How to Save Money When Driving Home for Chinese New Year?

Can I Register a Car Bought in Another City with My Hometown License Plate?

It is possible to register a car bought in another city with your hometown license plate. According to national regulations, as long as the vehicle has proper invoices, certificates, purchase tax, and compulsory traffic insurance, any vehicle purchased from a legitimate auto market nationwide can be registered in your hometown. Before purchasing a car, make sure the vehicle has proper invoices and certificates, especially the so-called "big book" (vehicle certificate). For used cars, pay extra attention to this. For new cars, you can purchase basic insurance like compulsory traffic insurance in your hometown using the VIN (even if you're not there, you can ask relatives or friends to handle it). For used cars, check if the insurance is still valid—if it has expired, the car cannot be driven legally, and you won't be able to register it in your hometown. Additionally, when buying a car in another city, besides the purchase invoice, you need to prepare documents such as the vehicle certificate, warranty card, manual, three-guarantee certificate, and vehicle purchase tax declaration form to complete the purchase tax process back in your hometown. Vehicle Registration Process at the DMV: 1. **Photography**: The photographer will set up a number plate based on the last four digits of the VIN, place it at the lower right corner of the windshield, and take a photo of the car. 2. **Rubbing**: This step is usually done in the DMV inspection area. Ensure you have enough copies—two for the engine number and three for the VIN. 3. **Inspection**: All domestic brand vehicles are exempt from inspection. Non-exempt vehicles must undergo testing, including checks for power, lights, emissions, and brakes. 4. **Criminal Investigation**: After obtaining the engine and VIN rubbings, fill out the criminal investigation form at the inspection office. 5. **Vehicle Inspection**: Submit the prepared documents to the on-site officer in the inspection area. 6. **Obtaining the Vehicle License and Registration Certificate**: After selecting a license plate number, the staff will print a license collection voucher and request payment. 7. **Paying Vehicle and Vessel Tax**: After receiving the vehicle license and registration certificate, make copies and pay the annual tax at the DMV. 8. **License Plate Installation**: Take the vehicle license and registration certificate to the inspection area, where a worker will retrieve and install the reflective plates. 9. **Receiving the Green Eco Label**: Bring the required documents (for private cars: original vehicle license, registration certificate, and owner's ID; for company cars: original vehicle license, registration certificate, and business license) to receive the label for free.

17

4

Share

What Causes the Engine Warning Light to Illuminate in a Santana?

There are primarily 7 reasons for the engine warning light to illuminate: Sensor malfunction: The sensors referred to here include those for coolant temperature, crankshaft position, air flow, intake air temperature, oxygen, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, which will trigger the engine warning light. Fuel quality issues: Failure to add fuel and engine oil as required by the manufacturer may cause engine wear, leading to the illumination of the warning light. Poor combustion of the air-fuel mixture: Poor combustion can lead to engine carbon deposits or knocking. Once detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can all cause poor combustion of the air-fuel mixture. Turbocharging issues: The intake turbocharging pipeline and turbocharger can also cause the engine warning light to illuminate. The most common issue is a damaged turbocharger, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust pipe. Intake issues: If the vehicle's intake system encounters problems, it may lead to clogged engine pipelines, and in severe cases, trigger the engine warning light. A dirty air filter that hasn't been cleaned regularly can cause intake problems. Exhaust issues: Exhaust faults can also cause the engine warning light to illuminate. Common causes include faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, and bearings, with the catalytic converter being the most frequent issue. Using leaded gasoline, lead or silicon-based lubricant additives, physical damage to the catalytic converter, or faults in the engine fuel supply system can easily lead to catalytic converter failure. Anti-theft system malfunction: If the vehicle's electronic anti-theft system malfunctions, or if the anti-theft controller does not match the engine electronic controller, the anti-theft system can prevent the engine from operating normally, while also illuminating the engine warning light. If the engine warning light is on, follow these steps: First, check whether the engine is running normally, such as whether there is shaking, black smoke, etc. If so, try not to start the engine again. Particularly, do not start the engine if the red warning light is on. If the engine can be started, turn it off for 5-10 minutes, then without pressing the brake, press the start button once or turn the key halfway to the "on" position without depressing the clutch. The vehicle will perform a self-check after powering on. Wait for 5-10 seconds to observe whether the warning light on the dashboard turns off. If the warning light does not turn off, visit a service station as soon as possible to identify the cause. The service station can use a portable diagnostic tool to read the fault codes, obtain fault information, and perform targeted repairs.

8

4

Share

Under what circumstances will a vehicle alarm sound?

Vehicle alarms will sound in cases of external force knocking, violent smashing, door lifting, unauthorized entry into the vehicle without deactivating the security system, firecracker explosions, or vibrations caused by large vehicles passing by. Below is a detailed introduction to car alarms: Concept: A car alarm is a warning device installed in vehicles. Based on the intensity of vibrations, the controller will emit warning sounds or trigger a full alarm to promptly alert the vehicle owner. Common causes for continuous alarm: If a car alarm keeps sounding, it is most likely due to the anti-theft device's sensitivity being set too high, causing the alarm to trigger even with minor vibrations.

20

3

Share

Is it necessary to repair the car's side sill?

The car's side sill should be repaired when severely dented. Here are specific details about the car frame: 1. Function: The car frame is typically made of high-strength steel plates, primarily connected by riveting crossbeams and longitudinal beams to form a rigid structure with sufficient strength and stiffness to bear the vehicle's load and impacts from the wheels. 2. Deformation: If there is severe deformation or wrinkling, replacement is necessary. Since the frame's longitudinal and crossbeams are mostly welded together, deformation requires cutting and welding new components onto the deformed frame.

12

3

Share

What is the wheelbase of the Baojun 310w?

The wheelbase of the Baojun 310 is 2750mm. Detailed specifications are as follows: 1. Body dimensions: Length/width/height are 4032/1680/1470mm. The Baojun 310 does not sacrifice space in pursuit of a stylish and refined design and agile driving control. 2. The 1.2-liter naturally aspirated engine delivers a maximum power of 60.3kw and a maximum torque of 116 Nm. The engine can output maximum power at 5600 rpm and maximum torque between 3600 and 4000 rpm.

6

3

Share

What is the vehicle wading depth?

Vehicle wading depth generally does not exceed 20 centimeters. Below are precautions for driving through waterlogged sections: Assess water depth: It's necessary to evaluate the water depth. If the water level doesn't exceed half the wheel height, it's safe to proceed; otherwise, continuing is not recommended. Use snow mode: After entering a waterlogged section, reduce speed and drive slowly. For automatic transmission vehicles, use first gear if possible, preferably engaging snow mode to prevent wheel slippage. Continuous braking: After exiting the waterlogged section, apply the brakes several times consecutively to evaporate moisture from the brake discs, thereby avoiding impact on the vehicle's braking performance.

4

Share

How to Save Money When Driving Home for Chinese New Year?

Can I Register a Car Bought in Another City with My Hometown License Plate?

What Causes the Engine Warning Light to Illuminate in a Santana?

Under what circumstances will a vehicle alarm sound?

Is it necessary to repair the car's side sill?

What is the wheelbase of the Baojun 310w?

What is the vehicle wading depth?

How to Replace the Battery in a Cruze Car Key?

How long does it take for the Audi Q8 to accelerate from 0 to 100 km/h?

What are the symptoms of insufficient engine cylinder pressure?

Where is the Mazda CX-5 rearview mirror heating button located?