How to Set Cruise Control on the Sagitar?

1 Answers
DelJasper
07/29/25 6:03pm
The method to set cruise control on the Sagitar is: 1. Press the cruise control switch to turn on the system; 2. Accelerate to the desired speed, then press the SET button—you can now release the accelerator as the speed is locked at the current value. 3. Use the RES and SET buttons to fine-tune the speed. Taking the 2021 Sagitar as an example, it is a compact car with body dimensions of 4753mm in length, 1800mm in width, and 1462mm in height, a wheelbase of 2731mm, a minimum ground clearance of 108mm, and a curb weight of 1355kg. The 2021 Sagitar features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 1.2T turbocharged engine delivering a maximum horsepower of 116PS, a maximum torque of 175Nm, and a maximum power output of 85kW, paired with a 5-speed manual transmission.
Was this review help?
8
5
Share
More Forum Discussions

How to Adjust the Steering Wheel of Beijing Hyundai?

Steering wheel adopts mechanical adjustment method, which can be adjusted telescopically in the front and rear directions as well as up and down. Sometimes the lock release lever does not lock the steering wheel, which is not a malfunction. Pull down the lock release lever on the steering column to adjust the angle and position of the steering wheel. Move the steering wheel towards the driver's chest rather than the face.
2
0
Share

Which Province Has Canceled Gear Shifting?

Guangdong Province has canceled gear shifting. Benefits of canceling gear shifting: For students who are not very proficient in gear shifting, canceling it is a blessing. They no longer have to worry about failing due to shifting into the wrong gear. The gear shifting test not only requires correct gear selection but also matching speeds. For example, shifting into fourth gear at 20 km/h would still result in failure. After canceling gear shifting, if the speed does not match, the maximum penalty is a deduction of 10 points, and the test is still considered passed. Correct techniques for gear shifting in Subject 3: Upshifting: Start by pressing the clutch, shift into 1st gear, engage the half-clutch and accelerate. When the speed reaches around 15 km/h, release the throttle, press the clutch, and shift into 2nd gear. Release the clutch and accelerate. When the speed reaches around 25 km/h, release the throttle, press the clutch, and shift into 3rd gear. Release the clutch and accelerate. Downshifting: Press the brake to reduce speed below 20 km/h, release the brake, press the clutch, and shift into 2nd gear. Continue braking to reduce speed below 10 km/h, release the brake, press the clutch, and shift into 1st gear.
15
2
Share

How to Properly Start a Mondeo Automatic Transmission Car?

After the driver sits in the driver's seat, press the start button once, then press it again; at this point, the vehicle performs a self-check. Depress the brake pedal and press the start button once more to ignite and start the engine. Release the foot brake; you may choose to warm up the car in place. Shift to D gear and release the handbrake. Slowly release the foot brake to start; after starting, you should quickly enter the road and drive at the prescribed speed.
3
3
Share

Will Traffic Violation Cameras Flash at Night?

It depends on the type of electronic monitoring device—some will flash, while others won't. Violation Capture: Electronic monitoring devices use induction loops to detect the pressure from vehicles on the road. The signals are collected by sensors and sent to the central processing unit, temporarily stored in registers (this data remains valid for the duration of one red light cycle). The license plate recognition rate is over 95% during the day and over 90% at night. The vehicle capture rate is 100% (excluding two-wheeled motorcycles, etc.). The recognition time is approximately one second. Applicable vehicle speeds range from 5 to 180 km/h. Electronic Monitoring: "Electronic eyes," also known as "electronic police," are the colloquial term for the "Intelligent Traffic Violation Monitoring and Capture Management System." Developed and successfully implemented in Shenzhen in 1997, they have since been gradually promoted for use nationwide. Electronic eyes utilize various technologies such as vehicle detection, photoelectric imaging, automatic control, network communication, and computer processing to monitor traffic violations around the clock. They capture violations such as running red lights, driving in the wrong direction, speeding, crossing lines, and illegal parking, recording image and text data of the violations for subsequent processing based on the captured information.
12
3
Share

How to remove the wiper of BAIC EU5?

Lift the metal wiper arm away from the windshield and keep it steady in a position perpendicular to the windshield; Then press the tab and remove the old wiper blade, separating it from the metal arm, and insert the new wiper; Gently rotate the new wiper blade until the hook snaps into place to secure it, then place the wiper blade back on the windshield. The swinging motion is achieved using a worm gear reducer connected to the motor.
5
3
Share

How to Check Traffic Violations for Large Vehicles?

Bring your vehicle registration certificate and driver's license directly to the local traffic police brigade in your urban area for inquiry. They will list all violation items, and you can choose to print them at any time before the vehicle inspection. You can also go to the vehicle management office to inquire. There is a self-service inquiry system in the hall of the vehicle management office. You only need to enter the license plate number of the vehicle in your province to check the violation information. Additionally, you can inquire and handle violations at the self-service payment platform terminal for traffic violation information inquiries in the vehicle management office/traffic police brigade.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.