How to Save Yourself When a Car Falls into Water?

3 Answers
LeKate
07/29/25 6:18pm
First, do not rush to open the car door or break the window, as this will cause water to rush in and lead to drowning. When the car has just fallen into the water, there is still some air inside. Stay calm and ensure that you open the door or window in one go to escape from the car.
Was this review help?
5
0
Share
Melo
08/14/25 10:54am
When a car falls into water, quick action is crucial. I've heard many people say the first thing to do is to unbuckle the seatbelt, which is correct because water pressure may prevent the door from opening. Immediately after, try to open the window or door. If the electronic systems fail, use manual methods, such as pushing the door hard or hitting the window edge with your fist. I recommend not rushing to open the door when the car starts taking in water. Wait until the water reaches about half the window level—when the internal and external pressures balance—it will be much easier to open. Staying calm is vital; take a few deep breaths to avoid panic. Once you can open the door or window, swim out immediately without delay. After escaping, swim to the surface as quickly as possible and move away from the car to call for help. Don’t forget to keep a safety hammer or rescue hammer in the car for emergencies. For prevention, slow down when driving over bridges or near water on rainy days, and keep the windows closed to prevent accidents.
Was this review help?
20
4
Share
Expand All
Terri
10/14/25 5:17am
I personally experienced such a dangerous situation when my car skidded on a wet road in the rain and plunged into a pond. My heart was racing at that moment, but safety tips flashed through my mind: unbuckle the seatbelt without hesitation. Water quickly rushed in, and the door wouldn't open, so I immediately tried to roll down the window. After a frantic struggle, I finally managed to push it open a crack. When the water level reached the middle of the window, the pressure equalized, and I could easily push the door open to escape. After swimming ashore, soaked to the bone, I called for help from passersby to get rescued. The lesson I learned afterward is that watching more escape videos in daily life can save lives in critical moments. Speed control is also crucial—driving slowly on slippery roads can prevent accidents. Remember, once submerged, don't think about grabbing your phone or belongings; survival comes first—act quickly. After escaping, call for help immediately to avoid secondary dangers.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

What is the adjustment method for a hydraulic clutch?

Hydraulic clutches cannot be adjusted for height. A high hydraulic clutch position indicates severe wear of the clutch three-piece set, resulting in excessive free travel of the clutch. This requires replacing the clutch disc, driven plate, and release bearing. Solutions for a heavy hydraulic clutch include: 1. The clutch operating mechanism's mechanical part is stuck: The clutch master cylinder lacks hydraulic oil or has a leak; replace the clutch or add clutch fluid. 2. The clutch slave cylinder is rusted: The clutch booster cylinder's air passage is blocked or the cylinder is leaking air; replace the clutch slave cylinder. 3. The clutch release fork is broken or bent: The release bearing or bearing seat has fallen off. Replace the clutch release bearing.
4
0
Share

What lights should be used when passing through an intersection at night?

When passing through a signalized intersection at night, low beam headlights should be used. Here are the specific details: 1. Passing through intersections at night. If passing through an intersection without traffic signals, it is necessary to alternate between high and low beam headlights when approaching the intersection to alert vehicles and pedestrians in the perpendicular direction. Additionally, speed should be reduced when nearing the intersection to prevent sudden incidents, allowing sufficient time to respond. 2. Use of lights at night. When driving on well-lit roads, low beam headlights should be used, and they should also be used when following another vehicle to make it easier for the preceding vehicle to observe the situation behind through the rearview mirror. If meeting an oncoming vehicle at a distance of 150 meters, high beams should be switched to low beams. Furthermore, when driving at night and encountering slopes, arched bridges, crosswalks, sharp curves, or when overtaking another vehicle, it is necessary to alternate between high and low beam headlights.
5
1
Share

Reasons for the Vehicle Not Accelerating When the Throttle is Increased

About the reasons for the vehicle not accelerating when the throttle is increased are introduced as follows: 1. Insufficient engine torque. (1) Engine misfire: The ignition coil of a certain cylinder is damaged, causing the engine to change from 4 cylinders to 3 cylinders. At this time, the fuel efficiency of the engine is very low, and the output torque value of the engine is small. (2) Problem with the engine fuel pump: The engine fuel pump is damaged, leading to insufficient fuel supply from the engine, resulting in weak acceleration. (3) Problem with valve timing: To improve the fuel efficiency of the engine, modern engines use a CVVD valve timing system. However, if the CVVD hydraulic control system is damaged or the sealing ring leaks oil, it will also reduce the engine's fuel efficiency, leading to poor engine output torque. 2. Damage to the vehicle's transmission. The vehicle's transmission experiences slipping and wear, and the power output from the engine cannot be transmitted to the vehicle's tires, causing the vehicle speed to not increase. If the clutch friction plate is excessively worn, causing the clutch temperature to rise very easily, it will also make the input and output ends of the clutch very prone to slipping. The engine's power cannot be fully transmitted to the transmission, resulting in the vehicle's inability to accelerate.
7
5
Share

Does the throttle control air intake or fuel intake?

Throttle controls air intake, here are the details: 1. The throttle controls the air intake through the throttle valve. After the air intake is determined, the engine computer will decide how much fuel to inject based on this air intake. The throttle valve helps achieve the optimal air-fuel ratio, ensuring complete combustion of gasoline and maximizing energy utilization for power generation. 2. Introduction to gasoline engines. Gasoline engines rely on spark plugs to ignite the fuel. The air and gasoline form a mixture that enters the cylinder. When the piston approaches the top dead center, the spark plug ignites the mixture, and the flame spreads outward from the spark plug until complete combustion occurs. This process requires a certain amount of time.
6
2
Share

What is the fuel consumption of the Fengjun 5?

Fengjun 5 fuel consumption is 9.9L/100KM, here is the relevant information: 1. Vehicle positioning: Fengjun 5 is a pickup truck under Great Wall, with dimensions of 5095mm in length, 1800mm in width, and 1740mm in height, a wheelbase of 3050mm, and a front-engine, rear-wheel-drive layout. 2. Power: It uses a 2.4L naturally aspirated engine with a maximum torque of 230 N·m, paired with a 5-speed manual transmission. 3. Suspension type: The front suspension is double-wishbone independent suspension, the rear suspension is leaf spring non-independent suspension, and the tire specification is 235/70R16.
8
2
Share

How Long Does the BYD Qin Battery Last?

BYD Qin's battery lifespan ranges between 5 to 8 years. There are primarily two types of batteries for the BYD Qin models available in the market: those produced after 2018 use ternary lithium batteries, while models before 2018 are equipped with lithium iron phosphate batteries. BYD is a Chinese automotive brand established in 1995, specializing in the production of commercial and family sedans, as well as batteries. Starting with a team of just over 20 people, BYD grew to become the world's second-largest rechargeable battery manufacturer by 2003, the same year it ventured into automobile manufacturing. In the passenger vehicle market, BYD operates in both the traditional fuel-powered and new energy vehicle sectors. Since launching the world's first mass-produced plug-in dual-mode electric vehicle in 2008, BYD has introduced a series of new energy models, including the e6, Qin, Tang, Song, Yuan, Han, and Dolphin. The BYD Qin is a high-performance sedan independently developed by BYD Co., Ltd., featuring the second-generation DM technology that allows switching between pure electric and hybrid electric modes. Its body dimensions are 4740mm in length, 1770mm in width, and 1480mm in height.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.