How to Set Silent Locking for Geely Emgrand?

1 Answers
VanVera
07/30/25 3:17am
Geely Emgrand silent locking can be set as follows: 1. Press and hold the car's unlock switch for at least two seconds, then quickly press the lock button after completing the locking process, and observe whether the car emits a locking sound. 2. You can use the maintenance computer at a 4S shop to modify and set the silent locking mode. Below is some relevant information about the Geely Emgrand: 1. The body dimensions of the Geely Emgrand are 4632mm in length, 1789mm in width, and 1470mm in height, with a wheelbase of 2650mm. 2. The 1.5L naturally aspirated engine has a maximum horsepower of 109 HP and a peak torque of 140 Nm, paired with a 5-speed manual transmission. The 1.3T model is paired with a 6-speed manual transmission, with the 1.3T engine delivering a maximum horsepower of 133 HP and a maximum torque of 185 Nm.
Was this review help?
11
3
Share
More Forum Discussions

What is the maximum speed limit during the break-in period of a new car?

The maximum speed during the break-in period of a new car is 80 kilometers per hour. The items for the first maintenance of a new car are: 1. Replace the engine oil, oil filter, fuel filter, and air filter; 2. Check whether the level of the car coolant meets the requirements; 3. Check the level of the brake and clutch fluid; 4. Check whether the oil level in the power steering fluid reservoir meets the requirements; 5. Check whether there is any oil leakage at the oil pipe interfaces; 6. Check the level of the battery fluid and the windshield washer fluid; 7. Check the tightness and aging of the belts for the generator, air conditioner, water pump, and power steering pump; 8. Check the tire pressure and wear condition of the car; 9. Check whether the car's exhaust emissions meet the standards.
10
0
Share

What Causes Vibration After Vehicle Startup?

The reasons for vibration after vehicle startup are: 1. Abnormal fuel pump supply pressure or incorrect readings/malfunction of the intake pressure sensor; 2. Aging of engine components or engine mounts; 3. Dirty throttle body or excessive carbon buildup in fuel injectors; 4. Abnormal engine coolant temperature. The vehicle starting procedure is: 1. After sitting in the driver's seat, press the start button once for ACC light, then press again for system self-check; 2. Depress brake pedal and press engine start button for ignition; 3. Release foot brake and optionally warm up the engine; 4. Depress brake pedal again, shift to D gear and release parking brake (for electronic parking brake, simply press the button); 5. Gradually release foot brake to complete the starting process.
4
2
Share

Is the new Volkswagen Lavida compliant with China 6 emission standards?

The new Volkswagen Lavida is compliant with China 6 emission standards. The methods to check a vehicle's emission standard are: 1. Check the vehicle conformity certificate; 2. Check the environmental protection list. Taking the 2021 Volkswagen Lavida as an example, its body dimensions are: length 4670mm, width 1806mm, height 1474mm, wheelbase 2688mm, fuel tank capacity 51l, trunk capacity 510l, and curb weight 1318kg. The 2021 Volkswagen Lavida is equipped with a 1.4l turbocharged engine, with a maximum horsepower of 150ps, maximum power of 110kw, maximum torque of 250nm, matched with a 7-speed dual-clutch transmission.
12
3
Share

How to Check for Electrical Leakage in a Motorcycle?

Checking for electrical leakage in a motorcycle typically involves turning off the ignition, removing the battery, and using a multimeter's resistance setting to measure for continuity. If the discharge exceeds 0.1A, it indicates a leakage; under normal conditions, no current should be detected. Here is an introduction to motorcycles: 1. Working Principle: Based on the working principles of four-stroke and two-stroke engines. 2. Components of a Motorcycle: Consists of five main parts - the engine, transmission system, running gear, steering and braking systems, and electrical instrumentation. 3. Basic Concept: A two- or three-wheeled internal combustion vehicle with one or two saddle seats for passengers. A flexible and fast means of transport, also used in military and sports competitions. Equipped with an internal combustion engine. There are both two-wheeled and three-wheeled motorcycles.
3
3
Share

Can a car be left in the sun after painting?

It is not advisable to leave a car in the sun after painting. This can lead to consequences such as peeling and discoloration. Below is relevant information about automotive paint: 1. Definition: Paint is a chemical mixture coating that firmly adheres to the surface of an object, serving purposes such as protection, decoration, marking, and other special uses. The authoritative book "Paint Technology" in China's coatings industry defines it as: "Paint is a material that can be applied to the surface of an object through different construction processes, forming a firmly adhered, solid film with certain strength and continuity. This formed film is commonly referred to as a coating, also known as a paint film or layer." 2. Composition: Paint generally consists of four main components: film-forming substances, fillers (pigments), solvents, and additives. Depending on performance requirements, the composition may vary slightly, such as clear lacquer not containing pigments or fillers, and powder coatings possibly not containing solvents.
20
2
Share

What is the purpose of turn signals?

The purpose of turn signals is to indicate to pedestrians or other vehicles the direction in which the vehicle is about to turn, either left or right. On highways, they also indicate the direction for overtaking or lane changing. When both left and right turn signals flash simultaneously, it indicates that the vehicle is in an emergency situation, alerting other vehicles to be cautious. The method to use turn signals is: 1. Push the turn signal lever to the left to activate the right turn signal; 2. Push the turn signal lever to the right to activate the left turn signal; 3. Lift the turn signal lever upwards to make the turn signals flash. The functions of turn signals are: 1. To indicate the turning direction to pedestrians or vehicles; 2. To indicate the direction for overtaking or lane changing; 3. When both left and right turn signals are lit simultaneously, it indicates that the vehicle is in an emergency situation, alerting other vehicles to be cautious.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.