How to Save Fuel for a Tiida with High Fuel Consumption?

1 Answers
BriellaDella
07/30/25 4:03am
You can refer to the following points to save fuel: 1. Reduce the vehicle weight as much as possible: Keep the interior simple and avoid placing unnecessary items. Statistics show that every 1kg increase in vehicle load will increase fuel consumption by 1%. 2. Avoid excessive vehicle modifications: Adding spoilers, protective covers, or rear wings can disrupt the original aerodynamic design of the vehicle, increasing wind resistance and consuming extra fuel. Modifying lights will also increase electrical usage, leading to unnecessary fuel consumption. 3. Replace worn-out parts promptly: Clean engine carbon deposits, check the oxygen sensor and electronic control unit, and regularly replace the three filters to improve the engine's working environment and reduce fuel consumption. 4. Develop good driving habits: While driving, avoid sudden acceleration, high-speed driving in low gears, prolonged idling, frequent lane changes, or braking. Aim for smooth starts, steady-speed driving, and reduced braking. 5. Choose the right engine oil: Keeping the engine well-lubricated can reduce carbon deposits on the cylinder walls and piston surfaces, thereby lowering fuel consumption.
Was this review help?
20
4
Share
More Forum Discussions

What is the installation method for motor vehicle license plates?

The installation method for motor vehicle license plates is as follows: 1. Prepare the required license plate accessories and a screwdriver; 2. Align the license plate with the vehicle's fixing points and support it by hand to prevent misalignment; 3. Use the screwdriver to tighten all four fixing points with the fixing screw components, ensuring no points are left unfastened; 4. Adjust the license plate to the appropriate position and press the cap into place to secure it. When hanging the vehicle license plate, special sealing devices, namely screw caps, must be used. These seals are printed with Chinese characters representing the province, autonomous region, or municipality directly under the central government, as well as letters representing the issuing authority's code. A license plate refers to the vehicle registration plate, which is a panel hung on both the front and rear of the vehicle. It is made of materials such as aluminum, plastic, or stickers, displaying the vehicle's registration number, registration region, or other basic information.
19
3
Share

What Are the Reasons for the Inability to Accelerate When Pressing the Throttle?

The reasons for the inability to accelerate when pressing the throttle are: 1. Air entering the fuel tank, causing insufficient fuel supply; 2. Clogged carbon canister, obstructing the fuel line; 3. Worn fuel pump push rod or lower rod screws; 4. Severe engine carbon buildup; 5. Insufficient fuel pump pressure. The solutions for the inability to accelerate when pressing the throttle are: 1. Remove engine carbon deposits; 2. Replace the fuel filter; 3. Replace the fuel pump; 4. Clean the carbon canister and fuel supply line. The function of the throttle: By controlling the amount of pedal depression, it regulates the engine throttle opening, controls the air intake, and the computer adjusts the fuel quantity, thereby controlling the engine speed.
18
0
Share

Should the Front Windshield of a Car Be Tinted?

Applying tint film to the front windshield of a car serves several purposes: 1. It blocks a significant amount of heat caused by infrared rays; 2. It reduces skin damage from UV rays and slows down the aging of the car's interior; 3. It effectively diminishes glaring and dazzling light. The tint film should be applied on the inside of the front windshield for the following reasons: 1. It avoids exposure to wind and rain, thereby extending its lifespan; 2. During use, it won't be subject to external scratches or peeling at the edges; 3. In the event of an accident, the film applied on the inside can hold shattered glass fragments together, preventing secondary injuries to the driver and passengers from broken glass pieces, thereby enhancing their safety.
17
4
Share

What is the Function of Brake Fluid?

Brake fluid functions by transmitting hydraulic pressure from the master cylinder to the wheel cylinders, where pistons are pushed out under the action of sealed rubber cups. This force is then applied to the brake discs and pads, enabling the braking function. Characteristics of brake fluid include: 1. Low freezing point: Ensures good fluidity in low-temperature conditions; 2. High boiling point: Prevents vapor lock formation under high temperatures; 3. Minimal quality degradation: Does not cause corrosion to metals or rubber. The replacement procedure for brake fluid is: 1. Position the vehicle over an inspection pit or lift it with a hoist; 2. Clean the drain port, remove the dust cap, loosen the drain screw, repeatedly depress the brake pedal until clear fluid emerges, then tighten the drain screw; 3. Refill with fresh brake fluid.
3
0
Share

Is the Peugeot 3008 an SUV?

Dongfeng Peugeot 3008 is an SUV. Below is more information about the Dongfeng Peugeot 3008: Dongfeng Peugeot 3008 Powertrain: The Dongfeng Peugeot 3008 is an SUV launched by Dongfeng Peugeot. In terms of power, this car is equipped with a 1.6T engine, which has a maximum power of 167 horsepower and a peak torque of 245 Nm. The transmission is matched with a 6-speed automatic manual transmission. Dongfeng Peugeot 3008 Configuration: In terms of configuration, the 2019 Peugeot 3008 comes standard with automatic start-stop, body stability system, hill assist, front dual airbags, side airbags, four-way adjustable multifunction steering wheel, electronic handbrake, etc. The higher-end models are also equipped with a panoramic sunroof, xenon headlights, fabric-leather combination seats, parking radar, side air curtains, and other configurations.
16
4
Share

What are the methods to distinguish between China V and China VI vehicles?

Methods to distinguish between China V and China VI vehicles: 1. Query on the Motor Vehicle Environmental Protection Website; 2. Inquire at the Vehicle Management Office; 3. Check the vehicle's environmental protection label; 4. Examine the vehicle's factory certificate. China V and China VI refer to standards established to implement the Environmental Protection Law of the People's Republic of China and the Air Pollution Prevention and Control Law of the People's Republic of China, aiming to prevent pollution from exhaust emissions of compression-ignition and gas-fueled ignition engine vehicles, protect the ecological environment, and safeguard human health. The differences between China V and China VI include: 1. Different implementation times: China V standard was implemented in December 2017; China VI standard was implemented in December 2014. 2. Different sulfur content regulations: China V standard stipulates no more than 10mg per kilogram; China VI standard stipulates no more than 50mg per kilogram.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.