How to Schedule a Full-Score Driver's License Education?

What is the difference between front and rear brake pads?

The biggest difference between front and rear brake discs is that the front brake discs are larger. This is because when a car brakes, whether it's front-wheel drive or rear-wheel drive, the center of gravity shifts significantly forward, causing the front wheels to bear more pressure. This is precisely why front brake discs are larger than rear ones. Below are some brake maintenance tips: 1. Protection: Use high-temperature protection to prevent corrosion in the brake system, avoid brake pads seizing due to high temperatures, and eliminate brake squealing. 2. Cleaning: Clean oil stains, dirt, and friction dust from brake discs, brake drums, and any other components to ensure good heat dissipation of the brake discs.

14

0

Share

Reasons for Excessive Vibration When the Car Air Conditioner is On?

Reasons for excessive vibration when the car air conditioner is on are as follows: 1. Engine misfire: An engine misfire mainly refers to one or more cylinders not functioning properly, typically manifested as: intermittent exhaust gas flow, severe shaking of the exhaust pipe, noticeable engine vibration, and sometimes accompanied by a sputtering sound. This is often related to ignition coil failure. 2. Worn or loose engine mounts: Engine mounts are rubber blocks placed between the engine and the car frame. Their purpose is to reduce vibration and cushion the engine's operation while also securing the engine in place. Once these mounts become worn or loose, the engine's vibration will become significantly worse. Replacing the engine mounts can greatly reduce this effect.

12

2

Share

What is the recommended tire pressure for motorcycle tubeless tires?

The recommended tire pressure for motorcycle tubeless tires should be: 2.2/2.5 bar. According to international standards: As per the international GBT2978-2008 standard regulations and requirements: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: Should not exceed 3.5 bar. Introduction to tire pressure: Tire pressure, strictly speaking, refers to the air pressure inside the tire. In automotive maintenance, the engine is the heart of a car - engine damage means the end of a vehicle's life. Similarly, tire pressure is like a car's blood pressure; the level of tire pressure plays a crucial role in the vehicle's performance and power.

17

2

Share

Why is the car air conditioner not blowing strong air?

Here are the reasons why the car air conditioner is not blowing strong air: 1. Adjustment issue: When the air volume is small, the first thing to check is the current mode of the air conditioner and the fan speed setting. If it's set to medium or low speed, it might simply be a case of incorrect adjustment. 2. Temperature reason: Check the current temperature, as most air conditioners are designed to automatically switch to a lower fan speed when the temperature is too low. Therefore, if the temperature is too low, it won't be possible to increase the fan speed. 3. Air conditioner blockage: Check if the air filter is severely clogged with dirt and dust, which can obstruct the airflow. A dirty air filter not only affects the air volume but also the cooling efficiency.

3

0

Share

Can a car engine withstand running continuously for 12 hours?

It is normal for a car to sustain some damage when running continuously for 12 hours. Here are the potential damages caused by prolonged continuous driving: 1. Engine oil leakage: If a car runs continuously for over 1000 kilometers, the engine will be in a high-temperature state. If there's any oil leakage at this time, it can easily lead to spontaneous combustion. 2. Affects engine output: Long-term high-speed driving can cause an issue where the exhaust temperature rises. If the car's exhaust temperature increases, it may affect the ECU, potentially triggering the system's over-temperature protection, which would reduce engine output.

9

5

Share

Do You Need to Release the Throttle When Shifting Gears in a Manual Transmission?

When shifting gears in a manual transmission, you need to release the throttle. Only CVT transmissions can truly achieve shifting without releasing the throttle. Shift gears according to the car's speed: Generally, start in first gear, then shift to second gear after driving a few meters; shift to third gear when the speed reaches above 20 mph but below 35 mph; shift to fourth gear when the speed reaches above 35 mph but below 45 mph; shift to fifth gear when the speed exceeds 45 mph. Coordination between clutch and throttle during shifting: When shifting gears, the clutch and throttle must be well-coordinated. Press the clutch pedal all the way down while simultaneously releasing the throttle pedal, then quickly shift to the corresponding gear.

3

1

Share

How to Schedule a Full-Score Driver's License Education?

What is the difference between front and rear brake pads?

Reasons for Excessive Vibration When the Car Air Conditioner is On?

What is the recommended tire pressure for motorcycle tubeless tires?

Why is the car air conditioner not blowing strong air?

Can a car engine withstand running continuously for 12 hours?

Do You Need to Release the Throttle When Shifting Gears in a Manual Transmission?

What causes a car to start and then stall quickly without being able to accelerate?

Why Has the Estimated Driving Range Suddenly Decreased?

Where Can I Find Low-Cost Disposal of Stock Vehicles?

What is the VW50200 Standard?