How to resolve the P with a slash fault light?

1 Answers
DeEva
07/28/25 3:22pm
The P with a slash fault light indicates a malfunction in the electronic parking brake, which requires a reset of the electronic parking system. The reset steps are as follows: 1. Start the car and press the foot brake. 2. Press down the electronic handbrake for 5 seconds. 3. Pull up the electronic handbrake for 5 seconds. The operation sequence for the parking brake is as follows: 1. Engage the parking brake. 2. For manual transmission cars, place the gear lever in the 1st or 'R' position; for automatic transmission cars, place the gear lever in the 'P' position. 3. Turn off the engine, exit the vehicle, and place wheel chocks under the wheels.
Was this review help?
3
2
Share
More Forum Discussions

What does the Audi warning mean?

Audi's pre-sense warning is a collision prevention system designed to protect the driver. It helps prevent driver fatigue and alerts the driver with intermittent light braking or warning sounds when there is a risk of collision or lane departure. However, it is primarily an assistive feature and has certain limitations, such as road and weather conditions. Below is additional information about the pre-sense system: 1. Front: The pre-sense system uses radar sensor data to calculate the likelihood of an accident. Within the system's operational range, it can detect collision risks with other vehicles or pedestrians. In such cases, the system warns the driver through visual and auditory signals, and may also apply partial or full braking to reduce impact speed or avoid a collision. In vehicles equipped with the basic version of the pre-sense system, the front seat belts may also be pre-tensioned if necessary. The front Audi pre-sense system remains active even when the adaptive cruise control is turned off. 2. Rear: The cross-traffic assist system has its limitations and may not always provide a warning in every situation.
15
5
Share

Are There 6-Seater Cars?

Actually, there are 6-seater cars, but they are relatively rare in the market and not commonly seen. Here is some extended information about the differences between 6-seater and 7-seater cars: 1. Different seating capacity: A 6-seater car has six seats, while a 7-seater car has seven seats. 2. Different inspection schedules: For a 6-seater car, the first six years after purchase are exempt from inspection; for a 7-seater car, an inspection is required every two years after purchase. Both 6-seater and 7-seater cars belong to the category of small vehicles and are typically used in MPV and SUV models. Both types can be driven with a C1 driver's license. The biggest advantage of a 6-seater MPV lies in its inspection schedule. According to the current "Opinions on Strengthening and Improving Motor Vehicle Inspection Work," it is explicitly stated that non-commercial 6-seater models are exempt from inspection for six years, while 7-seater models are not included in this exemption.
10
4
Share

What are the reasons why the Kia K2 seatbelt cannot be pulled out?

Reasons why the Kia K2 seatbelt cannot be pulled out: 1. The seatbelt is stuck; 2. Mechanical failure has occurred. The Kia K2 is a compact car under Dongfeng Yueda, with exterior dimensions of 4400mm in length, 1740mm in width, and 1460mm in height, a wheelbase of 2600mm, and a body structure of a 4-door, 5-seater sedan. The Kia K2 is equipped with a 1.4L naturally aspirated engine, paired with a 6-speed manual transmission, delivering a maximum horsepower of 100 hp, a maximum power of 73.3 kW, a maximum power speed of 6300 rpm, and a maximum torque of 132.4 Nm. It features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
8
5
Share

Where is the fuel tank located on a Porsche?

The fuel tank of a Porsche is located under the front hood, on the left side. The fuel tank cap button and the car door share the same locking system. If the car door lock is in the open state, the fuel tank cap can be opened with a light press. Conversely, if the central door lock is engaged, the fuel tank cap cannot be opened. Relevant information about automobile fuel tanks is as follows: 1. Introduction: The automobile fuel tank is the full name of the car's fuel container. Currently, with the development of the automotive industry and the revitalization of the domestic automobile sector, the demand for automobile fuel tanks from major automobile manufacturers has shown a significant upward trend. 2. Design Principle: Utilizing the heat energy generated by the engine during operation, an additional thermal circulation system is installed between the engine, fuel tank, and radiator. The original single fuel tank design is modified into a combined fuel tank system consisting of a main tank and an auxiliary tank.
7
2
Share

Which line should be aligned when reversing into the parking space?

When reversing into the parking space, align with the white border line. More information about reversing into the parking space is as follows: 1. Introduction: Reversing into the parking space is a mandatory test item for obtaining a small car driver's license after 2013. It assesses the driver's ability to operate the vehicle in a confined space. Reversing into the parking space is a key assessment point in the driver's test, which involves correctly reversing the vehicle into the garage from both sides while in motion. 2. Methods: For 'non-character type' reversing into the parking space, the vehicle should be perpendicular to the target parking space. Using the B-pillar of your vehicle as a reference and the first parking space as a marker, you can generally reverse into the third parking space. For 'linear type' parallel parking, use the front vehicle as a reference, align the body, turn the steering wheel to the right, and when the angle between the two vehicles reaches 45 degrees, observe and adjust the steering wheel while reversing. If estimated correctly, you can complete the parking in one go.
12
4
Share

Is it necessary to go to a 4S store for BMW's first maintenance?

It is recommended to go to a 4S store for maintenance during the vehicle warranty period. BMW maintenance parts are generally not available outside, and there are usually no problems during the warranty period. If the maintenance personnel suggest replacing parts, you can decide whether to replace them yourself. Non-critical parts do not need to be replaced. Generally, BMW new cars require their first maintenance at 10,000 kilometers or 12 months. Below are specific details about BMW maintenance: 1. Replacement intervals: The maintenance cycle for all BMW models is 10,000 kilometers. Engine oil and oil filters must be replaced during each maintenance. Air filters, cabin air filters, and fuel filters are recommended to be replaced every 20,000 kilometers. Spark plugs are recommended to be replaced every 50,000 kilometers. Brake fluid should be replaced every two years. 2. Notes: Additionally, the transmissions and power steering systems of all BMW models are designed for lifetime maintenance-free, so there is no need to replace transmission oil or power steering fluid. During the break-in period, since the gears of the engine, transmission, etc., have not yet fully broken in smoothly, it is generally advised not to drive too fast—absolutely do not exceed 100 km/h, and it is best not to exceed 80 km/h.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.