How to Reverse into the Garage in Subject 2?
4 Answers
Here is the relevant introduction on how to reverse into the garage in Subject 2: 1. Keep an eye on the rearview mirrors: When reversing into the garage in Subject 2, always keep an eye on the left and right rearview mirrors. If you notice one side is wider, slightly turn the steering wheel in that direction to prevent the other side from crossing the line. Also, when initially determining the timing to fully turn the steering wheel, make sure to turn it decisively without hesitation. 2. Maintain distance: During the process of fully turning the steering wheel and reversing, the rear of the car gradually enters the garage. Just before entering, the wheels should maintain a distance of 30cm from the garage corner. Students should constantly observe through the rearview mirrors and make corrections if the distance is less than or greater than 30cm, otherwise, the line will definitely be crossed after entering the garage.
When practicing the reverse parking in Subject 2, I was always very nervous at the beginning of learning to drive. The instructor said I must go slowly and steadily, first observe the rearview mirror to find the alignment point. The car body should be parallel to the garage, with a distance of about one meter, then shift into reverse gear and gently press the clutch to control the speed, not too fast. When seeing the corner of the garage appear in the right rearview mirror, quickly turn the steering wheel to the limit position, letting the car slowly enter. After the car body is parallel to the garage line, straighten the direction and slowly reverse into the designated parking position. The key is not to panic, control the speed, and practice more to develop a feel. My first success came after trying more than ten times repeatedly before I got the hang of it. During regular practice, ask the instructor more to adjust the position. If you find the car is crooked, don’t panic, stop and make slight adjustments before continuing to reverse. During the test, don’t forget to adjust the seat and rearview mirror angle to ensure clear vision and reduce mistakes.
The key to reverse parking lies in identifying reference points and timing the steering wheel movements. Through multiple attempts, I've summarized several key points. Start about one meter away from the entrance, slowly reverse while keeping an eye on the right rearview mirror. As soon as the corner of the parking space appears, turn the steering wheel fully to allow the car to slide in smoothly. Maintain a steady speed using half-clutch control to avoid rushing too fast. If the car seems to deviate early, slightly adjust the steering and then turn fully again. Before straightening the wheels in the parking space, check both side mirrors to ensure the car body is aligned, making minor adjustments to avoid crossing lines. During practice, mark reference points on the ground to aid memory of steering directions. Approach the test with a relaxed mindset, treating it as practice. Different lighting angles in various parking spots can affect judgment, so try to simulate real conditions during training. Repeated practice will develop a feel for coordinating the steering wheel and brakes, making reverse parking smoother over time.
Safety first when taking the Subject 2 reverse parking test. Always observe the rear and sides to avoid collisions. Enter the area slowly, constantly checking the rearview mirror and looking over your shoulder to ensure no people or obstacles are present. If you make a mistake and the wheels touch the line, stop immediately—don't force the reverse to prevent scraping. During the test, wait until the car is completely stopped before making any moves; don't rush and risk instability. Mistakes during practice are normal—correct your position promptly and start over without getting discouraged. After parking, confirm the car is within the designated area without crossing front or rear lines to avoid failing. Develop steady and methodical habits to ensure peace of mind at every step.
