How to restart Audi MMI?

What to Do When the Fuel Tank Cap of FAW-Volkswagen Tayron Won't Pop Open?

If the fuel tank cap of FAW-Volkswagen Tayron won't pop open, you can use the emergency switch. The emergency switch is located inside the right side of the trunk. The specific operation method is as follows: 1. Remove the liner covering the fuel tank inside the trunk to expose the locking mechanism of the fuel tank cap, along with the remote-operated cable for the fuel tank cap. 2. Simply pull the cable to open the fuel tank cap. 3. If the fuel tank cap still won't pop open, it is recommended to have a professional handle it. After opening the fuel tank cap, be sure to check whether the fuel tank cap locking motor is damaged. Common causes include damage or jamming of the fuel tank cap locking motor.

18

2

Share

What is the charging power of the BYD Tang DM?

The charging power of the BYD Tang DM is 7kw. It takes approximately 22 kWh to charge from 15% to 100% battery capacity. More details about the BYD Tang DM are as follows: 1. The BYD Tang DM is a plug-in hybrid electric vehicle. 2. Conventional hybrid vehicles do not require separate charging for the battery, as the engine charges the battery pack while driving. However, plug-in hybrid electric vehicles need to charge the battery pack separately because these hybrids have larger battery packs and more powerful motors. 3. The BYD Tang DM is equipped with a 2.0-liter turbocharged engine, with the model code BYD487ZQA. This engine has a maximum power of 151kw, a maximum torque of 320 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed ranging from 1750 to 4500 rpm. The engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 6-speed dual-clutch transmission. 4. The Tang DM adopts a dual-motor configuration, with a combined motor power of 290kw and a combined torque of 630 Nm. The front motor has a maximum power of 110kw and a maximum torque of 250 Nm, while the rear motor has a maximum power of 180kw and a maximum torque of 380 Nm. The Tang DM uses a ternary lithium battery.

18

2

Share

What to Pay Attention to When Inspecting a New Car?

When inspecting a new car, the following aspects should be noted: 1. Documentation Check: Including: purchase invoice, vehicle certificate, warranty service card, vehicle user manual, factory certificate/vehicle factory inspection sheet. Some vehicles may have separate engine user manuals and spare keys, while certain optional equipment for some vehicles may have specific requirements or regulations. In such cases, consumers should request relevant documentation from the dealer. 2. Exterior Detail Inspection: Some comprehensive dealers may sell test drive cars, inventory cars, or accident-damaged cars as new vehicles to consumers, concealing the vehicle's origin and offering seemingly attractive discounts to pass them off as new cars when they are actually unwanted accident vehicles. Additionally, some comprehensive dealers may take advantage of consumers' lack of familiarity with vehicle models by selling base models as high-end models to gain more profit. Therefore, consumers must be meticulous when inspecting the vehicle.

20

3

Share

Is it necessary to wear seat belts in the rear seats of a vehicle?

Sitting in the rear seats of a car requires wearing a seat belt. Article 51 of China's 'Road Traffic Safety Law' stipulates that when a motor vehicle is in motion, both the driver and passengers must use seat belts as required. Therefore, during vehicle operation, if the driver or passengers fail to wear seat belts, it constitutes a violation of the law. More details are as follows: 1. Not wearing a seat belt in the rear seats not only seriously threatens the safety of the front-seat occupants but also poses safety risks to oneself. 2. In the event of an accident, without the protection of a seat belt, rear-seat passengers may directly impact the front seat backs, resulting in injuries to the nose, arms, neck, and other areas.

2

5

Share

What is the method for replacing the coolant in a Cruze?

The method for replacing the coolant in a Cruze is as follows: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a particular focus on the five-way water pipe. The five-way pipe is named for its five connection points to various parts, and the coolant flows through it to be distributed to different sections of the car to perform its function. If there is any leakage of coolant in this area, the water pipe should be replaced or the connection re-secured as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continue filling the reservoir so that the water flows continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out of the reservoir will be slightly pinkish. Continue adding clean water until the outflow is clear. Note: Remember to disconnect the heater hose and drain the water from the heater core. Approximately one hour after draining, add the new coolant through the radiator hose. This allows the coolant to flow quickly into the radiator. Then, add another container of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the coolant level will drop. Add more coolant until it reaches the "MAXT" mark on the reservoir.

16

1

Share

What are the differences between the Odyssey and Elysion?

The Odyssey is a vehicle launched by Honda, which was released nationwide in January 2007. It is equipped with a satellite navigation system, featuring an 8-inch large display screen and voice guidance functions, and uses a high-performance 2.4L i-VTEC engine with variable valve timing and lift. Differences between the Elysion and Odyssey: Manufacturers differ: The Elysion belongs to Dongfeng Honda; the Odyssey belongs to GAC Honda. Body dimensions differ: Latest Odyssey model: Body length is 4816mm, width 1820mm, height 1712mm, wheelbase 2900mm, equipped with a 2.0L naturally aspirated engine, maximum horsepower 146 hp, maximum power 107 kW, maximum torque 175 Nm. Latest Elysion model: Body length is 4951mm, width 1842mm, height 1711mm, wheelbase 2900mm, equipped with a 2.0L naturally aspirated engine, maximum horsepower 146 hp, maximum power 107 kW, maximum torque 175 Nm. Curb weight differs: The Elysion's curb weight is 1941 kg. The Odyssey's curb weight is 1822 kg.

1

4

Share

How to restart Audi MMI?

What to Do When the Fuel Tank Cap of FAW-Volkswagen Tayron Won't Pop Open?

What is the charging power of the BYD Tang DM?

What to Pay Attention to When Inspecting a New Car?

Is it necessary to wear seat belts in the rear seats of a vehicle?

What is the method for replacing the coolant in a Cruze?

What are the differences between the Odyssey and Elysion?

What documents are required for replacing the supplementary page of a vehicle license?

What are the differences between the 5-seater and 7-seater Wuling Zhiguang?

Do I need to go to a 4S shop to change transmission oil?

How Many Years Can a Vehicle Be Driven Before Scrapping?