How to Set 4-Door Unlock for Sagitar?

1 Answers
VanJackson
07/29/25 5:18pm
To set the one-touch four-door unlocking function, simultaneously press the unlock and lock buttons on the remote key, then release when the turn signal flashes once. The auto-locking feature serves anti-theft purposes, quickly locking doors after driving to prevent door-pulling robberies during traffic jams or at red lights, providing certain security benefits. It also protects child passengers by preventing them from opening door handles while the vehicle is in motion. The method to set Sagitar's auto-door lock is: First, depress the brake pedal, shift the gear lever to P position, then release the brake pedal. Press the one-touch start button twice to power off all systems. Close all four doors, then press and hold the driver's door lock button for over 10 seconds to complete setup. The Sagitar is a compact sedan under FAW-Volkswagen, measuring 4544mm in length, 1760mm in width, and 1461mm in height, with a 2578mm wheelbase. It offers three engine options: 1.4TSI, 1.8TSI, and 1.6L naturally aspirated. Door unlocking methods: Use the smart key to lock/unlock the vehicle. Keyless entry function: Touch the sensor area inside the door handle to unlock. When the smart key battery dies, extract the mechanical key from it, insert into the mechanical keyhole. Turn left to lock, right to unlock.
Was this review help?
1
5
Share
More Forum Discussions

What Does Driving Assistance Mean?

Driving assistance refers to providing support to the driver during the process of driving, making it easier and safer for the driver to operate the vehicle on the road. Systems such as Lane Keeping Assist (LKA) and Automatic Parking Assist (APA) are examples of driving assistance technologies. The Lane Keeping Assist system uses cameras to identify the lane markings on the road. When the system detects that the vehicle may deviate from the lane, it can alert the driver or intervene in the steering system to adjust the driving path in time. Common driving assistance systems include Lane Keeping Assist, Automatic Parking Assist, Brake Assist, Reverse Assist, and Driving Assist systems.
1
0
Share

What is the fault when the OBD light appears on the dashboard?

The OBD light appearing on the dashboard is the engine exhaust system fault indicator. OBD stands for On-Board Diagnostics in Chinese. This system continuously monitors the operating conditions of the engine and the working status of the exhaust after-treatment system. Once it detects a situation that may cause excessive emissions, it immediately issues a warning. How OBD works: 1. The OBD device monitors multiple systems and components, including the engine, catalytic converter, particulate filter, oxygen sensor, emission control system, fuel system, EGR, etc.; 2. OBD connects to the Electronic Control Unit (ECU) through various emission-related component information. The ECU has the function of detecting and analyzing emission-related faults. When an emission fault occurs, the ECU records the fault information and related codes, and issues a warning through the fault light to inform the driver. The ECU ensures access to and processing of fault information through a standard data interface.
5
5
Share

How to Clean a Car Fuel Tank?

Methods for cleaning a car fuel tank: 1. Exterior: Inspect and clean the exterior of the fuel tank, checking for dents and leaks in the tank, fuel lines, and connectors. Tighten the fuel tank bracket mounting bolts. If any dents or leaks are found, remove and repair the damaged components. 2. Interior: Open the fuel tank cap, remove the filter screen, and siphon out some of the fuel, leaving about 30L of fuel in the tank. Insert a clean compressed air pipe into the fuel tank through the filler neck, reaching the bottom. Use air pressure to agitate the fuel at the bottom of the tank for cleaning. During cleaning, you can slightly block the filler neck with a clean cloth while continuously changing the position and direction of the air pipe's lower end. After blowing and cleaning for 20 minutes, immediately drain the fuel from the tank to allow any suspended impurities to flow out with the fuel.
10
0
Share

What is the fuel pressure for gasoline cars?

The fuel pressure for gasoline cars typically ranges between 300 kPa and 350 kPa. It's important to note that the fuel pressure may vary depending on the vehicle model. Generally, a pressure around 300 kPa (equivalent to 0.3 MPa) is considered normal. Gasoline is a volatile, flammable hydrocarbon mixture liquid derived from petroleum through distillation or cracking processes, primarily used as fuel for spark-ignited internal combustion engines. It mainly consists of organic compounds obtained from crude oil distillation and various additives. Automotive gasoline resists knocking and ensures proper combustion. When the air-fuel mixture in a gasoline engine's combustion chamber is ignited by the spark plug, the flame should propagate evenly and stably throughout the entire chamber.
5
1
Share

How to Properly Place the Novice Driver Sticker on a Car?

Novice driver stickers should be placed on the rear window of the car. The exact position can be chosen freely by the car owner, but it must be conspicuous to serve as a warning to vehicles behind. The novice driver sticker is a marker used to alert others that a new driver is on the road. The main color of the novice driver sticker is yellow (C0M0Y100K0), with an accent color of orange-red (C0M80Y100K0). During the probationary period, motor vehicle drivers are not allowed to drive buses, commercial passenger vehicles, police cars, fire trucks, ambulances, engineering rescue vehicles, or vehicles carrying explosives, flammable and explosive chemicals, highly toxic or radioactive materials, and other hazardous substances. Additionally, the motor vehicle driven must not tow a trailer.
11
1
Share

Why is the car cooling fan not working?

Possible reasons why the car radiator fan is not working: Water temperature issue: Most car radiator fans nowadays operate using electronic temperature control. Therefore, the fan will only start rotating normally when the internal water temperature of the car reaches the required level. If the temperature is too low, the radiator fan will not rotate. Thus, if the car radiator fan is not working, you should check whether the water temperature has reached the required level. Relay malfunction: If the water temperature is appropriate but the car radiator fan still does not work, the issue might lie with the fan's relay. If the relay is faulty, the car's radiator fan will also fail to operate. Thermostat switch problem: If the above two aspects are not the issue, then you should inspect the thermostat switch. Sometimes, the thermostat switch can develop faults, which can also affect the operation of the car radiator fan.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.