How to Securely Attach the Rear Camera Inside the Car?

1 Answers
SanIvan
07/29/25 7:08pm
It is essential to clean the area where the camera will be attached thoroughly and then use 3M double-sided tape to affix it. This method ensures that the rear camera inside the car is securely attached. Rear cameras are generally of two types: one is used for providing a reverse image, and the other is used for dashcams. The reverse image camera is installed outside the car, while the dashcam camera, when installed outside, offers better clarity and functionality. Below are the functions of a dashcam: 1. Protecting the driver's legal rights: In cases of collisions with pedestrians, cyclists, or motorcyclists crossing the road, it can prevent the driver from being blackmailed and serves as effective evidence. 2. Facilitating accident liability determination: In the event of an accident, reviewing the recorded footage makes the responsibility clear, helping traffic police handle the situation quickly and accurately. It also allows for the swift removal of vehicles from the scene, aiding in traffic flow restoration while preserving crucial evidence. This contributes to a safe and smooth traffic environment and ensures fairness. 3. Acting as a deterrent to reduce accident rates: With a dashcam installed, drivers are less likely to engage in reckless driving, significantly decreasing the likelihood of accidents. Even in hit-and-run cases, the dashcam can capture the involved vehicle's details, greatly reducing such incidents. 4. Serving as evidence in claims: In cases where compensation for traffic accident damages is determined by court rulings, the dashcam can provide evidence, leading to more accurate sentencing and compensation. 5. Effectively preventing fraud: In encounters with professional scammers or road robbers, the dashcam can record the incident scene and the perpetrator's appearance, providing critical evidence for solving the case. 6. Recording life experiences: Many car owners enjoy road trips and use dashcams to document their journeys—whether smooth and scenic or rough and muddy—each experience is worth remembering.
Was this review help?
7
2
Share
More Forum Discussions

What is the engine shutdown procedure for the Audi A6 as per the manual?

The engine shutdown procedure for the Audi A6 as per the manual is: First, press and hold the brake pedal, then shift to N (neutral), engage the parking brake, press the engine stop button, shift to P (park), and finally release the brake pedal to complete the shutdown operation. The starting procedure for the Audi A6 is: Press and hold the brake pedal, shift to N or P, then press the start button to ignite the engine. The Audi A6 is a luxury vehicle produced by Audi, available in both sedan and station wagon variants. The vehicle dimensions are 4940mm in length, 1890mm in width, and 1470mm in height, with a wheelbase of 2924mm. It is equipped with a multitronic continuously variable manual transmission.
7
1
Share

Why does the car start to shake when driving at 120 km/h on the highway?

When the car reaches 120 km/h, it is in a high-speed driving state. The shaking that occurs at this speed can be analyzed from the following two dimensions: 1. The vibration gradually intensifies as the speed increases. 2. When vibration occurs at a certain high speed and causes the steering wheel to shake, first lift the drive axle, place safety blocks in front of the front wheels, start the engine, and gradually shift into higher gears to bring the drive wheels to the final test vibration speed. 3. If both the body and the steering wheel shake at this point, the vibration is caused by the drivetrain, as the front wheels and axle are stationary at this time. If the car does not shake at the final test vibration speed, the cause of the vibration lies in the front axle, and further diagnosis and troubleshooting are required.
18
1
Share

Is Windshield Tinting Necessary?

Yes, here are the benefits of applying window film: 1. Heat and Sun Protection: The film can block heat generated by infrared rays. 2. UV Protection: Medium and long waves of ultraviolet rays can penetrate thick glass, but applying heat-insulating film can block most UV rays. 3. Safety and Explosion Prevention: The base layer of the film is made of polyester, which is highly resistant to tearing and penetration. Combined with the adhesive layer, the film enhances the glass's strength, preventing injuries from accidental glass breakage. 4. Creating a Private Space: By choosing the appropriate type, the film ensures that the interior of the car is not visible from the outside while maintaining clear visibility from inside, preserving privacy and safety. 5. Reducing Air Conditioning Consumption: Applying heat-insulating film compensates for the loss of air conditioning cooling capacity, instantly lowering the interior temperature and achieving a certain degree of fuel savings.
16
0
Share

What is the reason why a diesel car won't start after running out of fuel and refueling?

Here are the specific reasons why a diesel car won't start after running out of fuel and refueling: 1. Electrical circuit failure: It may be due to low-voltage power interruption during driving, causing the engine to stall. 2. Electrical component failure: Usually caused by faults in the ignition coil, capacitor, or electronic ignition module. The symptom is that the engine can start initially but stalls after a while. 3. Fuel system failure: Damage to the fuel pump, fuel line rupture, clogged carburetor fuel inlet, or empty fuel tank. 4. Sensor failure: Faults in the throttle position sensor, intake air flow sensor, intake pressure sensor, crankshaft position sensor, camshaft position sensor, etc. If these sensors malfunction, it can also cause the engine to stall. 5. Other failures: Engine timing system disorder. Incorrect timing system calibration or engine valve issues.
4
2
Share

What Tire Pressure is Considered Low?

According to the international GBT2978-2008 standard, the normal tire pressure for standard tires is 2.4-2.5bar, and anything below 2.4bar is considered low tire pressure. Normal tire pressure reference standards: As per the international GBT2978-2008 standard, reinforced tires should have a pressure of around 2.8-2.9bar, with the maximum pressure not exceeding 3.5bar. Tire pressure can also be affected by seasonal factors, vehicle load, and road conditions. Daily tire pressure considerations: Most vehicles are equipped with a tire pressure monitoring system that alerts drivers to leaks or abnormal tire pressure to ensure driving safety. It's important to regularly check the tire pressure warning light on the dashboard, as both excessively low and high tire pressure can affect driving performance and increase tire wear.
8
5
Share

What documents are required for motorcycle registration?

Motorcycle registration requires the purchaser's ID card, purchase invoice, certificate of conformity, and vehicle consistency certificate. Regulations: Unregistered motorcycles cannot be directly ridden to the vehicle management office. Riding an unregistered motorcycle on the road is illegal and may result in fines or vehicle impoundment. Registration process: After purchasing the motorcycle, take the invoice provided by the dealer to the Motor Vehicle Market Management Office under the Municipal Administration for Industry and Commerce to complete the verification procedure. After passing the vehicle inspection, the on-site police officer will fill out and sign the motor vehicle registration form. Then pay the purchase tax, receive the license plate upon approval, and finally go to the local road maintenance fee collection office to pay the road maintenance fee.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.