How to Select the Four-Wheel Drive Mode in the Outlander?

1 Answers
Dave
07/30/25 2:38am
There is a four-wheel drive mode button located on the car's center console. Press this button to switch between four-wheel drive modes. If the vehicle encounters a slipping situation while driving, the onboard computer will automatically detect it and distribute the engine's output torque to the two front wheels.
Was this review help?
14
1
Share
More Forum Discussions

Why is there water in the car when it rains?

Possible reasons include leaks in the sunroof itself, poor sealing, or clogged/detached sunroof drainage holes preventing water from draining outside the vehicle. Below is relevant information: 1. Types of car sunroofs: Car sunroofs can be broadly categorized into: sliding-out, built-in, built-in flip-up, panoramic, and curtain styles. They are mainly installed on commercial SUVs, sedans, and other vehicle models. 2. Function of car sunroofs: Experts explain that air pollution inside vehicles seriously affects the health of drivers and passengers, especially after prolonged enclosure when harmful substances like benzene and formaldehyde from interior decorations accumulate in the cabin. Therefore, the first thing to do when entering the car after overnight parking is to open the sunroof, utilizing its superior negative-pressure ventilation principle to filter the cabin air and protect occupants' health.
7
4
Share

Where to Collect the Annual Vehicle Inspection Sticker?

You can directly collect it at the designated window of the vehicle management office by presenting your vehicle registration certificate and compulsory traffic insurance policy. Vehicles purchased after September 2010 are exempt from inspection, provided there have been no major accidents. If a major accident has occurred, the vehicle must undergo an on-site inspection. Starting from September 2014, newly purchased small non-commercial vehicles with 7 seats or less are subject to inspection every 6 years. If there are no major accidents within 6 years, the vehicle does not need to undergo an on-site inspection. Simply bring the vehicle registration certificate to the vehicle management office. Nowadays, every vehicle management office has a designated window specifically for handling exempted vehicles to collect the annual inspection sticker and environmental protection sticker. At the designated window, submit your vehicle registration certificate and compulsory traffic insurance policy to the staff. After the staff checks the records and confirms that the vehicle is exempt from inspection, they will directly issue you the annual inspection sticker and environmental protection sticker.
18
2
Share

Is LLumar film applied to glass or car body?

LLumar film is applied to glass. Here is some relevant information about LLumar film: 1. Introduction: LLumar, a window film brand under Eastman Chemical Company, was founded in the 1970s and has gained a good reputation for its advanced technology research and development, excellent production capacity, extensive global distribution, and high-quality customer service. 2. Market Development: With a history of nearly 40 years, LLumar has footprints in more than 100 countries around the world, including the United States, Germany, the United Kingdom, France, Brazil, Russia, South Korea, etc., where it has gained successful marketing experience. Since entering the Chinese market in 2001, LLumar has vigorously promoted its network construction in China. From opening its first franchise store in Shantou in 2001 to now, LLumar has more than 1,200 stores nationwide, covering nearly 40 agent networks.
9
5
Share

Should the white protective film on a new car be removed?

The white protective film on a new car should be removed. This film serves to protect the car body during transportation and can be removed when the car is delivered and starts to be used. If not removed, over time, it will become very difficult to peel off and may leave marks, affecting the car's appearance. Here is some information about the white protective film on new cars: 1. The white protective film on new cars is commonly known as shipping film. Before this, a layer of wax is applied to the car body to protect it from dust, sand, acid rain, and other damages during long-distance transportation, especially for imported cars that undergo prolonged sea transport. 2. The white film should be removed in a suitable environment. Peel off the protective film at a 135° angle to the paint surface. For easier removal, large areas of the protective film can be divided into 2-3 sections for peeling. 3. After removing the white film, the paint surface needs to be cleaned. Washing the car after removing the white film allows for another inspection of the body paint. Any marks left by the edges of the white film need to be treated.
18
3
Share

Is braking delayed or advanced when going downhill compared to on flat roads?

It is neither delayed nor advanced, but you may feel a decrease and slowdown in braking effectiveness due to gravitational acceleration. Here is some relevant information: 1. Introduction to braking distance: Braking distance is one of the most important indicators used by traffic management departments during vehicle inspections. The 100 km/h braking distance refers to the distance a vehicle travels from the moment the brakes are fully applied at a speed of 100 km/h until it comes to a complete stop with maximum braking force. Currently, there is no specific standard for the optimal braking distance, but generally, a distance within 42 meters is considered excellent, 42-45 meters is acceptable, and anything above 45 meters is considered failing. 2. Factors affecting braking distance: Generally, the more pistons a brake caliper has, the better its braking performance. Additionally, the wear on brake pads and brake discs can significantly impact braking efficiency. The vehicle's load also affects braking distance; in real-life scenarios, the more cargo a vehicle carries, the longer the braking distance tends to be.
7
2
Share

How to switch to manual transmission in Volkswagen Magotan?

To switch to manual transmission in Magotan, follow these steps: 1. First, move the gear lever to the manual transmission position (M or S gear); 2. To shift up, push the gear lever towards the '+' direction; 3. To shift down, push the gear lever towards the '-' direction. More details about Magotan are as follows: 1. Magotan is a model under FAW-Volkswagen, with body dimensions of 4866mm in length, 1832mm in width, 1464mm in height, and a wheelbase of 2812mm. 2. In terms of appearance, Magotan features a robust V-shaped front grille that exudes a steady and grand aura, along with sleek and stylish body lines, giving it a drag coefficient as low as 0.28. 3. The refined and minimalist LED taillight design embodies the perfect combination of technology and art; its waistline maintains the classic 'diamond proportion', clean and smooth.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.