How to Restore the Dashboard Display When It Shows 'No Entries'?

1 Answers
DeJune
07/29/25 9:39am
Dashboard showing 'No Entries' indicates there are currently no tasks. Adjust using the right button on the multifunction steering wheel or the buttons on the right combination switch. For some models, long-pressing the reset button on the dashboard can switch the car's functions back, and the display will change after long-pressing. Below are some notes about indicator lights: 1. Engine warning light illuminated: If the vehicle stability control system and active air suspension warning lights are also illuminated, it generally indicates that certain vehicle functions will be lost. 2. Green indicator lights are status lights: They represent the working status of the vehicle. Indicators like the automatic transmission's power mode or the vehicle height adjustment's HINLO are not warning the driver but showing the vehicle's status. After understanding these rules, the driver can know which lights require immediate attention and which ones to stay vigilant about.
Was this review help?
15
4
Share
More Forum Discussions

How to adjust the clock in Sagitar?

Method to adjust the clock in Sagitar: 1. Without starting the engine, turn on the car's power supply, press and hold the left button on the instrument panel, release when the hour digits start blinking; 2. Use the right button to adjust the hour, then press the left button once to switch to minute adjustment; 3. After adjustment, turn off the power supply. The Sagitar comes equipped with features like fatigue driving reminder, knee airbags, cruise control, leather-wrapped steering wheel, front seat lumbar support adjustment, standard rear radar and LED lighting across all variants. In terms of active safety, the top and second-top variants are equipped with a pre-collision system.
19
4
Share

What are the causes of partial power loss in an engine?

Engine partial power loss can be caused by: 1. Faulty purge solenoid valve controlling fuel vapor emissions; 2. Malfunctioning air flow meter; 3. Faulty ignition coil; 4. Defective thermostat; 5. Failed catalytic converter; 6. Oxygen sensor malfunction; 7. Excessive carbon buildup in the electronic throttle body. An engine is a machine that converts other forms of energy into mechanical energy, first developed in England. It can refer to either the power generation unit or the entire machine including the power unit, such as gasoline engines or aircraft engines. Engine types include internal combustion engines (gasoline engines), external combustion engines, and electric motors.
13
3
Share

Can You Still Drive with a Transmission Warning Light On?

You can drive with a transmission warning light on, but if there are obvious transmission issues such as severe abnormal noises, intense shaking, or engine smoke, you should not continue driving. Instead, contact a repair shop and wait for assistance. There are four types of automatic transmissions: hydraulic automatic transmission, CVT continuously variable transmission, dual-clutch transmission, and automated manual transmission. Using an automatic transmission makes vehicle operation more convenient. Methods for changing transmission fluid: 1. Gravity drain method—loosen the oil pan bolt and allow the transmission fluid to drain out by gravity; 2. Machine flush method—store new transmission fluid in a flushing machine, connect the transmission to the machine via tubing, and use the machine to push out the old fluid with the new fluid; 3. Oil pan removal method—this also allows for cleaning the transmission fluid filter.
8
5
Share

Where is the Lynk & Co 05 produced?

Lynk & Co 05 is produced at the Yuyao factory. Lynk & Co is a Chinese brand, a premium automobile jointly developed by Geely Auto and Volvo Cars. The Lynk & Co 05 is a compact crossover SUV under the Lynk & Co brand. The dimensions of this vehicle are 4592mm in length, 1879mm in width, and 1628mm in height, with a wheelbase of 2734mm. The Lynk & Co 05 is equipped with a 2.0-liter turbocharged engine, which has a maximum power output at 5500 rpm and a maximum torque range between 1800 to 4800 rpm, delivering a maximum horsepower of 254 hp.
2
0
Share

What transmission is equipped in the Focus?

The Focus is equipped with a 6-speed manual transmission, paired with a 1.5L naturally aspirated engine. This engine delivers a maximum power of 90kW and a peak torque of 153Nm. It also features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. The Focus is a compact sedan under Changan Ford, with body dimensions of 4647mm in length, 1810mm in width, and 1468mm in height, and a wheelbase of 2705mm. It adopts a front-engine, front-wheel-drive layout. The front suspension employs a MacPherson strut independent suspension, while the rear suspension uses a torsion beam non-independent suspension.
15
0
Share

How to Set the Time in a Verna?

Verna setting the car time method: Press and hold the clock button until the numbers on the clock flash, rotate the knob to change the numbers, press the knob to switch the position of the adjusted number. After adjusting the time, press the knob again, and the clock numbers will stop flashing. The Verna has a body length, width, and height of 4300mm, 1705mm, and 1460mm respectively, with a wheelbase of 2570mm, and the drive mode is front-wheel drive. The Verna is equipped with a 1.4L naturally aspirated engine, matched with a 5-speed manual transmission. The maximum power of this engine is 70kw, and the maximum torque is 132.4nm.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.