How to resolve the yellow 'P' with a slash on the dashboard?
2 Answers
The warning light 'P' with a slash indicates a fault in the electronic parking brake, which requires resetting. Below is an introduction to the electronic parking brake: 1. Function of the electronic parking brake: The parking brake is used to stabilize the vehicle after it has come to a stop, preventing accidents caused by rolling on inclined surfaces. Some automatic transmission models on the market feature a foot brake near the driver's left foot, which serves the same function as a handbrake. Certain advanced models are also equipped with an electronic parking brake system. 2. Method to reset the electronic parking brake: Turn on the car key, press down on the foot brake, then hold down the electronic parking brake for 5 seconds, followed by pulling it up for another 5 seconds. This completes the initialization and reset of the electronic parking brake.
I've encountered this warning light before—it's actually a reminder that the electronic parking brake isn't fully released. First, try turning off the engine, waiting 10 seconds, and restarting the vehicle. Sometimes the onboard computer glitches and gives false alerts. If the light remains on, manually press the electronic parking brake button several times while listening carefully for the humming sound of the motor working in the rear wheels. If there's no sound at all, it's likely the button switch is stuck or a fuse has blown. Last time, I fixed it myself by disassembling the center console and spraying some WD-40 to lubricate the button, but if you're not confident in your DIY skills, it's safer to go straight to an auto repair shop. Remember not to blast the gear lever area with a high-pressure water jet during car washes, as this can easily cause water ingress and short-circuit the switches.
