How to retake the subject one test immediately if failed?

1 Answers
DiVictoria
07/30/25 12:56am
If you fail the first attempt of the subject one test, you can directly proceed to the next test session on the spot by following the arrangements of the on-site staff. The subject one test does not limit the number of attempts. Each test provides two opportunities, and if both attempts are failed, you need to reschedule the test. Test procedure: Follow the staff's instructions and collect your driving school file in order at the waiting area; Carry and present your ID card for inspection by the supervising officer; Mobile phones must be turned off upon entering the test area; No loud noise is allowed in the test area; Regulation textbooks are not allowed in the test area (or should be kept in your bag); After the test, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the test area; Candidates who pass the test should sign under the guidance of the staff at the exit before leaving the test area; Candidates who fail the test can leave the test area immediately and wait for the driving school staff to notify them of the retake time.
Was this review help?
11
3
Share
More Forum Discussions

Can Burning Engine Oil Damage the Catalytic Converter?

Burning engine oil can damage the catalytic converter, which serves as an external purification device installed in the vehicle's exhaust system. It converts harmful gases such as carbon monoxide, hydrocarbons, and nitrogen oxides emitted from the vehicle's exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. Maintenance tips for the catalytic converter: 1. Avoid using leaded gasoline; 2. Avoid prolonged idling; 3. Do not let the engine speed fluctuate rapidly; 4. Avoid excessively delayed ignition timing; 5. Do not test for spark by pulling out the high-voltage wire for extended periods; 6. When measuring cylinder compression, disconnect the fuel pump's central control connector; 7. If any cylinder is found to be malfunctioning, stop the vehicle promptly to inspect and rectify the issue; 8. Do not disassemble it arbitrarily—ensure any replacement matches the engine specifications.
19
1
Share

Driving Techniques for Slippery Conditions on Snowy Uphill Roads

Driving techniques for slippery conditions on snowy uphill roads are as follows: 1. Use snow tires, which have specialized tread patterns designed to effectively enhance traction on snow-covered roads and improve driving safety. 2. Control your speed; snowy roads are very slippery, and the sensitivity of brake control will decrease. Maintain a steady speed and avoid sudden braking. 3. Make reasonable use of gears. Maintain a low gear when going uphill, as driving in a low gear allows the vehicle to pass smoothly on slopes. When going downhill, avoid coasting in neutral and do not slam on the brakes. 4. If your vehicle has a snow mode, activate it. The computer will control the engine to output power more gently, further preventing wheel spin when starting on icy or slippery surfaces.
7
4
Share

What are the reasons for OBD failure?

The reasons for OBD failure are: 1. caused by an outdated OBD system; 2. due to malfunctioning sensors in the OBD system; 3. engine failure. OBD stands for On-Board Diagnostics, which continuously monitors the vehicle's operating conditions during operation, working in conjunction with numerous sensors to monitor the engine's operating status and the performance of the exhaust treatment system in real time. OBD monitors the engine, catalytic converter, particulate filter, oxygen sensors, emission control system, fuel system, EGR system, and related components in real time. It connects to the ECU with various emission-related component information. When an emission fault occurs, the ECU records the fault information and related codes, and issues a warning through the malfunction indicator lamp to inform the vehicle owner.
19
2
Share

Can Tires Float on Water?

Yes, tires are made of rubber, and the density of rubber is lower than that of water, so they will definitely float. Below is relevant information: Introduction: Car tires are one of the important components of a vehicle. They directly contact the road surface and work together with the car suspension to mitigate the impacts encountered during driving, ensuring good ride comfort and smooth driving. They also ensure good adhesion between the wheels and the road surface, improve the vehicle's traction, braking, and off-road capability, and bear the weight of the car. The important role tires play in vehicles is increasingly being recognized. Tread Classification: Can be divided into ribbed tread, transverse tread tires, mixed tread tires, and off-road tread tires.
2
1
Share

How to reset the tire pressure warning light on the Roewe 360?

The method to reset the tire pressure warning light on the Roewe 360 is: Press and hold the tire pressure reset button located next to the gear control lever. Taking the 2018 Roewe 360 as an example, it is a compact car with body dimensions of 4579mm in length, 1804mm in width, and 1490mm in height, a wheelbase of 2660mm, a minimum ground clearance of 155mm, and a curb weight of 1340kg. The 2018 Roewe 360 is equipped with a 1.4T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 156PS, a maximum torque of 235Nm, and a maximum power of 115kW, paired with a 7-speed dual-clutch transmission.
19
2
Share

When Can You Enter the Left-Turn Waiting Zone at Traffic Lights?

Conditions for entering the left-turn waiting zone: 1. When both the straight and left-turn signals are red, left-turning vehicles are prohibited from entering the waiting zone and should queue behind the stop line until permitted to proceed. 2. When the straight signal in the same direction turns green (while the left-turn signal remains red), left-turning vehicles should enter the waiting zone in order and wait to turn left. When the left-turn signal subsequently turns green, vehicles in the waiting zone should proceed to turn left through the intersection in sequence. 3. When the left-turn signal is red (or yellow), left-turning vehicles that have not yet entered the waiting zone should stop behind the stop line and wait, and must not enter the waiting zone. Vehicles already in the waiting zone should continue to turn left through the intersection without stopping within the intersection, maintaining smooth traffic flow.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.