How to Self-Rescue When the Car Battery is Dead and Won't Start?

2 Answers
Gianna
08/29/25 2:33am
The self-rescue methods when the car battery is dead and won't start are: 1. Push-start the car for manual transmission vehicles; 2. Use jumper cables to connect two cars and charge the battery; 3. Use a car-specific power bank to charge the vehicle. The maintenance methods for car batteries are: 1. Avoid excessive discharge of the battery, and recharge promptly after excessive discharge; 2. Disconnect the battery power if the vehicle is not used for a long time; 3. Prevent short circuits in the battery; 4. Regularly check if the connections are secure and if the terminal surfaces are clean to ensure good contact; 5. Do not place metal tools or conductive objects near the battery terminals to avoid short circuits.
Was this review help?
4
4
Share
VanMartin
09/10/25 7:18am
Hey buddy, the other day my car wouldn't start either—the battery just gave up. First, I checked if it was really dead by turning on the headlights to see if they were dim or completely off—that's usually a clear sign. Since I was stranded on the roadside, I called a friend to jump-start my car with jumper cables: two cables, one red and one black. First, connect the positive terminals (red clamp to red terminal) of both cars, then the negative (black clamp to my car frame or engine metal). Start his car, wait a few minutes, and then try my engine. It fired right up—easy fix. After that, I bought an emergency jump starter to keep in the car, and now I check the battery life during every service to avoid getting stuck. Remember, don’t do this in heavy traffic—it’s risky. If you don’t have tools, call roadside assistance or your insurer—most services are free. Batteries usually last 2-3 years; problems arise when you neglect them. Prevention is key—like not draining it by running the AC with the engine off.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

What are the risk factors brought by the structural characteristics of the vehicle itself?

Vehicle structural characteristics bring risk factors such as large body size, high total mass when fully loaded, and the presence of visual blind spots. Related explanations: 1. Reasons: The large body size (longer body, occupying multiple lanes during turning, reversing, parking, and overtaking, being wider and taller), high total center of gravity when fully loaded, prone to rollover, and the existence of visual blind spots are detrimental to driving safety. 2. Risks: In addition to the risks caused by the vehicle's structure itself, improper operations by the driver can also pose dangers. For example, fatigue driving without adequate rest after long-distance driving. To prevent fatigue driving, the ideal arrangement is to drive continuously for two hours and then rest for 15 minutes.
11
4
Share

What does no-fault compensation in auto insurance mean?

No-fault compensation in auto insurance refers to a situation where in a traffic accident, one party is fully at fault while the other party bears no responsibility at all. In this case, if the at-fault party suffers vehicle damage but no personal injuries, the non-responsible party is not required to bear any costs. The repair expenses for the vehicle, among others, will be covered by the at-fault party's insurance company. If personal injuries or fatalities occur on the part of the at-fault party, according to the no-fault compensation clause under compulsory insurance, the insurance company of the non-responsible party is also required to compensate the injured or deceased party within the no-fault compensation limit. This effectively transfers the liability to the insurance company.
2
1
Share

How to Replace a Lost Supplemental Page of a Motor Vehicle Driver's License?

If the supplemental page of your driver's license is lost, you need to visit the vehicle management office of the local traffic police to apply for a replacement. Required documents for replacing the driver's license: 1. Application Form: A signed 'Motor Vehicle Driver's License Application Form' by the license holder, which can be obtained at the driver management window of the local district or county traffic police branch (or detachment), driving schools, or designated digital photo centers for driver's licenses. 2. Identification: The original and a copy of the license holder's ID card. 3. Photos: The license holder's digital photo and the receipt of the driver's license digital photo inspection. 4. Proxy Authorization: In case of proxy application, a power of attorney and the proxy's ID card and its copy should also be submitted. 5. Loss Statement: A written 'Declaration of Lost Driver's License' signed by the license holder.
1
4
Share

Does C1 Driver's License Demerit Points Extend the Probationary Period?

For holders of a C1 driver's license, if demerit points are incurred during the probationary period but do not reach 12 points, the probationary period will not be extended. Additional information regarding demerit points during the probationary period is as follows: 1. The demerit point cycle for traffic violations is 12 months, with a total of 12 points. Depending on the severity of the violation, points can be deducted as follows: 12 points, 6 points, 3 points, 2 points, or 1 point. In practice, there are also cases where 0.5 points are deducted. 2. If fewer points are deducted within a year, by the next cycle, the points will automatically reset to zero. If a total of 12 points are accumulated, the license holder must attend a training session at the vehicle management office where the license was issued or at the location where the violation occurred. If 12 points are accumulated twice consecutively within one demerit point cycle, an additional road test (Subject Three) will be required. Only after passing both tests can the points be reset to zero; otherwise, the driver's license cannot be used normally.
19
0
Share

How to Deal with a Flooded Spark Plug in a Motorcycle?

Do not use the choke. Instead, fully open the throttle and repeatedly step on the pedal several times to expel the accumulated fuel in the cylinder. If there is excessive fuel, remove the spark plug for cleaning. Generally, there are two scenarios for a flooded spark plug: 1. The air filter and carburetor are too dirty and require cleaning. The carburetor's mixture is too rich or the fuel level is too high, leading to excessive fuel supply that cannot be completely burned and adheres to the spark plug. In this case, the exhaust pipe will emit black smoke when the engine is accelerated. 2. Severe wear of the cylinder, piston, piston rings, or valve oil seals causes oil burning. In this scenario, the exhaust pipe will emit blue smoke. Additionally, adding too much engine oil can also lead to oil burning. After oil burning, carbon deposits will form on the spark plug, causing it to flood.
7
5
Share

What to Do When There's a Crack in the Car Windshield?

If there's a crack in the glass, it is recommended to go to a professional auto glass repair shop for fixing. Relevant information: 1. Principle: Car glass is transparent, and the reason why cracks can be seen is that air enters between the cracks, causing light refraction between the air and the glass, making the cracks in the transparent glass visible. 2. Precautions: If not repaired in time, the air that seeps in during driving can expand the crack, making it larger and forming an extension of the glass. Therefore, once a crack is found in the glass, it is best to go to a professional auto glass repair shop immediately for repair.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.