How to Set One-Touch Power Window for Nissan Sylphy?
2 Answers
The method to set one-touch power window for Nissan Sylphy is: 1. Turn the ignition switch to the ON position; 2. If the driver's side window is closed, pull the driver's side window switch to the halfway or more position; 3. Pull up and close the driver's side window switch; 4. After the window is fully closed, hold the switch for about 3 seconds, then release; 5. Check if the power window function works properly. Taking the 2021 Nissan Sylphy as an example, its body dimensions are: length 4631mm, width 1760mm, height 1503mm, wheelbase 2700mm, fuel tank capacity 50L, trunk capacity 510L. The 2021 Nissan Sylphy is equipped with a 1.6L naturally aspirated engine, with a maximum horsepower of 122PS, maximum power of 90kW, maximum torque of 155Nm, matched with a 5-speed manual transmission.
I've been driving the Sylphy for a while, and setting up the one-touch window lift is actually quite simple. First, you need to put the car in the power-on state without starting the engine, just keeping the power on is enough. Then, use the window button on the driver's side to lower the glass completely, holding it down until it reaches the bottom and stops. Next, pull the button up to raise the glass to the top, and at this point, don't release it—hold it for about 5 to 10 seconds, and the system will remember this action. Once done, test it with a quick press, and the glass will automatically rise to the top. This feature is very practical, allowing you to drive without holding the button continuously, making it safer and more convenient. However, make sure the battery has enough charge, or the setup might not succeed. My car is a newer Sylphy model, and sometimes it takes a few tries to stabilize. It's advisable to check the manual for your car's model year, as there might be slight differences in configurations, like button positions, but the method is generally the same. After setting it up, test the anti-pinch function to ensure passenger safety.
