How to Scrap a Lost Vehicle?

1 Answers
Robinson
07/29/25 1:07pm
The vehicle owner must present their identity proof, vehicle registration certificate, vehicle license, and fill out the 'Application Form for Vehicle Suspension, Resumption/De-registration'. For vehicles that have not reached the mandatory scrapping age, verification must be conducted by the vehicle inspection department. The vehicle owner should choose a qualified recycling company to dismantle the vehicle, holding the 'Notification'. The 'Change Form', 'XX Province Vehicle Renewal Technical Appraisal Form', 'Scrapped Vehicle Recycling Certificate', and dismantling photos must be verified and signed by the vehicle inspection department.
Was this review help?
18
2
Share
More Forum Discussions

Where is the starter fuse located in the new Santana?

New Santana starter fuse is located below the engine exhaust manifold. Open the hood, face the engine, and look at the lower part near the engine block on the left side. Method to locate the starter fuse: Turn off the power and engage the handbrake. Pull the hood release switch located in the driver's footwell to open the hood. After locating the fuse box, open it and find the starter fuse according to the text labels on it. Precautions for replacing car fuses: Replace the fuse strictly according to the rated current value indicated on the fuse box cover. Do not use a fuse with a higher rated current than specified. If the new fuse blows immediately, it indicates a possible fault in the circuit system, which should be repaired as soon as possible. In case of no spare fuse, during emergencies, you may temporarily replace it with a fuse from other non-essential equipment that doesn't affect driving or safety. If a fuse with the same current load cannot be found, you may use one with a lower rated current than the original fuse as a substitute.
18
1
Share

Where is the fuse box of the Geely Xingyue?

There are two fuse boxes in the Geely Xingyue. The interior fuse box is located behind the glove compartment on the passenger side, while the engine fuse box is situated in the engine compartment next to the battery. The function of the fuse boxes: The interior fuse box manages the electrical appliances inside the vehicle, such as power windows, airbags, electric seats, cigarette lighters, etc. The engine fuse box is responsible for the fuses of external electrical appliances, including the engine control unit, horn, windshield washer, ABS, headlights, etc. Introduction to fuses in the fuse box: Automotive fuses are a type of current fuse. When the circuit current exceeds twice the rated current of the fuse, it will melt within seconds to protect the circuit. Always replace fuses according to the rated current value indicated on the fuse box cover, and never use a fuse with a higher rated current than specified.
18
2
Share

What are the symptoms of a dirty air filter?

The symptoms of a dirty air filter are: 1. Insufficient air intake, leading to lack of power; 2. Inadequate oxygen supply, causing incomplete combustion, resulting in black smoke emission, excessive carbon deposits in the cylinders, and darkened engine oil. The replacement method for an air filter is: 1. Remove the damping rods on both sides of the glove box; 2. Take off the glove box to reveal a black rectangular cover, pry it open and remove the clips; 3. Take out the old air filter; 4. Install the new filter element. The functions of an air filter are: 1. Ensuring the air conditioning filter fits tightly against the housing to prevent unfiltered air from entering the cabin; 2. Separating dust, pollen, and solid particles from the air; 3. Absorbing moisture, soot, ozone, odors, carbon oxides, SO2, and CO2 from the air, with strong and lasting moisture absorption capabilities; 4. Preventing car windows from fogging up, ensuring clear visibility for the driver and safe driving; 5. Maintaining clean air in the passenger compartment to prevent bacterial growth.
7
0
Share

Should Waterlogged Headlights Be Replaced or Repaired?

When headlights become waterlogged, it is best to replace them entirely and ensure proper sealing. Related information: 1. Introduction: Automobile lights are various traffic lights installed on vehicles to ensure safe driving. They are divided into two categories: lighting lamps and signal lamps. Lighting lamps should provide good illumination while minimizing glare. 2. Expansion: For headlights, to balance these two requirements, high beam and low beam operating modes are adopted. High beam is used for long-distance illumination when there are no oncoming vehicles or when not following other cars, produced by the more powerful main filament located at the reflector's focal point, with an approximately horizontal beam direction.
4
0
Share

What Are the Impacts of a Flooded Car?

Impacts of a flooded car: 1. It can damage the electronic control systems inside the car, such as the engine ECU, ABS system, SRS system, GPS navigation, etc., causing poor contact in circuits or even short circuits and burnout; 2. After the car is flooded, never attempt to start or turn the engine, as this can cause severe deformation of the engine connecting rod. Therefore, the car should be towed to a repair shop as soon as possible for disassembly and cleaning; 3. The hazards of a water-damaged car are significant. If a vehicle is submerged in water, it can easily lead to rusting of body components, shortened lifespan, and reduced safety performance. Overnight heavy rain or parking in low-lying areas can cause a car to be flooded. There are three different levels of water damage: 1. If the water level exceeds the car's chassis, it is considered a water-damaged car; 2. If the water level exceeds the oil dipstick, it is a semi-flooded car; 3. If the water level has exceeded the engine hood or the dashboard panel, it is a fully flooded car.
19
0
Share

Where is the car hood located?

The hood is positioned at the front of the car, above the engine compartment. For cars with mid-engine or rear-engine configurations, the hood is located at the rear of the vehicle. Additionally, some cars with front-mid-engine setups also have their hoods at the front. The functions of the hood include: 1. Airflow guidance; 2. Protection for the engine and surrounding pipeline components; 3. Assisting driver visibility by adjusting the direction of reflected light; 4. Preventing accidents; 5. Isolating heat generated during engine operation. The hood is made of rubber foam and aluminum foil materials, which help reduce engine noise while simultaneously isolating the heat produced during engine operation, effectively protecting the paint surface on the hood and preventing aging.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.