How to Set One-Touch Window Lift for Nissan Sylphy?
3 Answers
To set the one-touch window lift function for Nissan Sylphy, follow these steps: 1. Lower the driver's side window completely; 2. Turn the ignition switch off and then back to the ON position; 3. Pull up the window switch; 4. Keep holding the switch for 5-10 seconds after the window fully closes; 5. Turn off the ignition and wait for 10 seconds to complete the setup. Taking the 2021 Nissan Sylphy as an example, it features a 4-door, 5-seater sedan body structure with dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, a wheelbase of 2700mm, a fuel tank capacity of 50 liters, and a trunk capacity of 510 liters.
When I drove the Nissan Sylphy before, setting the one-touch window roll-up feature was especially convenient and quite practical. You just need to sit in the driver's seat and turn the key to the ON position until the dashboard lights up—no need to start the engine. Then, locate the window-up button on the left door, hold it down, and wait until all the windows close. Continue holding for another three to five seconds until you hear the system beep to confirm the setting. Once done, you can automatically roll up all windows by long-pressing the unlock button on the remote. Note that there might be slight variations depending on the model year of the Sylphy—some may require activating the anti-pinch function via the central control menu. I recommend testing it in the car patiently, prioritizing safety to avoid pinching your fingers. I found this feature very handy for daily use, saving a lot of hassle.
Setting up the one-touch window lift for the Nissan Sylphy is simple with just a few steps. Sit in the car, turn the ignition switch to the ON position, then press and hold the window up button until all windows close and hold for about three seconds. Release the button, and the system will memorize the setting. Afterward, when locking the car with the remote, press and hold the unlock button, and the windows will automatically roll up. For Sylphy models after 2015, this operation is generally applicable. If older models don't respond, try resetting the button combination. Be cautious not to force the button if the window is stuck. This feature saves time on manual operations and is very practical.
