How to Set One-Touch Window Lift for Trumpchi GS4?

[BrielleMarie]

Method for one-touch window lift in Trumpchi GS4: Press and hold the lock button on the remote control. Below are some relevant details about the Trumpchi GS4: 1. In terms of dimensions, the Trumpchi GS4 is positioned as an "International New Generation SUV", with a body length, width, and height of 4545×1856×1700mm and a wheelbase of 2680mm. 2. For the exterior, the Trumpchi GS4 adopts the latest "Lingyun Wing 3.0" design language. 3. In terms of power, the Trumpchi GS4 is equipped with a third-generation 270T 1.5T high-power engine, paired with a new Aisin 6-speed automatic transmission, delivering a maximum power of 124kW and a peak torque of 265Nm. The application of GCCS combustion control patented technology ensures a balance between high performance and low fuel consumption, achieving a class-leading low fuel consumption of 6.8L/100km.

[Beth]

The one-touch window control feature of the Trumpchi GS4 is quite convenient, primarily operated through the driver's side control buttons. Here's a detailed guide: First, start the car to power on, then fully lower the window and continue holding the down button for about 10 seconds without releasing it. Immediately after, raise the window to the top and similarly hold the up button for 10 seconds without letting go. At this point, you'll hear a 'beep' sound, indicating successful initialization. From then on, a light press of the button will automatically raise or lower the window to its full extent. If you wish to stop midway, simply tap the opposite button. In case of malfunction, such as after a battery disconnect, repeating this initialization process will restore the feature.

[DeclanAnn]

I've been driving the GS4 for two years and found that one-touch window lift failure is mostly due to lost initialization. Here's a simple three-step solution: First, after starting the vehicle, continuously hold down the driver's side window down button until the glass fully lowers, then keep holding for 10 more seconds. Second, immediately pull up the window lift button to the top and continue holding for 10 seconds. Third, you'll hear a confirmation beep indicating successful setup. A little tip: the anti-pinch function might interrupt the setup, so ensure no objects are stuck in the window gap during operation. After successful setup, a short press will activate automatic window operation, and holding the lock button on the key fob for three seconds while locking will automatically close all windows.

[LaJude]

The key to setting is to let the system memorize the window positions. First, lower the window all the way down and hold for 10 seconds, then raise it all the way up and continue holding for another 10 seconds. After initialization, a short press of the switch will automatically raise or lower the window. The same method applies to the passenger side and rear windows, which can be set individually. Be careful not to release the switch during the setting process.