How to Restore a Frozen Center Control Screen in the Boyue?

Is it necessary to apply a protective film on the car body?

It is not necessary to apply a protective film on the car body for the following reasons: 1. Over time, the film can adhere to the car paint, potentially damaging the car's finish. 2. In the event of an accident, if the car body film is damaged, insurance will not cover the repair costs. 3. The film may discolor over time, affecting the car's appearance. Information about car films is as follows: 1. Car film (Auto-film) refers to a thin layer applied to the front and rear windshields, side windows, and sunroof of a vehicle. This layer is also known as solar film or heat-insulating film. 2. The main functions of car films are to block ultraviolet rays, reduce heat, prevent injuries from shattered glass, reduce glare, and, due to the one-way visibility of the film, protect personal privacy.

17

1

Share

Which car models use the Blue Whale engine?

Car models equipped with the Blue Whale engine include: Changan CS75 PLUS, Changan CS35 PLUS Blue Whale Edition, and Eado Blue Whale Edition. Below are the relevant details: 1. The Blue Whale high-pressure direct injection engine is developed by Changan's Blue Whale platform, integrating 14 advanced technologies. It achieves a perfect balance of power enhancement, fuel consumption reduction, and NVH noise reduction technology. This engine complies with the China VI emission standards. 2. Taking the Changan CS75 PLUS as an example, its body dimensions are 4700mm in length, 1865mm in width, and 1700mm in height, with a wheelbase of 2710mm. The Changan CS75 PLUS features dual 12.3-inch full HD retina screens combined with a left touch screen, enabling a triple-screen display operation.

13

5

Share

What type of oil is used for the Maxus G10?

The original oil is the oil used for the Maxus G10, with the oil model being 5W-30. In terms of applicability, the original oil is more suitable for the engine. However, depending on different needs, oil can also have other functions, such as noise reduction, fuel efficiency, and performance enhancement. Therefore, you can also choose oils from brands like Mobil, Shell, and Castrol. The viscosity of the oil changes with temperature, so special attention is needed to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother for the car. The latter number represents the kinematic viscosity of the oil at 100°C. The higher the number, the better the oil can maintain its viscosity index at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the oil in the Maxus G10 is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan. Use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out. Use a special wrench to remove the oil filter. Apply oil to the seal of the new oil filter and tighten it clockwise by hand. Add the new oil through the oil filler cap on the engine valve cover, typically filling about three-quarters of a bottle. Start the engine and let it run for 5 minutes, checking for oil leaks around the drain plug and oil filter. If there are leaks, perform necessary repairs. After stopping the engine, pull out the dipstick to check that the oil level is within the standard range.

6

4

Share

How to Test a Three-Wire Crankshaft Position Sensor?

The function of the crankshaft position sensor is to determine the position of the crankshaft, which refers to the rotation angle of the crankshaft. Below is relevant information: 1. It typically works in conjunction with the camshaft position sensor to determine the basic ignition timing. Generally, there are three types of crankshaft position sensors: magnetic induction, Hall effect, and optical. 2. Taking the testing method of the General Buick 1.6L crankshaft position sensor as an example: Turn off the ignition switch, disconnect the crankshaft position sensor connector, and measure the resistance between terminal 1 and terminal 2 of the sensor, which should be between 400–600Ω. If the reading is outside this range, the crankshaft position sensor itself may be faulty and should be replaced. The two signal wires of the crankshaft position sensor are insulated from the shielding wire.

18

1

Share

Why does the car shake violently after starting?

The most common reason for severe shaking after starting the car is a dirty throttle body or excessive carbon buildup in the fuel injectors, which causes the engine's combustible mixture to fluctuate between lean and rich, resulting in idle shaking after a cold start. Below is relevant information: 1. There are many reasons for car shaking after starting, such as a dirty air filter, broken high-voltage wires, abnormal water temperature, clogged fuel injectors, carbon deposits, and oil sludge blockages, all of which can cause the car to shake. 2. Dirty air filter: The air filter is designed to protect the engine and reduce wear. It is generally replaced every 10,000 kilometers. If not replaced in time, insufficient air intake can cause low idle speed, leading to engine shaking. Simply replacing the filter can solve the problem. 3. Broken high-voltage wires: Broken high-voltage wires refer to the interruption of the wire core, which can affect ignition and cause engine shaking. Use a multimeter to measure the resistance and replace the one with significantly higher resistance.

13

5

Share

What to Do When the Push-Start Button Doesn't Work?

The reasons why the push-start button doesn't work are as follows: 1. The steering wheel is locked. The steering wheel lock is a simple anti-theft feature. When the car is turned off, turning the steering wheel a certain angle from its centered position will cause it to lock with a "click" sound. In this state, the push-start function won't work. Solution: Turn the steering wheel left and right while pressing the push-start button to release the tension and unlock the steering wheel. 2. The gear is not in P (Park) position. Solution: Shift the gear into P position. For automatic transmission vehicles (AT, CVT, AMT), ensure the gear is in P position when starting. 3. The smart key battery is dead. When the smart key's battery is depleted, its signal strength becomes very weak, making it difficult for the car's sensor to detect it, preventing the push-start from working. Solution: Most smart keys come with a mechanical key; you can directly insert the mechanical key into the ignition slot to start the car.

14

5

Share

How to Restore a Frozen Center Control Screen in the Boyue?

Is it necessary to apply a protective film on the car body?

Which car models use the Blue Whale engine?

What type of oil is used for the Maxus G10?

How to Test a Three-Wire Crankshaft Position Sensor?

Why does the car shake violently after starting?

What to Do When the Push-Start Button Doesn't Work?

Should You Shift to N or P Gear First After Parking?

How to adjust the time on the City's clock?

What is the minimum ground clearance of the Chevrolet Cavalier?

Is the GAC Trumpchi Shadow Leopard Track Edition for Sale?