How to Screw on a License Plate?

What does a 'dead file car' mean for new cars?

Dead file car refers to a type of vehicle that cannot be transferred but can be driven normally. A dead file car is one that cannot undergo ownership transfer, and its license plate remains valid until the car is scrapped. It can also undergo regular vehicle inspections. These cars are typically smuggled vehicles purchased in the past, which were then registered with the approval of the vehicle management office leadership. All the paperwork is genuine, and the vehicle management office acknowledges it, but there is no record in the archives except for the leadership's approval for registration. Therefore, such cars can only be driven locally and cannot be transferred or re-registered elsewhere. Additional information: 1. There are many possible reasons for a dead file car, such as the inability to locate the original owner or debt disputes. Small-scale import procedures also fall under the category of dead file cars (small-scale imported cars cannot be transferred out of the city and can only undergo local ownership transfer). 2. It is best not to purchase a dead file car as it offers fewer protections.

18

4

Share

Where to Obtain the Motor Vehicle Inspection Compliance Sticker?

To obtain the motor vehicle inspection compliance sticker, you need to bring the vehicle registration certificate, compulsory traffic insurance policy, and ID card to the local vehicle management office or traffic police station for free collection. The procedure for obtaining the motor vehicle inspection compliance sticker is as follows: 1. For vehicles exempt from inspection within 6 years (provided no major accidents have occurred), no on-site inspection is required; however, every two years, you must visit the vehicle management office to collect the annual inspection sticker and green environmental protection sticker. When it's time for inspection, bring your ID card, vehicle registration certificate, and the current valid compulsory traffic insurance policy to the vehicle management office. 2. Upon arrival at the vehicle management office, go to the designated window and submit the documents to the staff; after the staff enters the information, you can proceed to the next window to directly collect the annual inspection sticker and environmental protection sticker.

17

0

Share

What is the normal tire pressure for SUV vehicles?

The tire pressure for SUV tires is typically between 2.2-2.5 bar. Both overinflation and underinflation can have negative effects. For specific details, please refer to the vehicle's manual. Tire pressure is an indicator of a vehicle's load capacity. The load capacity depends on the level of tire pressure. According to the relationship between the tire's load index, pressure, and load capacity, higher tire pressure increases load capacity, while lower pressure reduces it. Overinflated tires are more prone to blowouts, especially during high-speed driving in summer. It can also increase vehicle jolts, affecting driving comfort and safety. The tire's contact area with the ground decreases, accelerating wear in the middle of the tire. Reduced grip can lead to skidding and longer braking distances. Underinflated tires increase contact with the ground, causing overheating, accelerating rubber aging and wear, increasing rolling resistance, reducing the vehicle's top speed, and increasing fuel consumption. Drivers should adjust tire pressure according to external environmental temperatures and driving conditions. In summer, high temperatures can cause tires to heat up, and high pressure increases the risk of blowouts, so pressure should be slightly lower. In winter, tire pressure should be slightly higher than in summer. On smooth roads, maintain normal tire pressure. On unpaved roads, reducing tire pressure ensures better grip and helps avoid punctures from sharp objects.

12

0

Share

What are the symptoms of a faulty Passat sensor?

If the oxygen sensor of a Volkswagen Passat fails, the computer of the electronic fuel injection system will not receive information about the oxygen concentration in the exhaust pipe, thus unable to perform feedback control on the air-fuel ratio. This will lead to increased engine fuel consumption and exhaust pollution, as well as engine issues such as unstable idling, misfiring, and surging. Therefore, it is essential to promptly address the fault or replace the sensor. Below are relevant details: 1. Oxygen sensor poisoning: Oxygen sensor poisoning is a common and difficult-to-prevent fault, especially for vehicles frequently using leaded gasoline. Even a new oxygen sensor may only function for a few thousand kilometers. If the lead poisoning is mild, using a tank of unleaded gasoline can remove the lead from the sensor's surface and restore normal operation. However, excessively high exhaust temperatures often cause lead to penetrate the sensor's interior, obstructing oxygen ion diffusion and rendering the sensor ineffective, necessitating replacement. 2. Silicon poisoning: Silicon poisoning of the oxygen sensor is also common. Generally, silicon dioxide generated from the combustion of silicon compounds in gasoline and lubricants, as well as organic silicon gases improperly emitted from silicone rubber gaskets, can cause the oxygen sensor to fail. Therefore, it is crucial to use high-quality fuel and lubricants.

9

0

Share

What are the reasons why the Aumark suddenly fails to start?

Foton Aumark S3 may fail to start due to the engine being locked or a lack of power. If there's no power and the vehicle won't start, listen for the sound of the starter motor when turning the key. If there's no sound, the issue may be with the starter motor. If there's a starting sound but the engine doesn't start, the problem could be with the engine's electrical circuit, such as the distributor wires. Generally, a car's failure to start may be due to the following reasons: 1. Identifying the fault cause: For diagnosing faults like the engine not starting, the first step is to check the battery. It's essential to determine whether the engine's failure to start is due to insufficient battery power. 2. Checking ignition timing: A slipping timing belt is a fundamental reason for the absence of an electric spark, leading to the engine's failure to start. 3. Inspecting the starting system: For issues like the engine not starting, the first task is to examine the electrical circuits in the engine's starting system. At its most basic, the starting system's circuit includes components like the battery, starter motor, and the cables connecting these parts. 4. Assessing spark quality: Once the starting system's circuits are confirmed to be fault-free, attention should shift to why the engine isn't running. Typically, the first check is the engine's ignition system, which is also the simplest inspection task.

12

1

Share

Are There 8-Seater Business Vehicles?

Eight-seater business vehicles are typically large models, including the Vito, Wuling Hongguang PLUS, Lingzhi, and SAIC Maxus G10. Below are more detailed introductions: 1. Vito: The Mercedes-Benz Vito is an excellent choice for business receptions, offering 7, 8, and 9-seat configurations. Even passengers in the last row can enjoy a comfortable seating position thanks to its spacious interior. The exterior, accentuated by the Mercedes three-pointed star emblem, exudes a commanding and mysterious presence, rivaling even the million-dollar Toyota Alphard. Designed primarily for business receptions, this model is equipped with a 2.0T engine. While it may not satisfy those seeking high-performance driving, comfort is its primary design focus, making the Mercedes-Benz Vito a highly capable vehicle. 2. Wuling Hongguang PLUS: The Wuling Hongguang PLUS is a compact MPV, often referred to as the Chinese Beetle. It is a practical vehicle for the masses and a reliable partner for many in their entrepreneurial journeys. Wuling understands the vehicle's primary use—hauling goods, often overloaded—so it comes with a close-ratio transmission that provides excellent low-speed torque. Although the dashboard materials are basic, the design is thoughtful and somewhat surprising. The spacious interior is a given for a vehicle renowned for its cargo-hauling capabilities. 3. Lingzhi: The Lingzhi is a mid-sized MPV under Dongfeng Fengxing. Its rounded and full-bodied exterior gives it a dignified appearance suitable for simple business receptions. The interior features a bright and warm color scheme, offering a spacious and comfortable cabin. Interestingly, the second-row seats can rotate, bringing passengers closer together for work or entertainment, aligning perfectly with its business reception positioning. The 1.6L engine meets daily driving needs, with an official fuel consumption of just 7.9L per 100km, making it a cost-effective choice. 4. SAIC Maxus G10: The G10 has long been marketed as an "MPV for both family and business use." Its primary customers include enterprises, institutions, and rental companies, and it is a common sight in Shanghai's premium car service market. The dashboard layout remains largely unchanged, but the addition of a large LCD touchscreen enhances the cabin's premium feel compared to its peers. Overall, the G10 offers great value for money.

12

3

Share

How to Screw on a License Plate?

What does a 'dead file car' mean for new cars?

Where to Obtain the Motor Vehicle Inspection Compliance Sticker?

What is the normal tire pressure for SUV vehicles?

What are the symptoms of a faulty Passat sensor?

What are the reasons why the Aumark suddenly fails to start?

Are There 8-Seater Business Vehicles?

What is the average fuel consumption of the Tiguan 1.8t?

Do New Cars Need Windshield Washer Fluid?

Is the tire of the Mercedes-Benz A200L a run-flat tire?

Is it necessary to warm up the car when the temperature is above 0 degrees Celsius?