How to Restore Factory Settings on the Mondeo Central Control?

How to Remove the Steering Wheel of a Citroen C4L?

The steering wheel is very easy to remove. Use a mirror to look at the back of the steering wheel, press downward with a small screwdriver, and the airbag claws will pop out by themselves. The three claws can be removed in seconds. Pay attention to the airbag wiring harness. First, pull the white lock outward, then pinch the yellow plug and pull it outward with force. After removing the airbag, you will see a V-shaped metal rod. The airbag claws are hooked onto it. For the original car's airbag wiring harness, unplug one and replace one to avoid mistakes. To remove the steering wheel, use an M12 spline. Hold the wheel with your left hand and apply slight force with your right hand, and it will come off.

12

0

Share

How is the GS4235T engine?

GS4235T is equipped with the Trumpchi Ti-POWER powertrain, with a maximum power output of 112 kW and a peak torque of 235 Nm. Here are the specific details about the Trumpchi GS4: 1. Vehicle positioning: The Trumpchi GS4 is a compact SUV under GAC Motor. 2. Configuration: The 235T model is paired with a 6-speed automatic transmission and four-wheel drive, featuring a plug-in hybrid system composed of a 1.5L Atkinson cycle engine and the G-MC electric coupling system. 3. Fuel consumption: The gasoline version of the GS4 has a fuel consumption of 6.8 liters per 100 km, while the hybrid version reduces it to as low as 4.6 liters per 100 km. The parts commonality rate reaches 50%, and it also comes with the ADiGO intelligent connectivity system and autonomous driving system.

17

2

Share

Why Doesn't the Dash Cam Record Continuously?

Here are the specific reasons why a dash cam may not record: 1. Motion detection is enabled: If motion detection is turned on, the dash cam will not record when the scene is static. Turn off this function and try again. 2. Memory card issues: The memory card may have insufficient speed, encounter errors while storing video files, or have other inherent problems. You can choose to format the memory card and then restore the dash cam to its initial settings. 3. Loop recording is not enabled: Loop recording divides videos into segments of a certain duration and stores them in the memory card. Once the memory card is full, the oldest video segments are automatically deleted. If loop recording is turned off, videos will not be automatically deleted and will continue to be stored in the dash cam until the storage space is full, causing the dash cam to stop recording. Enable loop recording and set the time to 3 or 5 minutes.

5

2

Share

How to Remove Adhesive Residue from Car Film?

Here are the specific methods for removing adhesive residue from car film: 1. Peel it off directly. Inferior quality film is easier to handle. For high-quality car film, professional tools are required for removal. The main professional tool is an adhesive removal knife to prevent scratching the car glass during the process. 2. Use vinegar. Apply vinegar evenly on the adhesive residue with a cotton swab. The vinegar will slowly spread between the glass and the adhesive. Then, scrape the adhesive residue back and forth with the cotton swab. 3. Use essential balm. Apply essential balm on the adhesive residue and then scrape it with a cotton swab. 4. Use alcohol. Brush alcohol onto the adhesive residue on the glass. Once it dissolves, gently peel off the adhesive residue by hand, and it will come off easily.

7

0

Share

Where is the air filter for the 2012 Sylphy located?

The air filter for the 2012 Sylphy is located inside the glove compartment on the passenger side. The steps to replace the air filter are as follows: 1. To replace the air filter, the glove compartment must first be removed. 2. Then, remove the three screws at the bottom of the glove compartment and open it. 3. At this point, you can see the cover of the air filter box inside the glove compartment. 4. The cover of the air filter box is a clip; gently push the clip to remove the cover, and you will see the filter. 5. The filter has a pull tab; gently pull it, and the filter will come out. 6. Take out the old filter and insert the new one (pay attention to the installation direction). 7. Finally, replace the filter box cover and put the glove compartment back in place.

8

2

Share

What is the normal oil temperature for BMW?

An oil temperature of 100 degrees is normal, as the working temperature of engine oil generally ranges between 70 to 90 degrees. Below is relevant information about automotive engine oil: Functions of engine oil: Alleviates friction and high temperatures, reduces gas leakage, prevents contamination from external sources, shields components from contact with water, air, acidic harmful gases, cushions pressure surges in engine cylinders, and cleans dirt generated on component surfaces. Introduction to engine oil: Engine oil, also known as engine lubricant, serves to lubricate and reduce wear, assist in cooling, seal against leaks, prevent rust and corrosion, and dampen vibrations in the engine. It is often referred to as the 'blood' of a car. Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of lubricants, determining their fundamental properties, while additives compensate for and enhance the performance shortcomings of the base oil, imparting new characteristics, making them a crucial part of lubricants.

2

1

Share

How to Restore Factory Settings on the Mondeo Central Control?

How to Remove the Steering Wheel of a Citroen C4L?

How is the GS4235T engine?

Why Doesn't the Dash Cam Record Continuously?

How to Remove Adhesive Residue from Car Film?

Where is the air filter for the 2012 Sylphy located?

What is the normal oil temperature for BMW?

How to Repair a Dropped Car Headliner?

What to Do When There's White Lime on the Car That Can't Be Wiped Off?

What is the function of the rearview mirror?

How to turn off the VSA vehicle stability control system light?