How to set the air conditioning in Trumpchi GS8?
5 Answers
The air conditioning control panel of the Trumpchi GS8 is located on the center console. Press the AUTO button, and in this mode, the system automatically adjusts the rear area temperature, blower speed, and air circulation distribution. The OFF button is used to turn off the air conditioning system. The A/C cooling switch is used to turn on or off the air conditioning cooling. Press the A/C switch to turn on the air conditioning cooling. Below is additional information about the Trumpchi GS8 air conditioning system: 1. Compression process: The compressor sucks in low-temperature and low-pressure refrigerant gas from the evaporator outlet and compresses it into high-temperature and high-pressure gas, which is then discharged from the compressor. 2. Heat dissipation process: The high-temperature and high-pressure superheated refrigerant gas enters the condenser, where the pressure and temperature decrease, and the refrigerant gas condenses into a liquid, releasing a large amount of heat. 3. Throttling process: The higher-temperature and higher-pressure refrigerant liquid passes through the expansion device, causing its volume to increase, and the pressure and temperature drop sharply, discharging from the expansion device in a mist form (fine liquid droplets). 4. Heat absorption process: The mist-like refrigerant liquid enters the evaporator, where the boiling point of the refrigerant is much lower than the temperature inside the evaporator, causing the refrigerant liquid to evaporate into gas.
I've been driving the GAC GS8 for several years, and the air conditioning settings are actually quite simple, basically easy to understand at a glance. Once you start the engine after getting in the car, press the AUTO button on the center console, and the system will automatically operate, adjusting the fan speed based on the temperature you set. To adjust the temperature, just turn the large knob left or right—turn it towards lower temperatures in summer and higher temperatures in winter. For daily driving, I usually set the temperature around 24-26°C, which keeps it neither too cold nor too hot. Fan speed usually doesn’t require manual adjustment, but if the airflow is too weak, you can press the fan speed button nearby to increase it. The air recirculation button is important—use it in heavy traffic to reduce exhaust fumes and switch to fresh air mode on highways for better ventilation. In summer, opening the windows for a while before turning on the AC helps save fuel. Also, remember to replace the cabin air filter every six months to avoid unpleasant odors. Overall, this system responds quickly, operates quietly, maintains accurate temperature control, and ensures a comfortable experience on long drives.
As someone who enjoys delving into car features, I find the air conditioning design of the GAC GS8 very user-friendly. The core operation involves just two steps: press the AUTO button on the center console after starting the vehicle for automatic control, then rotate the temperature knob to your desired setting. The fan speed buttons allow you to increase or decrease airflow, while the mode button selects the vent position, such as defrosting the windshield to prevent fogging or directing warm air to the feet. In automatic mode, the system uses sensors to detect temperature fluctuations inside the car and intelligently adjusts compressor power and fan speed. In manual mode, pay attention to the responsiveness of the buttons to avoid misoperation. During seasonal changes, press the AC button in summer for quick cooling, while in winter, skip the AC button and rely on engine heat for warming. Regarding maintenance, the air conditioning system's filter affects airflow quality and efficiency, so regular inspection or replacement helps maintain performance. The interface is clear and intuitive, making it easy for beginners to understand without disrupting driving rhythm.
When using the car's air conditioning, I prioritize convenience and comfort. After starting the car, I press the AUTO button and set the temperature to around 25°C with the temperature knob—the automatic fan speed adjustment is quite thoughtful. If the airflow feels too strong, I simply reduce it manually with the button. I prefer setting the air distribution mode, such as dual-level airflow, to ensure a warm sensation throughout the body. The recirculation button is a daily helper: I use internal circulation in the city to block dust and switch to external circulation in the suburbs for fresh air. The AC operates quietly, making nighttime drives restful. Key points: Avoid setting the temperature too low to prevent catching a cold; don’t worry about the brief blast of cold air when first turning on the AC—it’s normal; clean the filter regularly for cleaner airflow, especially helpful for those with allergies. Overall, it’s simple and smooth, ensuring a comfortable ride every time.
For us young people, the air conditioning settings in the Trumpchi GS8 are super straightforward. After starting the car, just press the AUTO button on the center console, and the system takes over immediately. Use the knob to slide to your ideal temperature, like 22°C in summer or 20°C in winter. The fan speed and mode can be changed with a light tap on the touchscreen, and the response is quick. If it has touch controls, sliding to adjust the temperature is even cooler, and the app might also support remote preheating or dehumidification (depending on the model). Switching between internal and external circulation with the button is fast, avoiding odor issues. Related tips: Adjust the fan while charging your phone when getting in or out of the car to save hassle; if you're unfamiliar, start with AUTO—the system optimizes automatically, which is easier than manual adjustments; for short commutes, keep the settings simple to maintain a constant temperature, saving energy efficiently. This clean design makes daily driving efficient and stress-free.
