How to retract the rearview mirror of Mercedes-Benz GLC260?

2 Answers
DelJackson
09/03/25 2:46am
Mercedes-Benz GLC-260L rearview mirror adjustment is located on the door armrest. The owner needs to pay attention to first select the rearview mirror that needs to be adjusted, and then it can be adjusted in all directions. The following are the correct adjustment angles for the rearview mirrors: 1. Central rearview mirror: The rearview mirror should be parallel to the horizon, with the horizon positioned at the center 1/2 of the mirror surface. The mirror should slightly face the driver to ensure a clear view of the vehicles directly behind. 2. Left rearview mirror: Position adjustment: The horizon should appear at the center 1/2 of the rearview mirror, with the body of the car occupying 1/4 of the mirror. It is important to note that the reflection of the car body should not be too little, as it would be difficult to observe the actual situation of the vehicle closely following behind; nor should it be too much, as it would obstruct the view of vehicles in other lanes. 3. Right rearview mirror: Since it is on the right side, the driver's blind spot is larger, so the adjustment angle is different from the left rearview mirror. First, adjust the horizon to occupy 2/3 of the right rearview mirror, with the body of the car occupying 1/4 of the mirror.
Was this review help?
14
0
Share
McSerenity
09/15/25 4:29am
I've been driving a Mercedes-Benz GLC260 for two years, and folding the mirrors is incredibly simple. On the driver's side door panel, right next to the window control buttons, there's a separate button with a folding arrow symbol. Press it once, and the mirrors will retract smoothly; press it again to unfold them. There's also a hidden feature: enable 'Auto Fold on Lock' in the central control screen settings, and the mirrors will automatically fold when you remotely lock the car next time—super convenient. Avoid forcing them to fold in icy winter conditions to prevent motor damage. If they occasionally don't respond, try turning the engine off and on again; Mercedes' electronic system is quite reliable.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

How to resolve the C1035 fault code?

If the brake system warning light is illuminated in your car, it may indicate a potential issue with the anti-lock braking system (ABS). It is recommended to visit an auto repair shop and use an automotive diagnostic scanner to inspect the ABS system and read the fault code. Once the issue is identified, proceed with the necessary repairs based on the fault content. If it is an intermittent fault, use the automotive diagnostic scanner to clear the fault code.
5
3
Share

How to start a C2 automatic transmission car?

Turn on the turn signal switch and activate the left turn signal. Press the brake pedal, shift the transmission lever to "D" gear, honk the horn once, and release the handbrake. Observe the traffic conditions in front and behind again, making sure to check the left rear traffic situation through the left rearview mirror. Slowly release the brake pedal, gently press the accelerator pedal, and after starting onto the driving lane, turn off the turn signal by switching back the turn signal switch.
3
4
Share

How to Solve the Problem of Loud Tire Noise in CRV?

If it is tire noise, it is recommended to replace them with Michelin silent tires. If it is a new car and the noise feels very loud, you can add some sound insulation to the vehicle. The engine noise of the new model is a bit loud when accelerating, so you can go to a car decoration shop to explore some noise reduction modifications.
14
0
Share

How to Set Up Automatic Mirror Tilt When Reversing in CR-V?

Power on the vehicle but do not start the engine (press the start button without stepping on the brake). Select the side mirror you want to set by pressing the mirror adjustment selection button (left or right). Step on the brake, shift to R (Reverse) gear, and the selected mirror will automatically tilt down to the factory preset position. Adjust it to your desired position using the adjustment buttons. Press and hold the seat memory button (1, 2, or 3) for about 2 seconds, step on the brake, shift to P (Park) gear, and press the mirror adjustment selection button once more to complete the setup.
13
3
Share

How to activate the automatic window roll-up feature when locking the CT4?

The one-touch window control button is located on the door next to the driver's seat. Press the button upwards to the first stop, and release it when the window reaches the desired position. Briefly pull the switch to the second stop to automatically roll up the window.
12
1
Share

How to view the dashcam footage on C260L?

Press this button to enter the settings interface. In the recording interface, a short press can also turn the sound on or off. When powered off, press once to turn on. When powered on, press and hold to turn off. Switch between three functions: photo, video, and playback. In the video interface, this button can also be used to enable the forced save function. Downward selection in the menu bar is for lens zoom-out (4/3/2/1x). Upward selection in the menu bar is for lens zoom-in (1/2/3/4x). Use this button to turn the recording function on or off. Some dashcams also use the [OK] button instead.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.