How to Retract the Piston When Replacing Brake Pads?

1 Answers
GemmaFitz
07/29/25 10:55pm
In many cases, there is no need to press the brake pedal at all. With proper use, a set of brake pads can last up to 100,000 kilometers. To check if the brake pads have worn thin, you can use a small flashlight for inspection. If you notice that the black friction material on the brake pads is nearly worn out, it's time for replacement. If you hear a sharp metallic screeching sound during daily driving, this indicates that the warning metal piece on the brake pads has started to wear against the brake disc.
Was this review help?
16
1
Share
More Forum Discussions

What does TCM mean in cars?

TCM is the abbreviation for Transmission Control Module, which stands for Automatic Transmission Control Module. Here is some extended information about TCM: 1. The automotive automatic transmission control module is a compact functional unit. 2. This module integrates different standardized components together with the lowest part cost, smallest volume, and simplest interface. 3. Based on integration methods, these modules can be categorized into hydraulic modules, electronic modules, and electro-hydraulic modules. 4. TCM is used for shift control in automatic transmissions.
20
1
Share

Where is Skoda produced?

Skoda Auto is headquartered in Mlada Boleslav, Czech Republic (meaning 'young city' in Chinese), which is now a veritable automotive city in the Czech Republic. After Volkswagen Group acquired Skoda, a new factory was built in 1995 specifically for producing the Octavia and Fabia models. This nearly 100-year-old factory site is one of the oldest automobile plants in the world. The history of Skoda dates back to 1894, making it one of the five earliest car manufacturers in the world.
6
2
Share

How to Reset the Maintenance Light on an Older Volkswagen Bora?

The method to reset the maintenance light on an older Volkswagen Bora is as follows: 1. First, turn the key to the OFF position, ensuring all dashboard lights are off. 2. Press and hold the right [0.0/SET] button, then turn the key to the ON position. Continue holding the [0.0/SET] button, and the maintenance cycle indicator will enter reset mode. You can then restart the vehicle. 3. Release the [0.0/SET] button and press the left button within 20 seconds. Once the indicator returns to normal display, the maintenance light has been successfully reset.
9
3
Share

What causes the buzzing sound when the Civic reaches 70 mph?

When the Honda Civic reaches 70 mph and produces a buzzing sound, this situation may be caused by damaged or broken vehicle bearings during high-speed driving. It is necessary to pull over promptly. Inspect the vehicle and troubleshoot to avoid potential safety hazards for the driver and passengers, which could lead to safety accidents. The reasons for broken vehicle bearings are largely related to the quality of the bearings themselves. Bearings are composed of multiple components, and the quality of these parts can significantly affect the lifespan of the bearings, leading to premature damage or breakage. Additionally, poor lubrication, improper bearing assembly and adjustment, and poor personal driving habits can also cause vehicle bearing breakage.
14
2
Share

Where is the trunk button on the Tiguan?

The trunk button of the Tiguan is located below the driver's door. Lift this button upwards to open the vehicle's trunk. After opening, the trunk does not fully open; the lock releases slightly, allowing you to manually lift the trunk from its position. Here is some information about car trunks: 1. A car trunk, as the name suggests, is a space for storing spare items and transporting goods. 2. Typically, a trunk contains the car's spare tire, emergency kit, tool kit, warning triangle, fire extinguisher, car fridge, and the emergency release cable for the fuel tank cap.
16
4
Share

How to Determine When Volvo Tire Pressure Calibration is Complete?

When the Volvo system detects that the tire pressure is too low, the tires in the central display will change from gray to green. The system does not provide any additional confirmation of calibration completion. Here are some precautions for tire pressure calibration: 1. The vehicle must be stationary to click the calibration button. 2. After clicking calibration, the vehicle must be driven at a speed greater than 35 km/h for a period of time before the new tire pressure can be saved; otherwise, the icon will keep spinning. 3. If a spare tire is used, the tire pressure monitoring system may not function properly due to differences between the tires.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.