents theft and accidental door openings.
Was this review help?
15
4
Share
Expand All
LaKiara
10/12/25 6:13am
Last week, I just helped a friend adjust the auto-lock feature on his Mistra. Before starting the car, press the start button twice to power on. Use the steering wheel menu button to enter the vehicle settings interface, then select the central door lock section. There will be an option for speed-sensitive auto-locking—just check the box to enable it. Remember to save and exit after setting. A little tip: Some models require shifting to D gear to activate the function. It's best to test drive after setting, reaching around 20 km/h to see if the doors lock automatically. If the system doesn't respond, it might be due to low battery voltage or a program glitch—restarting the vehicle usually fixes it.
Was this review help?
13
0
Share
Expand All
IsabelLee
11/25/25 7:16am
As a Mistra owner, sharing some tips on setting up the auto-lock feature. After entering the car and pressing the power button to turn on the ignition, navigate to the settings menu on the dashboard. Locate the door lock section under vehicle settings. After enabling the speed-sensing auto-lock function, remember to press the confirmation button on the steering wheel to save. The setup takes less than two minutes but significantly enhances safety. Once at a city traffic light, someone unexpectedly tried to open my door - thankfully the locks engaged in time. I recommend all new owners activate this feature, especially those frequently transporting children, to prevent accidental door openings while driving.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

How often should a sedan be driven at minimum?

It is recommended to drive a sedan at least once a month and run the engine for over half an hour. Precautions for long-term parking of vehicles include: 1. Clean and maintain the vehicle before parking; 2. Park the car in a garage or choose a dry and shaded area whenever possible; 3. Regularly check tire pressure and inflate promptly when insufficient, while also monitoring tire aging; 4. Thoroughly inspect items inside the car before parking, ensuring no food, beverages, or food packaging waste is left behind. The impacts of prolonged vehicle parking are: 1. Premature failure and aging of oil seals, leading to oil leaks; 2. Shortened battery lifespan; 3. Tire deformation due to prolonged pressure on contact areas; 4. Malfunctions in electronic components; 5. Oil oxidation corroding mechanical parts; 6. Aging of the braking system.
5
2
Share

What to Do If a Small Amount of Paint is Scratched Off the Car?

If a small amount of paint is scratched off the car, you can use a touch-up pen or perform a touch-up. The steps for touch-up are as follows: 1. Thoroughly clean the surface to be repaired before starting; 2. Use alcohol to remove wax, moisture, oil, and rust from the area to be repaired to enhance the adhesion of the paint film; 3. Shake the touch-up pen vigorously before use, hearing the sound of the mixing ball for at least 30 shakes; 4. Open the cap of the touch-up pen in an upright position to avoid paint spillage; 5. For deeper scratches, apply the paint repeatedly with the brush; 6. The area touched up with the pen may be slightly uneven. After the paint film dries, use 2000-grit wet sandpaper to smooth it until the surface is level with the surrounding area.
3
4
Share

How to Turn on the High Beam in a Civic?

The method to turn on the high beam in a Civic is: 1. Enter the vehicle and locate the light control lever; 2. Push the lever forward for high beam, and pull it backward for a single high beam flash. Usage of Civic's light control positions: 1. Turn the left knob to the 'off' position to turn off the lights; 2. Turn the left knob to the middle position to turn on the parking lights; 3. Turn the left knob to the lower position to turn on the low beam; 4. Use the middle knob to control the fog lights; 5. Push the lever upward for the right turn signal, and downward for the left turn signal. Adjust the Civic's light positions according to actual driving conditions and needs to ensure driving safety.
12
4
Share

How to reset the maintenance light on the Bora 1.6?

The maintenance light on the Bora 1.6 cannot be reset manually. Resetting requires the use of a specialized diagnostic tool. The first maintenance is preset by the manufacturer, and after the first maintenance, the 4S shop will set the reminder for the next maintenance. The Bora is a model under FAW-Volkswagen, with body dimensions of 4523mm in length, 1775mm in width, and 1467mm in height, and a wheelbase of 2610mm. In terms of appearance, the front design of the Bora incorporates Volkswagen's design language, integrating streamlined lines into the front design. Precise and bold lines connect the headlights with the chrome-plated grille. The contour lines of the headlights are precisely matched with the internal styling lines and complement the chrome grille, forming Volkswagen's signature front face.
14
5
Share

How to Properly Start a Geely Boyue Automatic Transmission?

To properly start a Geely Boyue automatic transmission, ensure the vehicle is stationary, depress the clutch pedal, and press the start button. Taking the 2021 Geely Boyue as an example, its body dimensions are: length 4519mm, width 1831mm, height 1694mm, with a wheelbase of 2670mm, fuel tank capacity of 58 liters, and curb weight of 1575kg. The 2021 Geely Boyue features a MacPherson strut independent front suspension and a multi-link non-independent rear suspension. It is equipped with a 1.8L turbocharged engine, delivering a maximum horsepower of 163PS, maximum power of 120kW, and maximum torque of 250Nm, paired with a 6-speed manual transmission.
17
3
Share

What is the role of the planetary gear mechanism in an automatic transmission?

The role of the planetary gear mechanism in an automatic transmission is: 1. To use clutches and brakes to change the relative motion relationships of the components within the planetary gear mechanism; 2. To achieve different gear transmissions, altering the transmission ratio and direction. The planetary gear mechanism consists of a sun gear, ring gear, planetary carrier, and planet gears. The working principles of the planetary gear mechanism are: 1. Power is input from the sun gear and output from the ring gear, with the planetary carrier locked by the mechanism; 2. Power is input from the sun gear and output from the planetary carrier, with the ring gear locked; 3. Power is input from the planetary carrier and output from the sun gear, with the ring gear locked; 4. Power is input from the planetary carrier and output from the ring gear, with the sun gear locked.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.